Table of Contents
Advertisement
INTRODUCTION
Thank you for purchasing this CLARKE buffer/polisher.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
TECHNICAL SPECIFICATIONS
Model No
Motor Power
Fuse Rating
Duty cycle classification
Rated Voltage / Frequency
Ingress Protection Rating
No Load Speed
Sound Pressure Level
Guaranteed Sound Power
Uncertainty factor K
Buffing Mop Diameter
Shaft Diameter
Mop width
Dimensions
Weight
ENVIRONMENTAL PROTECTION
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste but according to the laws governing Waste Electrical and
Electronic Equipment (WEEE) at a recognised disposal facility.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
S1 (continuous duty)
670 x 250 x 300 mm
2
CBB250
550W
5 Amp
230V / 50Hz
IP20
2980 rpm
77 dB LpA
90 dB LWA
3
250 mm
20 mm
20 mm
20 kg
Advertisement
Table of Contents
