Advertisement

Quick Links

2018/03/30 22:07:14 (GMT+09:00)
SERVICE MANUAL
Ver. 1.0 2018.03
• This model is not equipped with a mechanism deck.
(US, CND)
FOR THE CUSTOMERS IN THE USA. NOT
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Power Output: 20 Watts RMS × 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA (reference: 1 Watt into
4 Ohms)
Monitor section
Display type: Wide LCD color monitor
Dimensions: 6.95 in
System: TFT active matrix
Number of pixels:
1,152,000 pixels (800 × 3 (RGB) × 480)
Color system:
PAL/NTSC/SECAM/PAL-M automatic select for
CAMERA IN terminal
Tuner section
FM
(US, CND)
Tuning range: 87.5 MHz – 107.9 MHz
(E, AUS, IND)
Tuning range:
87.5 MHz – 108.0 MHz (at 50 kHz step)
87.5 MHz – 108.0 MHz (at 100 kHz step)
87.5 MHz – 107.9 MHz (at 200 kHz step)
FM tuning step:
50 kHz/100 kHz/200 kHz switchable
Usable sensitivity: 7 dBf
Signal-to-noise ratio: 70 dB (mono)
Separation at 1 kHz: 45 dB
9-896-505-01
2018C33-1
©
2018.03
AM
(US, CND)
Tuning range: 530 kHz – 1,710 kHz
(E, AUS, IND)
Tuning range:
531 kHz – 1,602 kHz (at 9 kHz step)
530 kHz – 1,710 kHz (at 10 kHz step)
AM tuning step:
9 kHz/10 kHz switchable
Sensitivity: 32 μV
USB player section
Interface:
USB1 port: USB (Hi-speed)
USB2 port: USB (Full-speed)
Maximum current:
USB1 port: 1.5 A
USB2 port: 500 mA
Wireless communication
Communication System:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
(Max. +4 dBm)
Maximum communication range*
Line of sight approx. 10 m (33 ft)
Frequency band:
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*
A2DP (Advanced Audio Distribution Profile) 1.3
AVRCP (Audio Video Remote Control Profile) 1.3
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile) 1.1
Corresponding codec: SBC, AAC
Sony Video & Sound Products Inc.
XAV-AX5000
SPECIFICATIONS
1
:
2
:
US Model
Canadian Model
E Model
Australian Model
*1 The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
antenna (aerial)'s performance, operating system,
software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of
BLUETOOTH communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4 Ω – 8 Ω
Maximum power output: 55 W × 4 (at 4 Ω)
General
Power requirements: 12 V DC car battery
(negative ground (earth))
Rated current consumption: 10 A
Dimensions:
Approx. 178 mm × 100 mm × 139 mm
(7
1
/
in × 4 in × 5
1
/
in) (w/h/d)
8
2
Mounting dimensions:
Approx. 182 mm × 111 mm × 120 mm
(7
1
/
in × 4
3
/
in × 4
3
/
in) (w/h/d)
4
8
4
Mass: Approx. 1.2 kg (2 lb 11 oz) (US, CND)
Mass: Approx. 1.1 kg (2 lb 7 oz) (E, AUS, IND)
Package contents:
Main unit (1)
Parts for installation and connections (1 set)
Remote Commander (1): RM-X170
Microphone (1)
Cable for steering wheel remote input: RC-SR1 (IND only)
Design and specifications are subject to change
without notice.
AV RECEIVER
SYS SET

Advertisement

Table of Contents
loading

Summary of Contents for Sony XAV-AX5000

  • Page 1 PBAP (Phone Book Access Profile) 1.1 50 kHz/100 kHz/200 kHz switchable Corresponding codec: SBC, AAC Usable sensitivity: 7 dBf Signal-to-noise ratio: 70 dB (mono) Separation at 1 kHz: 45 dB AV RECEIVER 9-896-505-01 2018C33-1 Sony Video & Sound Products Inc. © 2018.03 SYS SET...
  • Page 2: Table Of Contents

    Bluetooth SIG, Inc. and any use of 3-3. Front Panel Block ............15 such marks by Sony Corporation is under license. Other 3-4. USB1 Cable, USB2 Cable ..........16 trademarks and trade names are those of their respective owners.
  • Page 3: Servicing Notes

