Connecting & Setting Up; Connecting Dvd Recorder To The; Tv Using The Rf Cable; Connecting The Scart Cable - Samsung DVD-SR270M User Manual

Connecting & Setting Up
Connecting DVD Recorder to the TV
using the RF Cable
M

Make sure that both the television and the DVD
Recorder are switched off before connecting the
cables.
1.
Remove the aerial or network input cable from the
television.
2.
Connect this cable to the 75Ω aerial jack marked
on the rear of your DVD Recorder.
3.
Plug the RF Cable supplied into the
DVD Recorder.
4.
Plug the other end of the RF Cable into the connector
previously used for the aerial on the television.
M

The RF cable connection of this product sends only
signal of TV. You must connect SCART cable or
Audio/Video cables to watch a signal from DVD
Recorder.
TV
ANT
To ANT INPUT

Connecting the SCART Cable

Case 1 : Connecting DVD Recorder to the
TV using the SCART Cable
You can connect your DVD Recorder to the
television using the SCART cable if the appropriate
input is available on the television. You thus:
•
Obtain better quality sound and pictures.
•
Simplify the setting up procedure of your DVD
Recorder.
jack on your
M


1.
Connect the Aerial Cable.
2.
Connect one end of the SCART cable to the AV1 (TV)
jack on the rear of the DVD Recorder.
3.
Plug the other end into the appropriate connector on
the television.
To RF IN
Aerial
To RF OUT
RF Cable
English - 18
Regardless of the type of connection chosen, you
must always connect the RF Cable. Otherwise, no
picture will be visible on the screen when the DVD
Recorder is switched off .
Make sure that both the television and the DVD
Recorder are switched off before connecting the
cables.
TV
ANT
RF Cable
SCART Cable