Setting The File Number (File No.) - Samsung VP-DC171I Owner's Instruction Book

Digital Still Camera Mode (VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)

Setting the File Number (File No.)

 File Number setting works only in M.Cam Mode. page 26
 File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
 File numbers may be set as follows:
- Series: When there are existing files, the new image will be named as the next number in the sequence.
- Reset: When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select <Memory>, then press the [Joystick].
5. Move the [Joystick] up or down to select <File No.>, then press the [Joystick].
6. Move the [Joystick] up or down to select the desired option (Series or Reset), then
press the [Joystick].
 The selected option is applied.
7. To exit, press the [MENU] button.
Note
When you set <File No.> to <Series>, each file is assigned with a different number so as to
avoid duplicating file names.
It is convenient when you want to manage your files on a PC.
(Camera)].
ENGLISH
4
M.Cam Mode
►Memory
Photo Quality ►Super Fine
File No.
►Series
Move OK Select MENU
6
M.Cam Mode
►Memory
Photo Quality
File No.
Series
Reset
Move OK Select MENU
Exit
Exit
93