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 1 SERVICING NOTES The SERVICING NOTES contains important information for servicing. Be sure to read this section before repairing the unit. UNLEADED SOLDER ABOUT INSTALLATION OF THIS UNIT FOR WORKING Boards requiring use of unleaded solder are printed with the lead- Due to the structure of the unit, you cannot stably place it on fl...
  • Page 4 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 IMPORTANT NOTE FOR REPLACING THE MAIN BOARD 4. Since various versions, destination code and BD address screen are displayed, refer to “1-2. Entering the Destination When the MAIN board is replaced, be sure to perform the follow- Code” and set the destination code.
  • Page 5 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3. The cursor advances by pressing the [ENTER] button on the 2. Confi rmation After Destination Setting remote commander. Execute the following operation after completing the destination The position of the cursor can not be returned. setting, and confi rm a correct destination was set.
  • Page 6 [HOME] button (Displayed screen in the above fi gure are example) 9. Check that this unit restarts and the logo of “SONY” is dis- played on the screen, then turn the power off. 3. Operate the Apple CarPlay or Android Auto, check that the navigation screen is displayed and the music can play.
  • Page 7 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 • Checking procedure if Apple CarPlay or Android 5. Press the [HOME] button on the main unit, swipe left the touch panel, and touch the [USB2] on the touch panel. Auto cannot be prepared Note: Swipe operation is unnecessary depending on the destination.
  • Page 8 Cancel Reset Touch the [Reset] 11. Check that this unit restarts and the logo of “SONY” is dis- played on the screen, then turn the power off. 12. Remove the USB memory and speaker that is connected to this unit.
  • Page 9: General

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 2 This section is extracted from GENERAL operating instruction. (US, CND) Connection Connection/Installation Subwoofer* Cautions • Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain.
  • Page 10 You may not be able to install this unit in some • If airbags or any other shock-absorbing Speaker connection Japanese cars. In such a case, consult your Sony equipment are in your car, contact the store where dealer. • Before connecting the speakers, turn the unit off.
  • Page 11 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 (E, AUS, IND) Connection Connection/Installation Subwoofer* Cautions • Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain.
  • Page 12 You may not be able to install this unit in some • If airbags or any other shock-absorbing Speaker connection Japanese cars. In such a case, consult your Sony equipment are in your car, contact the store where dealer. • Before connecting the speakers, turn the unit off.
  • Page 13: Disassembly

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW Note: Due to the structure of the device, you cannot stably place it on flat surfaces. Stabilize the device by placing a stand, etc. under it that is suitable for your work.
  • Page 14: Mini Fuse (Blade Type), Cover

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 Note: Follow the disassembly procedure in the numerical order given. 3-2. MINI FUSE (BLADE TYPE), COVER cover left side Note 2: When installing the cover, check chassis that four bosses are all locked. front side 3 Insert a flathead screwdriver Boss is locked.
  • Page 15: Front Panel Block

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-3. FRONT PANEL BLOCK rear side hole 3 plate back top side Note 1: When installing the plate back, align the two bosses and two holes. 2 screw boss (+B, TT, P-TYPE, 2 soft cloth, etc. hole boss...
  • Page 16: Usb1 Cable, Usb2 Cable

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-4. USB1 CABLE, USB2 CABLE 2 USB1 cable connector (CN1701) top side 4 USB1 cable 1 Remove the USB1 cable from the lead pin. 3 screw (PTT2.6 front side 1 Remove the USB2 cable from the lead pin.
  • Page 17: Xm Board (Us, Cnd)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-5. XM BOARD (US, CND) 8 XM board terminal side hole 4 Unlock the hole CN002 5 flexible flat cable (12 core) (CN002) (See Note 2) 7 XM bracket Note 1: When installing the XM 3 filament tape...
  • Page 18: Main Board

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-6. MAIN BOARD Note 1: When the MAIN board is replaced, be sure to refer the “IM- PORTANT NOTE FOR REPLACING THE MAIN BOARD” on page 4, and perform it. 1 screw top side (PTT2.6 2 ground point screw 1 screw (PTT2.6...
  • Page 19: Display Board-1

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-7. DISPLAY BOARD-1 • Continued on 3-8 (page 20). top side front side terminal side 2 Unlock the CN1301. terminal side 4 Unlock the CN1103. 6 Unlock the CN1502. 1 LCD cable connector (CN1302) 3 Draw the LCD FPC out of the connector.
  • Page 20: Display Board-2

