Sony XAV-AX200 Service Manual page 6

XAV-AX200/AX200C2
Ver. 1.1
9. Unsolder the shortland (SL001) on the MAIN board short-
circuited in step 2, and open the short-circuit.
Note 4: Be sure to open the short-circuit of shortland (SL001).
rear
– Top view –
side
front
side
10. Install the top cover and mechanism deck removed in step 1.
Note 5: The following is an image view. Be sure to refer to "3. DISAS-
SEMBLY" on page 19 for detail.
top cover
mechanism deck
11. Complete the destination setting operation.
1-2. Entering the Destination Code
Note 1: The destination code cannot be inputted by operation of main unit.
Be sure to input the destination code by using the remote com-
mander.
Note 2: The model to which the remote commander have not been sup-
plied can also be operated by using the remote commander.
Note 3: The number buttons on the remote commander cannot be used.
6
Operation method:
1. Press the [ V ] or [ v ] button, and select the alphanumeric char-
acter of "0 to F".
<DESTINATION SETTING MODE>
0 0 0 0 0
EUR:*00000
LA(LA/ET4):*00003
FT(JPN):*00007
Press the [V]
button once.
Press the
<DESTINATION SETTING MODE>
[v] button
1 0 0 0 0 1
once.
EUR:*00000 UC:*00001
LA(LA/ET4):*00003 E17:*00012
FT(JPN):*00007
(Displayed characters/values in the above fi gure are example)
2. The digit advances by pressing the [ b ] button.
The digit returns by pressing the [ B ] button.
<DESTINATION SETTING MODE>
0 0 0 0 0
EUR:*00000
LA(LA/ET4):*00003
FT(JPN):*00007
Press the [b]
button once.
Press the
<DESTINATION SETTING MODE>
[B] button
0 0 0 0 0 1
once.
EUR:*00000 UC:*00001
LA(LA/ET4):*00003 E17:*00012
FT(JPN):*00007
(Displayed characters/values in the above fi gure are example)
3. After inputting the sixth digit, set value is memorized by press-
ing the [ENTER] button, then the unit reboots and returns to
the normal condition.
(Displayed characters/values in the above fi gure are example)
1-3. Destination Code
Model Destination
AEP, UK (EUR)
US, CND (UC)
XAV-AX200 AUS, LA (LA)
E17 (E17)
IND (IN)
XAV-AX200C2 LA (LA)
Note: Refer to "DESTINATION ABBREVIATIONS" on page 4.
1
UC:*00001
E17:*00012
<DESTINATION SETTING MODE>
0 0 0 0 0 1
EUR:*00000 UC:*00001
LA(LA/ET4):*00003 E17:*00012
FT(JPN):*00007
1
UC:*00001
E17:*00012
<DESTINATION SETTING MODE>
0 0 0 0 0 1
EUR:*00000 UC:*00001
LA(LA/ET4):*00003 E17:*00012
FT(JPN):*00007
<DESTINATION SETTING MODE>
0 0 0 0 0 0
EUR:*00000 UC:*00001
LA(LA/ET4):*00003 E17:*00012
FT(JPN):*00007
Destination code
000000
000001
000003
000012
000015
000003
– Continued on next page –
SYS SET