Rack Mounting Instructions - Supero SC812L Series User Manual

SC812L Chassis Manual
5-4

Rack Mounting Instructions

This section provides information on installing the SC812L chassis into a rack unit
with the rails provided. There are a variety of rack units on the market, which may
mean the assembly procedure will differ slightly. You should also refer to the instal-
lation instructions that came with the rack unit you are using.
NOTE: The rails will fi t a rack between 29" and 35.25" deep.
Identifying the Sections of the Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly
to the server chassis and an outer rack rail that secures directly to the rack itself.
Rail Brackets
The chassis package includes four rail brackets and two chassis mounts. The rail
brackets have long ovals used to adjust the length of the rails when mounting. The
chassis mounts (both short) have one square hole.
5-4