Contents
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired or wireless network connection is removed for
more than 60 minutes in "Quick Start Mode".
The front panel LED will turn off during Deep Standby. To "wake" a
HEOS HomeCinema from Deep Standby,
Press the volume or mute buttons.
0
Input audio signal to Optical/Coaxial.
0
CEC (Consumer Electronics Control) command over HDMI/ARC
0
Press the button on your remote controller which you taught HEOS
0
HomeCinema by "Controlling your HEOS HomeCinema".
NOTE
0 It may take around 40 seconds to wake up your HEOS HomeCinema from the
deep standby.
0 You also push the mute button for 3 seconds, the device enters the Deep
Standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
Setup
Use
Troubleshooting
61
Status LED
Appendix