Connecting A Power Source; Using A Household Power Source - Samsung VP-DC171I Owner's Instruction Book

Preparation

Connecting a Power Source

 There are two types of power source that can be connected to your DVD Camcorder.
- The AC Power adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.

Using a Household Power Source

Connect to a household power source to use the DVD Camcorder without having to worry about the battery power. You can
keep the Battery Pack attached; the battery power will not be consumed.
1. Connect the AC Power adapter (AA-E9 TYPE) to a wall
socket.
The plug and wall socket type may differ according to
your resident country.
2. Open the DC IN Jack Cover.
3. Connect the DC cable to the DC IN jack of the DVD
Camcorder.
4. Set the DVD Camcorder to each mode by holding down
the Green Tab on the [Power] switch and turning the
[Power] switch to [ON] or [OFF].
ENGLISH
Power Switch
25