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-8. DISPLAY BOARD-2 Note 1: Replaced old DISPLAY board is destroyed with the hammer, Note 2: When the DISPLAY board is replaced, be sure to refer the and throw out it. “IMPORTANT NOTE FOR REPLACING THE DISPLAY BOARD” on page 4, and perform it.
  • Page 21: Bt Antenna

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-9. BT ANTENNA top side 2 total thirteen hooks 3 Move the flexible flat cable (10 core) to the outer side. 1 two screws front side (S1.7 4 Move the touch panel FPC to the outer side. 5 Draw the LCD FPC out of the hole in display chassis .
  • Page 22: 3-10. Liquid Crystal Display, Panel Sub Assy

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 3-10. LIQUID CRYSTAL DISPLAY, PANEL SUB ASSY Note: When the liquid crystal display is replaced, be top side sure to refer the “FLICKER ADJUSTMENT” on 1 Move the flexible flat cable page 23, and perform it. (10 core) to the outer side.
  • Page 23: Electrical Adjustment

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 4 ELECTRICAL ADJUSTMENT MONITOR SECTION If any of the following parts was replaced, execute the “FLICKER ADJUSTMENT” as mentioned below. • MAIN board • DISPLAY board • Liquid crystal display Preparation: • Remote commander (RM-X170) FLICKER ADJUSTMENT Procedure: 1.
  • Page 24: Diagrams

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM - AUDIO Section - INPUT SELECTOR, ELECTRICAL VOLUME AUDIO_L, IC401 (1/2) GUIDANCE, INPUT SELECTOR, AUDIO_L MIC_AUDIO >001B 11 AUDIO_L ELECTRICAL VOLUME IC401 (2/2) (Page 25) GUIDANCE MIXING INPUT SELECTOR 29 INC OUTC...
  • Page 25: Block Diagram - Video Section

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-2. BLOCK DIAGRAM - VIDEO Section - LCD1 MULTIMEDIA INTERFACE DISPLAY CONTROLLER LIQUID CRYSTAL DISPLAY IC1105 (1/2) IC1301 (1/2) USB1 (1/2) SIGNAL VDB0 – VDB7 USB CHARGING CONTROLLER D00 – D05 P010, P011, P081, P013 – P017 DR2 – DR7...
  • Page 26: Block Diagram - Power Supply Section

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-3. BLOCK DIAGRAM - POWER SUPPLY Section - VDD_3.3V SYSTEM CONTROLLER REGULATOR IC801 (2/2) IC300 CN100 (2/2) D300 PULL-UP SWITCH 70 RC_STR_SEL VDD_3.3V 11 VDD (3.3V) VCC1 Q1100, 1101 VCC2 DSP_3.3V 9 DSP (3.3V) J1100 (2/2) 81 RC_IN1...
  • Page 27: Printed Wiring Board - Xm Board (Us, Cnd)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. 5-4. PRINTED WIRING BOARD - XM Board (US, CND) - • : Uses unleaded solder. (In addition to this, the necessary note is printed in each block.) For Printed Wiring Boards.
  • Page 28: Main Board (Component Side)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-6. PRINTED WIRING BOARD - MAIN Board (Component Side) - • : Uses unleaded solder. (US, CND) (Page 27) XM BOARD >02P CN002 MAIN BOARD (COMPONENT SIDE) FFC2 D1100 R1120 D801 D800 C1124 C1125 C212 C235 C305 R2000...
  • Page 29: Printed Wiring Board - Main Board (Conductor Side)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-7. PRINTED WIRING BOARD - MAIN Board (Conductor Side) - • : Uses unleaded solder. MAIN BOARD (CONDUCTOR SIDE) (FRONT VIEW) J1101 CAMERA CN100 J1100 REAR REMOTE FRONT J500 (ANTENNA IN) REAR LCH (+) REAR RCH (+) GRN/BLK REAR LCH (–)
  • Page 30: Schematic Diagram - Main Board (1/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-8. SCHEMATIC DIAGRAM - MAIN Board (1/4) - • See page 39 for Waveforms. • See page 40 for IC Block Diagrams. • See page 44 for IC Pin Function Description. MAIN BOARD (1/4) >002S MAIN BOARD (2/4)
  • Page 31: Schematic Diagram - Main Board (2/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-9. SCHEMATIC DIAGRAM - MAIN Board (2/4) - • See page 39 for Waveforms. • See page 40 for IC Block Diagrams. J1101 J1100 CAMERA REMOTE REAR J500 (ANTENNA IN) FRONT MAIN BOARD (2/4) IC300 FB500 REGULATOR VDR501...
  • Page 32: Schematic Diagram - Main Board (3/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-10. SCHEMATIC DIAGRAM - MAIN Board (3/4) - • See page 40 for IC Block Diagrams. MAIN BOARD (3/4) IC200 POWER AMP IC200 CN100 TCB501HQ(Z) RR_P REAR RCH (+) RL_P REAR LCH (+) RR_N RR– REAR RCH (–) RL_N RL–...
  • Page 33: Schematic Diagram - Main Board (4/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-11. SCHEMATIC DIAGRAM - MAIN Board (4/4) - • See page 39 for Waveforms. • See page 40 for IC Block Diagrams. • See page 44 for IC Pin Function Description. MAIN BOARD (4/4) JL803 >005S MAIN BOARD...
  • Page 34: 5-12. Printed Wiring Board - Display Board

