Honeywell Gamewell FCI S3 Series Manual page 57

Table 9.1 lists the System Power/Size currents.
Power
Primary
(Power Supply)
Secondary
(Backup)
NOTE: * The asterisk indicates that the current is based on the Battery Calculation for 4-72
hours Standby Service.
Table 9.2 lists the System Capacity
Accessories/Sub-Assemblies/
Networked panels
Monitor and Control Modules
Detectors
Initiating Device Circuits (SLC)
S3 Series UL Listing Document — P/N LS10005-051GF-E:D3 3/09/2016
Section 9: System Power/Size
Max. AH Derating
Current Capacity
7 A 55 A/H .2
7 A 55 A/H
Table 9.1 Power Supply Currents
.
Devices
318 Modules
318 Sensors
128 SLC Circuits for a Single-Ring
Network
244 SLC Circuits for a Multi-Ring
Network
Table 9.2 System Capacity
Factor Max. Standby Max. Alarm
Current Current
*3.5 amps *7 amps
max. Alarm max.
continuous continuous
Standby
(when the
FLPS-7 is
used with the
SLP-E3).
1.4 amps 7 amps
max.
Maximum System Capacity
SLC-PM
(System Sensor Devices)
Max. Max. Alarm Max.
Standby Duration Charging
Time Current
N/A N/A 1 amp
24 Hour 5 Minutes N/A
SLC95-PM
(Apollo Devices)
252 Modules/Detectors
128 SLC Circuits for a Single-Ring
Network
244 SLC Circuits for a Multi-Ring
Network
57