Digital Manual Setup; Analogue Manual Setup; Analogue Channel List - Samsung DVD-SR270M User Manual

12:00
Tuner Preset
Title List
Auto Preset

Digital Manual Setup

Timer
Digital Channel List
Edit
Digital Favorite Channel
Analog Manual Setup
Disc
Setting
Analog Channel List
Setup
Move Ok Return
> s r e
Manual Scanning
Country : United Kingdom
Channel type : Digital
Scan Mode : All
◄ ►
Channel Number : ◄ CH 5 ►
Frequency : 178750kHz
◄ ►
Bandwidth : 8MHz
◄ ►
Signal status 0%
Start Cancel
12:00
Tuner Preset
Title List Auto Preset
Digital Manual Setup
Timer
Digital Channel List
Edit
Digital Favorite Channel
Disc Analog Manual Setup
Setting
Analog Channel List
Setup
> Move s Ok r Return e
Manual Set
Program 01
Channel ---
AFT On
Tuner Audio NICAM
Station Name ----
> Move s Ok
12:00
Tuner Preset
Title List Auto Preset
Digital Manual Setup
Timer
Digital Channel List
Edit
Digital Favorite Channel
Disc Analog Manual Setup
Setting
Analog Channel List
Setup
> Move s Ok r Return e
Channel List 12:00
Prog. Ch Name
▲
1 --- ----
2 --- ----
3 --- ----
4 --- ----
5 --- ----
6 --- ----
▼
> Move s Swap Cancel r Return
Digital Manual Setup
To tune-in new channels, the DVD Recorder has been provided with the
option Manual Scan where the channel data can be entered by user.
To setup, follow steps
4. Press the ▲▼ buttons to select Digital Manual Setup, then press OK
button.
5. Select the Channel Number which you want to fi nd using ◄►
Exit
buttons.
Select Frequency and input the Frequency of the channel you want to
fi nd by pressing the number button.
Select Bandwidth which you want to fi nd using ◄► buttons.
When the valid frequency is input, the bandwidth is selected
automatically. You can select the value of 6,7 or 8 MHz. After select
option. Press OK button to start the scanning process.

Analogue Manual Setup

To setup, follow steps
4. Press the ▲▼ buttons to select Analogue Manual Setup, then press
OK button.
•
Program :
•
Channel : Tune the channel using ▲▼ buttons.
•
AFT : Fine tunes the channel to obtain a clearer picture.
Exit
is not clear, select "Off " and press the OK button. When the fi ne
tuning bar appears, press the ◄► buttons to obtain a clearer
picture, then press the OK button.
•
Tuner Audio : Sets the channels for the NICAM broadcast.
•
Station Name : Display station name automatically detected in

Analogue Channel List

You can swap or delete the desired channel in the channel list.
To setup, follow steps
4. Press the ▲▼ buttons to select
button.
•
Swap : Select the channel you want to swap by pressing the ▲▼
Exit
buttons, then press the OK button.
Move the channel by press the ▲▼ buttons, then press the
OK button.
•
Delete : Select the channel you want to delete by pressing the ▲▼
buttons, then press the CANCEL button.
English - 27
1~3 on page 26.
1~3 on page 26
Press ▲▼ repeatedly to select the programme position
(01 to 99) for the channel and press the OK button.
Normally, select "NICAM. " If the sound from the
NICAM broadcast is not clear, select "Standard" and
then press the OK button.
broadcasting signal. If not detected, you can edit
name by using ▲▼◄► buttons.
1~3 on page 26.
Analogue Channel
If the picture
List, then press OK