Sending A Fax In Toll Save Time; Adding Documents To A Reserved Delay Fax Job; Forwarding A Received Fax To Other Destination; Forwarding A Sent Fax To Other Destination By A Fax - Samsung CLX-8385NX Series User Manual

Sending a fax in toll save time

You can set the machine to send a fax in toll save time to save a
telephone fee. If you send a fax after setting this feature, fax data will be
stored in machine's memory and the machine will start to send fax in toll
save time.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, enter
2
password and press OK. (Page 3.5)
Press the Setup tab > Fax Setup.
3
Press down arrow on the right side.
4
Press Toll Save.
5
Press On.
6
Press Start Time and set the start date and time with left/right
7
arrows.
Press OK.
8
Press End Time and set the end date and time with left/right arrows.
9
10 Press OK.

Adding documents to a reserved delay fax job

You can add additional documents to the delayed fax job which is saved
in memory.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, enter
2
password and press OK. (Page 3.5)
Press the Setup tab > Fax Setup.
3
Press down arrow on the right side.
4
Press Send Batch.
5
Press On.
6
Press OK.
7
When you send a fax, if a fax number is same as the number in
delay fax, the machine asks whether you want to add more
documents to reserved delay fax.

Forwarding a received fax to other destination

You can set the machine to forward the received or sent fax to other
destination by a fax or an email. If you are out of office but have to receive
the fax, this feature may be useful.
Note
• When you forward a fax by an email, you firstly set the mail
server and IP address in SyncThru Web Service.
• If this Fax Forward Settings feature to On, you cannot use a
fax with the On Hook Dial button on the control panel.

Forwarding a sent fax to other destination by a fax

You can set the machine to forward every fax you sent to other
destination by faxing.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, enter
2
password and press OK. (Page 3.5)
Press the Setup tab > Fax Setup.
3
Press down arrow on the right side.
4
Press Fax Forward Settings > Forward to Fax Setting > Send
5
Forward.
Press On and enter a fax number using the keypad on the control
6
panel.
Press OK.
7

Forwarding a received fax to other destination by a fax

With this feature, you can forward every fax you received to other
destination by faxing. When the machine receives a fax, a fax is stored in
the memory then, the machine sends it to the destination you have set.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, enter
2
password and press OK. (Page 3.5)
Press the Setup tab > Fax Setup.
3
Press down arrow on the right side.
4
Press Fax Forward Settings > Forward to Fax Setting > Receive
5
Forward.
Press Forward and enter a fax number using the keypad on the
6
control panel.
• If you want to set the start time and end time, select Start Time
and End Time.
• If you want the machine to print the report after forwarding a fax,
set the Forward & Print.
Press OK.
7
6.12
<Faxing (Optional)>