Installing A Network Option; Installing A Network Interface Card - Samsung SCX-5115 User Manual

A.2
I N
NSTALLING A

Installing a Network Interface Card

To install an optional network interface card, take the following
steps:
C :
AUTIONS
• DISCONNECT THE POWER CORD. Never remove the control
board while the printer is plugged in. To avoid the possibility of
an electrical shock, always disconnect the power cord when
installing or removing ANY printer options.
• DISCHARGE STATIC ELECTRICITY. The control board and the
interface card are sensitive to static electricity. Before installing
or removing the card, discharge static electricity from your body
by touching something metal, such as the metal back plate on
any device plugged into a grounded power source. If you walk
around before finishing installation, discharge any static
electricity once again.
1
Unpack the network interface card. Make sure that there is
no missing or damaged part.
œ¤Network
Interface Card
2
Turn your machine off and unplug the power cord and all of
cables from the machine.
3
Remove the six screws from the back of the machine.
O
ETWORK PTION
œ¤SyncThru CD-ROM
and User's Guide