Recording Immediately - Samsung DVD-SR270M User Manual

DVD
VR SP AV 1
-RW

Recording immediately

Before you start
1.
Make sure antenna cable is connected.
2.
Press the OPEN/CLOSE button and place a recordable disc on the disc
tray.
3.
Check the remaining time on the disc.
DVD-RAM/DVD±RW/+R discs should be formatted or initialised in
advance before beginning recording. Most new discs are sold
unformatted. Make sure to format your unformatted discs before
recording.
4.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
Recording the current programme you are watching
1.
Press the PROG ( / ) buttons or number buttons to select the
station you want to record.
2.
Press the REC MODE button repeatedly, to select the recording Mode
(quality).
➞ HQ ➞ HSP ➞ SP ➞ LSP ➞ ESP ➞ LP ➞ EP ➞ SLP
3. Press the REC button.
Recording from external equipment you are watching
1.
Power on your DVD Recorder and switch to AV mode by pressing the
INPUT SEL. button on the remote control. The front panel display
changes in the following sequence.
➞ PR ➞ AV1 ➞ AV2 ➞ AV3 ➞ DV
2. Press the REC MODE button repeatedly to select the recording Mode
(quality).
➞ HQ ➞ HSP ➞ SP ➞ LSP ➞ ESP ➞ LP ➞ EP ➞ SLP
3. When your DVD Recorder is in the Stop mode, set the operation mode
of your external devices to play mode.
4. Press the REC button on your DVD Recorder when the image from
which you want to start recording is displayed.
To pause recording
Press the PAUSE( ) button to pause a recording in progress.
•
Press the PAUSE( ) button again to resume recording.
English - 56
XCVKL
DVD-SR275M only