Setting The Custom White Balance - Samsung VP-DC171I Owner's Instruction Book

DVD Camcorder: Advanced Recording

Setting the Custom White Balance

 You can adjust the white balance as you wish based on the recording environment.
1. Set the [Mode] switch to [DISC] or [CARD].
(VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)
2. Set the [Power] switch to [
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select <Camera>, then press the [Joystick].
5. Move the [Joystick] up or down to select <White Balance>, then press the [Joystick].
6. Move the [Joystick] up or down to select <Custom WB>, then press the [Joystick].
 The <Set White Balance> will blink.
7. Place the subject under the desired lighting, then press the [Joystick].
 The <Set White Balance> will disappear and the white balance setting will
commence.
8. To exit, press the [MENU] button.
 Custom WB icon (
Notes
 You can directly access the White Balance function by using the [Q.MENU] button.
page 27
 The White Balance function will not operate in EASY.Q mode.
 Turn the Digital Zoom off (if necessary) to set a more accurate white balance.
 Reset the white balance if lighting conditions change.
 During normal outdoor recording, setting to Auto may provide better results.
(Camera)].
) is displayed.
ENGLISH
6
Camera Mode
►Camera
Program AE
White Balance
Auto
Digital Effect Indoor
Shutter Outdoor
Exposure Custom WB
16:9 Wide
▼
Move OK Select MENU
Set White Balance
OK MENU
Select
8
SP
STBY
30 min
A
Exit
Exit
57