Cup Holder Removal Installation And Cleaning; Securing The Pillow - Baby Trend Trooper CV01 Owner's Manual

5.0 Installation and Use
5.16 Cup Holder Removal,
Installation and Cleaning.
Removal
- Press tab on bottom of cup
holder to release cup holder and
pull up to remove (Fig. 47a).
Installation
- Pull car seat cover back to expose
cup holder receptacle (Fig. 47b).
- Align cup holder and press into
place. Pull up on cup holder to ensure
the cup holder is secured (Fig. 47c).
- Fit car seat cover over the front of the
cup holder and fit the car seat cover
over the cup holder (Fig. 47d).
Cleaning
- Wipe with mild solution of soap
and water.
- Rinse with clean water.
- Never use "household" detergents
or solvents.
47
Fig. 47a
Fig. 47b
Fig. 47c
Fig. 47d
Copyright © 2021, Baby Trend, Inc.
5.17 Securing Pillow
1. Insert pillow attachment straps
through the appropriate shoulder
belt position (Fig. 48a).
2. Secure attachment straps with
the hook and loop fasteners
(Fig. 48b).
5.18 Pool Noodle or Rolled
Towel Use Extra Elevation
1. A pool noodle or rolled towel can
be used for extra elevation.
2. Place the noodle or rolled towel
where the seat bottom and seat
back meet for additional recline
elevation (Fig. 48c).
3. Place the noodle or rolled towel
at back of the car seat bottom for
additional incline elevation
(Fig. 48d).
4. Multiple pool noodles or towels
maybe secured together for
elevation (Fig. 48e).
Copyright © 2021, Baby Trend, Inc.
5.0 Installation and Use
5
4
Fig. 48a
5
4
3 3
Fig. 48b
Fig. 48c
Fig. 48d
Fig. 48e
48