Setting Up The Audio Options - Samsung DVD-SR270M User Manual

Setup
Title List
Tuner Preset
Clock Set
Timer
Video
Edit
Audio
Features
Disc
Setting
Options
Setup
> Move s Ok r Return e
Audio
Title List
Digital Out : On
On
Downmix : Dolby Surround
Off
Timer
Audio DRC : Standard
Edit
Scan Audio : On
Surround : Off
Disc
Setting
AV Audio Input : Stereo
Setup
> Move s Ok r Return e
Digital Out
Title List Dolby Digital : D-PCM
DTS : Off
Timer
MPEG : PCM
Edit
Disc
Setting
Setup
Move Ok Return
> s r e

Setting up the Audio Options

12:00
This function allows you to setup the Audio options.
1.
With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK button.
3. Press the ▲▼ buttons to select Audio, then press the OK button.
4. Press the ▲▼ buttons to select the desired audio option, then press
the OK button.
Exit
5. Press the ▲▼ buttons to select the desired item, then press the OK
button.
M

Press the RETURN button to return to the previous menu.
Press the EXIT (
Digital Out
Selects audio options of signals output from the DIGITAL AUDIO OUT
12:00
(COAXIAL).
•
On : Normally select this.
Press the OK button and select "Dolby Digital, " "DTS, " or "MPEG"
for further settings.
•
Off : The infl uence of the digital circuit upon the analogue circuit is
Exit
minimum.
The following setup items switches the method of outputting audio
12:00
signals when you connect a component such as an amplifi er (receiver)
with a digital input jack.
For connection details, see "AV Receiver Connections"
M

If you connect a component that does not accept the selected
audio signal, a loud noise (or no sound) will come out from the
Exit
speakers, and may aff ect your ears or cause speaker damage.
Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
•
D-PCM : Select this when the recorder is connected to an audio
component that does not have a built in Dolby Digital
decoder.
•
Dolby Digital : Select this when the recorder is connected to an audio
DTS (DVD VIDEOs only)
Selects whether or not to output DTS signals.
•
On : Select this when the recorder is connected to an audio
component with a built-in DTS decoder.
•
Off : Select this when the recorder is connected to an audio
component without a built-in DTS decoder.
MPEG (DVD VIDEOs only)
Selects the type of MPEG audio signal.
•
PCM : Select this when the recorder is connected to an audio
component without a built-in MPEG decoder. If you play MPEG audio
sound tracks, the recorder outputs stereo signals.
•
MPEG : Select this when the recorder is connected to an audio
component with a built-in MPEG decoder.
English - 37
) button to exit the menu.
component with a built-in Dolby Digital decoder.
on page 22.