Rack Mounting Instructions; Identifying The Sections Of The Rack Rails - Supero SC847J SAS2 Series User Manual

SC847J SAS2 Chassis Manual
5-5

Rack Mounting Instructions

This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using. NOTE: This rail will fit a rack between 26.5" and 36.4" deep.

Identifying the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: An inner chassis rail which secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
from the outer rail. These assemblies are specifically designed for the left and right
side of the chassis.
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
Outward
Figure 5-1: Identifying the Outer Rail, Middle Rail and Inner Rails
Outer Rail
(Left Rail Assembly Shown)
5-4
Middle Rail
Locking Tab
Inner Rail