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-12. PRINTED WIRING BOARD - DISPLAY Board - • : Uses unleaded solder. USB1 (Page 28) MAIN BOARD >01P CN1100 DISPLAY BOARD (SIDE A) DISPLAY BOARD (SIDE B) FFC1 CL1136 C1133 R1148 CL1135 R1152 C1111 R1214 R1215 FB1412...
  • Page 35: Schematic Diagram - Display Board (1/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-13. SCHEMATIC DIAGRAM - DISPLAY Board (1/4) - • See page 39 for Waveforms. • See page 44 for IC Pin Function Description. DISPLAY BOARD (1/4) >011S DISPLAY CL1138 BOARD (3/4) (Page 37) C1102 C1126 C1536 C1131 C1132...
  • Page 36: Schematic Diagram - Display Board (2/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-14. SCHEMATIC DIAGRAM - DISPLAY Board (2/4) - • See page 44 for IC Pin Function Description. DISPLAY BOARD (2/4) VDO1.5V VDO3.3V >015S AVDD9.2V DISPLAY VGL-6V BOARD VGH18V (4/4) VCOM.REF (Page 38) L1306 10uH R1542 R1543 L1309 L1310...
  • Page 37: Schematic Diagram - Display Board (3/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-15. SCHEMATIC DIAGRAM - DISPLAY Board (3/4) - • See page 40 for IC Block Diagrams. • See page 44 for IC Pin Function Description. DISPLAY BOARD (3/4) >017S TCH3.3V TCH_GND DISPLAY BOARD (4/4) (Page 38) R1523 R1522...
  • Page 38: Schematic Diagram - Display Board (4/4)

