Deep Standby - Denon HOME SOUND BAR 550 Owner's Manual

Contents Connections
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired or wireless network connection is removed for
more than 60 minutes in quick start mode.
The front panel LED will turn off during Deep Standby. To wake this
unit from Deep Standby,
Press any button on the sound bar or the included remote control
0
unit.
Input audio signal to Optical.
0
CEC (Consumer Electronics Control) command over HDMI/ARC
0
Use a TV remote control that has learned the operations of this unit
0
with the remote control learning function to operate this unit.
(v p. 57)
0 It may take around 40 seconds to wake up this unit from the deep standby.
0 You also press the c button on the remote control unit for 5 seconds, the device
enters the deep standby.
0 You also press the 1/3 key for 5 seconds, the device enters the deep standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
Playback Settings
73
Tips Appendix