Denon HEOS HomeCinema HS2 Owner's Manual page 54

Contents
Controlling your HEOS HomeCinema
HEOS HomeCinema can be operated using the remote control unit of the
TV.
1
Select "Remote Control".
The setup below is not required when device control by HDMI is
active. (A check mark will be displayed by "HDMI CEC" in this case)
2
Select "IR Control".
3
Select a HEOS HomeCinema command you would like
to control by your remote controller.
Setup Use Troubleshooting
TV Sound Grouping
Set when you want to play TV audio or external input audio from this unit
through a different HEOS device.
1
Select "TV Sound Grouping".
Enable
n
Enables grouping.
Audio Delay
n
Sets the delay for the audio.
NOTE
0 The audio may cut out if the amount of delay is too short. Lengthen the amount of
delay if the audio cuts out.
54
Status LED Appendix