Wall Mounting - Denon HEOS HomeCinema HS2 Owner's Manual

Contents
o Wall-Mounting
The HEOS HomeCinema soundbar can be wall-mounted using the
integrated keyhole mounts. A mounting template can be found in the
product carton. Using a level, position and tape the template to the
wall in the desired location. Install hardware* using the template as a
guide and then remove the mounting template from the wall. Connect
the audio and power cables prior to mounting the soundbar on the
wall.
z Consult a person knowledgeable about your wall type to recommend suitable
hardware for hanging the speaker.
Wall Mounting Keyholes
Setup Use Troubleshooting
NOTE
0 To ensure safety, request a contractor perform the mounting work when mounting
onto a wall.
0 In order to use the unit safely, do not place items on or hang items from the unit.
0 Be sure to fix connection cables to the wall to ensure that cannot be pulled or
tripped over causing the unit to fall. Check that the unit is mounted safely after the
mounting work is complete.
0 Also, periodically check the safety of the unit and whether there is a possibility that
the unit may fall.
0 Denon cannot accept any responsibility for damage, injury or accidents caused by
problems with the mounting location or mounting method.
18
Status LED Appendix