Table of Contents
Advertisement
2. DO NOT switch the buffer/polisher on whilst the mop is in contact with the
workpiece.
3. Avoid polishing dissimilar metals with the same buffing mop; galvanic
corrosion may occur.
4. DO NOT touch the workpiece immediately after polishing as it may be hot.
5. DO NOT touch the buffing mop whilst operating or whilst plugged into the
mains power.
6. DO NOT leave the buffer/polisher running unattended.
7. When not in use, switch the buffer/polisher off and unplug from the power
supply.
SAFETY SYMBOLS
SAFETY SYMBOLS & PICTOGRAMS
The following safety symbols are found on the product
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Read the manual
and safety
instructions before
use
Ear protection
should be worn
Hazard;- motor gets
hot
5
Eye protection
should be worn
Dust mask should be
worn
Wear protective
gloves
Advertisement
Table of Contents