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 5-16. SCHEMATIC DIAGRAM - DISPLAY Board (4/4) - • See page 39 for Waveforms. • See page 40 for IC Block Diagrams. DISPLAY BOARD (4/4) CL1714 GAMMA10V BUS1 VBUS_5V >016S LCD_5V >012S DISPLAY VBUS_GND DAC3.3V BOARD AGND SOC3.3V...
  • Page 39 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 • Waveforms – MAIN Board – – DISPLAY Board – IC700 ug (XOUT) IC1105 8 (XO) 2.4 Vp-p 3.6 Vp-p 83 ns 41.8 ns 1 V/DIV, 50 ns/DIV 1 V/DIV, 20 ns/DIV IC500 es (XTAL_IN) IC1105 oj (P070) 90 mVp-p 4.3 Vp-p...
  • Page 40 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 • IC Block Diagrams – MAIN Board – IC200 TCB501HQ (Z) OFFSET H-SW 10 11 12 13 14 23 24 IC300 LV56851UV-XH ALL OUTPUT OFF EXCEPT VDD ALL OUTPUT OFF VREF VREG 5.1V UVDET OVDET VREF 1.25V BDET...
  • Page 41 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 IC500 SDP2014HN/V102 32 31 27 26 VDDA_IFADC 1 DIGITAL CONTROL DIGITAL XTAL VSSA_IFADC 2 OSCILLATION TUNING OSCILLATION SYSTEM VBGP 3 DIVIDERS FM_CAP 4 IC CONTROL UNIT FM_IN_M 5 FRONT-END FM_IN_P 6 POWER RADIO AUDIO STEREO D/A VDDA_RF 7...
  • Page 42 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 – DISPLAY Board – IC1106 PCM1808PWR IC1701 NJM2884U1-33 (TE2) ANTIALIAS VINR LOW-PASS FILTER ANTIALIAS VINL LOW-PASS FILTER THERMAL PROTECTION BANDGAP DELTA-SIGMA REFERENCE MODULATOR 1/64 SERIAL DECIMATION INTERFACE FILTER VREF 1 REFERENCE & WITH MODE/FORMAT DOUT HIGH-PASS CONTROL DELTA-SIGMA...
  • Page 43 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 IC1709 TPS2543RTER DISABLE + UVLO + DISCHARGE CURRENT SENSE OTSD THERMAL SENSE CURRENT LIMIT CURRENT CHARGE 8-MS DEGLITCH SELECT LIMIT PUMP (FALLING EDGE) 8-MS DEGLITCH UVLO DRIVER DM_OUT 2 DM_IN DP_OUT 3 DP_IN DIVIDER DETECTION DETECTION MODE AUTO-...
  • Page 44 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 • IC Pin Function Description MAIN BOARD IC700 LC786823E-6E18-3H (AUDIO DSP) Pin No. Pin Name Description Not used AVDD1 Power supply terminal (+3.3V) (for analog system) AVSS1 Ground terminal (for analog system) External capacitor connection terminal for audio D/A converter and electrical volume reference...
  • Page 45 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 Pin No. Pin Name Description LACK L/R sampling clock signal input terminal Not used Bit clock signal input terminal Not used DATA Audio data input terminal Not used MCLK Master clock signal input terminal Not used USB_IN USB device detection signal output to the system controller “L”: USB device is connected...
  • Page 46 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN BOARD IC801 LC88FC3K0AUTJ-2H (SYSTEM CONTROLLER) Pin No. Pin Name Description 1 to 3 Not used FLASH_RW Flash writing terminal Not used RESET System reset signal input from the regulator “L”: reset SUB_X1 Low-speed clock input terminal (32.768 kHz) SUB_X2 Low-speed clock output terminal (32.768 kHz)
  • Page 47 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 Pin No. Pin Name Description KEY_ACK0 Key acknowledge signal (wake up signal) input terminal Not used KEY_ACK1 Key acknowledge signal (wake up signal) input from the KEY board SIRCS Remote control signal input from the KEY board Not used...
  • Page 48 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY BOARD IC1105 TMM9200_B (MULTIMEDIA INTERFACE) Pin No. Pin Name Description BOOT1 Not used NRESET Reset signal input from the system controller “L”: reset PLL0VDD12_0 Power supply terminal (+1.3V) PLL1VDD12_0 Power supply terminal (+1.3V) PLL2VDD12_0 Power supply terminal (+1.3V) VDDP4 Power supply terminal (+3.3V)
  • Page 49 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 Pin No. Pin Name Description P052 Not used P054 Connection terminal for system controller P055 PWM signal output to the DC/DC converter P050 Interrupt signal input from the touch panel controller 93, 94 P051, P053 Not used P076 Chip select signal output to the serial fl...
  • Page 50 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 Pin No. Pin Name Description P065 Not used P057 Digital video clock signal output to the display controller VDDP3_0 Power supply terminal (+3.3V) USB11_DP, 172, 173 Connection terminal for debug connector USB11_DN P080 Not used P081 Digital RGB video signal (red) output to the display controller...
  • Page 51 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY BOARD IC1301 ML86241LAZA7FL (DISPLAY CONTROLLER) Pin No. Pin Name Description DGND Ground terminal (for digital system) A2, A3 VDA19, VDA22 Digital video signal input terminal Not used VCLKA Digital video clock signal input terminal Not used VCLKB...
  • Page 52 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 Pin No. Pin Name Description G11, G12 DB7, DB6 Digital RGB video signal (blue) output to the liquid crystal display XOSCI System clock input terminal (25 MHz) XOSCO System clock output terminal (25 MHz) PTSEL Output data selection signal input terminal...
  • Page 53 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY BOARD IC1501 ATMXT449T-AT (TOUCH PANEL CONTROLLER) Pin No. Pin Name Description Not used VDDIO Power supply terminal (+3.3V) (for digital IO interface) 3, 4 EXTCPA0, EXTCPA1 External capacitor connection terminal Ground terminal RESET Reset signal input from the multimedia interface “L”: reset...
  • Page 54: Exploded Views

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 6 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference they may have some difference from the number in the exploded views are not sup- original one. plied.
  • Page 55: Main Board Section

