Before You Begin; Using Queue Folders (Queue Properties); Creating A Folder For Saving Ps Files - Roland SC-545EXW Manual

Before You Begin

Read this section before you get started with the following chapters.

Using Queue Folders (Queue Properties)

Roland VersaWorks has two "queue folders", labeled A and B, in its main window. You can assign a set of default print
settings (queue properties) to each of these folders, and print files quickly by using the settings you have made within
either of the folders.
When you use the printer to print an image that has both CMYK color data and white data, it is recommended to use
the queue folders in the following manner.
Queue folder A ............ Use this folder to assign a set of default settings for printing CMYK color data.
Queue folder B ............ Use this folder to assign a set of default settings for printing white data.
All the operations in this guide assume that you use each of the queue folders in the manner described above.

Creating a Folder for Saving PS Files

Before you actually print an image you draw using application software such as Adobe Illustrator, it is necessary to
save the image as a PS file(s). And then, you can print the image by loading the PS file(s) on Roland VersaWorks.
Because of this, you should create a folder for saving PS files in advance. It is recommended to locate the folder in the
root directory on your computer's local disk.
❶
Open [My Computer], and then open [Local Disk (C:)].
❷
On the [File] menu, click [New], and then click [Folder].
❸
Enter the name for the folder, and then press the Enter key.
G Here you name "white_print", for example.
3