Roof Integration, High Roof Tiles (Convex - Concave Tiles); Standard Delivery; Standard Dimensions - Wolf CFK-1 Installation, Operating And Maintenance Instructions

Standard delivery

Installation parts
Left hand
cover panel
Flashing tape
base, L.h.
Flashing tape
Standard dimensions for
determining the position of
the collector array
Collector array width
Width with flashing pieces /
lift plates
Number of collectors
Width of the collector array [m]
Width with cover frame [m]
30
15. Roof integration, high roof tiles
(convex - concave tiles)
For safety reasons, the [German] roofing contractor's association specifies a covered
NB
substrate with bitumen sheeting, reinforced foil or other suitable material below the
collector area to prevent the ingress of moisture into the building in case of leaks. This
sub-roof must terminate in the roof gutter.
Top mounting rail
Intermediate
panels
Connecting rail
Bottom mounting rail
Triangular sealing tape
2 3
2.36 3.49
2.73 3.86
Edge
protector
Timber spacer of 15 to 30 mm
height to match to the battens
Collector array width
Width with cover frame
Align
4 5 6
4.62 5.75 6.88
4.99 6.12 7.25
Top cover panels
Right hand
cover panel
Flashing tape base, R.h.
Screws, nuts, grub screws,
woodscrews in a bag
7 8 9
8.01 9.14 10.27
8.38 9.51 10.64
3062815_0110
10 *)
11.40
11.77