Electrical Parts List - Sony XAV-AX200 Service Manual

XAV-AX200/AX200C2
Ver. 1.1
MAIN SERVO
SXM TFT TUNER
Note:
• Due to standardization, replacements in
the parts list may be different from the
parts specifi ed in the diagrams or the com-
ponents used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked "*" are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL: Metal-fi lm resistor.
METAL OXIDE: Metal oxide-fi lm resistor.
F: nonfl ammable
Ref. No. Part No. Description
A-2195-646-A MAIN BOARD, COMPLETE (Including SXM board,
A-2195-647-A MAIN BOARD, COMPLETE (Including TUNER
board, Cable) (AX200: AEP, UK, E17, AUS, LA)
A-2219-880-A MAIN BOARD, COMPLETE (Including TUNER
A-2223-454-A MAIN BOARD, COMPLETE (Including TUNER
********************
7-621-775-78 SCREW +B 2.6X14
< MOTOR >
FAN1 9-885-220-43 FAN
< IC >
U310 9-885-220-44 IC STM8S207RB (ST) (AX200: US, CND, AEP,
U310 9-885-223-69 IC STM8S207CBT (ST07) (AX200: IND/AX200C2)
*************************************************************
SERVO BOARD (Included in DVD deck assy
************
*************************************************************
SXM BOARD (Included in complete MAIN board)
**********
*************************************************************
A-2195-652-A TFT BOARD, COMPLETE (Including Heat radiation
sheet, Shield cover) (AX200: US, CND, AEP, UK,
A-2219-882-A TFT BOARD, COMPLETE (Including Heat radiation
sheet, Shield cover) (AX200: IND) (See Note 3, 4)
A-2223-455-A TFT BOARD, COMPLETE (Including Heat radiation
sheet, Shield cover) (AX200C2) (See Note 3, 4)
*******************
4-728-478-01 LIGHT GUIDE
< ROTARY ENCODER >
EN1 9-885-220-53 ROTARY ENCODER (OPTION,
*************************************************************
60
SECTION 7

ELECTRICAL PARTS LIST

• CAPACITORS
uF: μF
• COILS
uH: μH
• SEMICONDUCTORS
In each case, u: μ, for example:
: μA. . , uPA. . , μPA. . ,
uA. .
uPB. . : μPB. . , uPC. . , μPC. . ,
uPD. . : μPD. .
Among mounted electrical parts on each
board, only parts that are described in the
electrical parts list can be replaced for re-
pairing.
The parts that are not described in the
electrical parts list cannot be replaced with
single for repairing.
Remark
TUNER board, Cable) (AX200: US, CND)
(See Note 1)
(See Note 1)
board, Cable) (AX200: IND) (See Note 1)
board, Cable) (AX200C2) (See Note 1)
UK, E17, AUS, LA) (See Note 2)
(See Note 2)
(DL-C35D2) (Ref. No. DVM1))
(AX200: US, CND)
E17, AUS, LA) (See Note 3, 4)
VOICE)
When indicating parts by reference num-
ber, please include the board name.
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
Ref. No. Part No. Description
TUNER BOARD (Included in complete MAIN board)
************
*************************************************************
MISCELLANEOUS
**************
BT1 9-885-220-45 BT ANTENNA
0 DVM1 A-2195-649-A DVD DECK ASSY (DL-C35D2)
F1 9-885-192-49 MINI FUSE (BLADE TYPE) (10 A/32 V)
FFC1 9-885-220-48 FFC (60 PIN)
FFC2 9-885-220-47 FFC (20 PIN)
FFC3 9-885-220-46 FFC (35 PIN)
LCD1 9-885-220-54 TFT (6.4) (See Note 5)
PW1 1-846-035-11 CONNECTION CABLE (ISO)
(Power supply connection cable) (AX200: AEP, UK)
PW1 1-846-039-11 CONNECTION CABLE, AUTOMOBILE
(AX200: US, CND, E17, AUS, LA, IND/AX200C2)
TPN1 9-885-214-49 TOUCH PANEL (See Note 6)
USB1 9-885-214-55 USB (CABLE) (
*************************************************************
Note 1: When the complete MAIN board is replaced, be sure to refer the
following, and perform them.
• DESTINATION SETTING METHOD (page 5)
• COMMUNICATION CHECK OF Apple CarPlay AND An-
droid Auto (page 7)
• FLICKER ADJUSTMENT (page 25)
Note 2: When the U310 on the MAIN board is replaced, be sure to re-
fer the "DESTINATION SETTING METHOD" on page 5, and
perform it.
Note 3: When the complete TFT board is replaced, be sure to refer the
following, and perform them.
• COMMUNICATION CHECK OF Apple CarPlay OR An-
droid Auto (page 7)
• FLICKER ADJUSTMENT (page 25)
Note 4: Replaced old complete TFT board is destroyed with the ham-
mer, and throw out it.
Note 5: When the TFT (6.4) (Ref. No. LCD1) is replaced, refer to
"FLICKER ADJUSTMENT" on page 25.
Note 6: When the touch panel (Ref. No. TPN1) is replaced, refer to
"TOUCH PANEL ADJUST" on page 9.
Remark
(Including SERVO board, Bracket)
(Power supply connection cable)
)
– Continued on next page –
SYS SET