Disassembly; Disassembly Flow; Mini Fuse (Blade Type), Top Cover - Sony XAV-AX200 Service Manual

• This set can be disassembled in the order shown below.
3-1.

DISASSEMBLY FLOW

SET

3-2. MINI FUSE (BLADE TYPE), TOP COVER

(Page 19)
3-3. DVD DECK ASSY
(Page 20)
3-4. USB CABLE
(Page 20)
3-5. FRONT PANEL BLOCK, CHASSIS BLOCK
(Page 21)
3-6. MAIN BOARD
(Page 22)
Note: Follow the disassembly procedure in the numerical order given.
3-2. MINI FUSE (BLADE TYPE), TOP COVER
2 screw
(PTT2.6 5)
SECTION 3

DISASSEMBLY

3-7. BT-ANT COVER,
PANEL BRACKET
(Page 22)
3-10. TFT BOARD
(Page 24)
3-11. BT ANTENNA, TFT (6.4), TOUCH PANEL
(Page 25)
3 boss
4 four claws
1 mini fuse
(blade type)
2 screw
(PTT2.6 5)
Note: Due to the structure of the unit, you cannot stably
place it on flat surfaces.
Stabilize the unit by placing a stand, etc. under it
that is suitable for your work.
3-8. KNOB ASSY
(Page 23)
3-12. SERVICE POSITION
5 top cover
3 boss
XAV-AX200/AX200C2
stand, etc.
3-9. DISC GUIDE ASSY
(Page 23)
(Page 25)
Note: When installing the top cover,
check that two bosses are all
locked.
OK
Tightly locked.
– Side view –
NG
Not locked.
– Side view –
19
SYS SET