Table of Contents
Advertisement
5.
In the Queue B Job List, drag and drop the PS file.
❶
Click the [Queue B] tab in the main window so that the title above the tab changes to "Job List -
Queue B".
❷
Click the PS file that you created in step
button).
6.
Click
to start printing.
G After printing is complete, it takes approximately 15 minutes to dry out the media.
Printing Only CMYK Color Data
1.
Prepare the printer.
❶
Press the [MENU] key and make the "EDGE DETECTION" item to "DISABLE".
❷
Load transparent media into the printer.
G When the media you are loading into the printer warps or partially floats from the platen, load it into the
printer so that its front end goes about 20 cm (8 in.) from the starting edge of the print area.
G Be sure to use the media clamps when you load media.
2.
Prepare the image files for printing.
Draw an image using application software such as Adobe Illustrator, and then save the image as a PS file.
3.
Start up Roland VersaWorks on your computer.
Check the printer model and status in the main window.
2
, drag it in the job list, and then drop it (release the mouse
1-2 Printing on Transparent Media
17
Advertisement
Table of Contents