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 6-2. MAIN BOARD SECTION USB1 USB2 (US, CND) (US, CND) FFC2 not supplied MAIN board Note: When the complete MAIN board (Ref. No. 51) is replaced, be sure to refer the “IMPORTANT NOTE FOR REPLACING THE MAIN BOARD” on page 4, and perform it.
  • Page 56: Front Panel Section

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 6-3. FRONT PANEL SECTION top side front side LCD1 bottom side FFC1 not supplied rear side Note 1: Replaced old complete DISPLAY board (Ref. No. 102) is de- Note 3: When the liquid crystal display (Ref. No. LCD1) is replaced, stroyed with the hammer, and throw out it.
  • Page 57: Electrical Parts List

    2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 SECTION 7 DISPLAY ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- uF: μF the parts list may be different from the ber, please include the board name. parts specifi ed in the diagrams or the com- •...
  • Page 58 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1325 1-118-386-11 CERAMIC CHIP 0.1uF * C1517 1-116-714-11 CERAMIC CHIP 22uF 6.3V * C1326 1-116-720-11 CERAMIC CHIP 10uF 6.3V C1532 1-118-386-11 CERAMIC CHIP 0.1uF * C1327...
  • Page 59 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1751 1-118-386-11 CERAMIC CHIP 0.1uF L1301 1-481-099-21 INDUCTOR C1752 1-118-391-11 CERAMIC CHIP 0.01uF L1302 1-481-099-21 INDUCTOR C1753 1-164-940-11 CERAMIC CHIP 0.0033uF L1303 1-481-099-21 INDUCTOR C1754...
  • Page 60 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1151 1-218-933-11 METAL CHIP 1/16W R1326 1-218-990-81 SHORT CHIP R1152 1-218-990-81 SHORT CHIP R1327 1-218-990-81 SHORT CHIP R1153 1-218-990-81 SHORT CHIP R1328 1-218-990-81 SHORT CHIP...
  • Page 61 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1518 1-218-965-11 METAL CHIP 1/16W * R1765 1-250-503-11 METAL CHIP 2.2K 1/16W R1519 1-218-965-11 METAL CHIP 1/16W R1766 1-250-632-11 METAL CHIP 4.7K 1/10W R1521 1-218-990-81...
  • Page 62 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-2198-996-A MAIN BOARD, COMPLETE (US, CND) (See Note) C305 1-116-742-11 CERAMIC CHIP 0.22uF A-2198-997-A MAIN BOARD, COMPLETE (E, AUS, IND) * C306 1-120-086-11 ELECT CHIP...
  • Page 63 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C613 1-118-386-11 CERAMIC CHIP 0.1uF C821 1-164-842-11 CERAMIC CHIP 2PF 0.25PF 50V C614 1-118-462-11 CERAMIC CHIP 1uF C824 1-162-923-11 CERAMIC CHIP 47PF C615 1-116-732-11 CERAMIC CHIP 2.2uF 6.3V...
  • Page 64 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D106 6-503-238-01 DIODE GN1G J600 1-821-559-11 CONNECTOR, COAXIAL (SMT TYPE) D107 6-503-238-01 DIODE GN1G J1100 1-844-655-21 JACK (MIC, REMOTE) J1101 1-844-870-11 JACK, PIN 6P (FRONT, REAR, SUB, CAMERA)
  • Page 65 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R105 1-216-296-11 SHORT CHIP R629 1-218-941-81 METAL CHIP 1/16W R106 1-218-977-11 METAL CHIP 100K 1/16W R630 1-218-941-81 METAL CHIP 1/16W R107 1-218-953-11 METAL CHIP 1/16W...
  • Page 66 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R845 1-218-941-81 METAL CHIP 1/16W R1136 1-218-990-81 SHORT CHIP R846 1-218-941-81 METAL CHIP 1/16W R1137 1-218-990-81 SHORT CHIP R847 1-218-941-81 METAL CHIP 1/16W R1138 1-218-990-81...
  • Page 67 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2017 1-218-990-81 SHORT CHIP ACCESSORIES R2018 1-218-990-81 SHORT CHIP ************ R2019 1-218-990-81 SHORT CHIP 4-732-062-12 OPERATING INSTRUCTION < DIODE > (ENGLISH, FRENCH, SPANISH) (US, CND)
  • Page 68 2018/03/30 22:07:14 (GMT+09:00) XAV-AX5000 REVISION HISTORY Ver. Date Description of Revision 2018.03 How to search for a contact point of signal lines or the like in DIAGRAMS SECTION If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use the PDF fi...

Table of Contents