Advertisement

Bissell SPOTCLEAN PRO 3624, 2458 Series Manual

Product Overview

Product Overview

  1. Power Switch
  2. Power Cord
  3. Quick Release™ Cord Wrap
  4. Dirty Tank
  5. Dirty Tank Handle
  6. Clean Tank Carry Handle
  7. Clean Tank
  8. Hose Grip
  9. Spray Trigger
  10. Hose Secure Latch
  11. Flex Hose

Go online for a comprehensive walkthrough of your new purchase!

This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you'll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the following:

warningburn hazardshock hazardWARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
» Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.
» Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
» Do not expose to rain. Store indoors.
» Do not allow to be used as a toy. Close attention is necessary when used by or near children.
» Do not use for any purpose other than described in this user guide. Use only manufacturer's recommended attachments.
» Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
» Always install float before any wet pick-up operation.
» Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
» Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
» Do not handle plug or appliance with wet hands.
» Keep appliance on a level surface.
» Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
» Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
» Turn OFF all controls before plugging or unplugging appliance.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosine, etc.) or use in areas where they may be present.
» Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
» Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
» Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
» Use only BISSELL® cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formula section of this guide.
» Do not carry the appliance while in use.
» Do not immerse. Use only on surfaces moistened by the cleaning process.
» Plastic film can be dangerous. To avoid danger of suffocation, keep away from children.

SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER'S WARRANTY.


Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren't sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet with the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

GROUNDING INSTRUCTIONS

Troubleshooting

Below are some of the issues you may run into. If you don't see the issue you're experiencing below, visit support.BISSELL.com.

Problem Possible Cause Remedies


Reduced/no spray

Clean Water Tank may be empty. Refill tank.
Clean Water Tank may not be completely seated. Turn power OFF. Remove and reseat tank.
Pump may have lost prime. Hold end of hose below water level in tank to prime.

Loss of suction power

Tanks may not be completely seated. Turn power OFF. Remove and reseat both tanks.
Dirty Water Tank is full. Empty tank.

What's in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the "Carton Contents" list located on the carton top flap.

Body
Body

Tools (vary by model)
Tools (vary by model)

Sample Formulas (vary by model)
Sample Formulas (vary by model)

Filling the Formula Tank

Find more formulas at BISSELL.com.

Choosing Your Desired Formula

Always use genuine BISSELL® formulas in your machine. Other formulas may harm the machine and void the warranty.

Clean + Protect
Removes deep down dirt
Clean + Protect

PET Stain & Odor
Removes tough pet messes
PET Stain & Odor

PRO MAX Clean + Protect
Our most powerful formula for tough, ground-in dirt & stains
PRO MAX Clean + Protect

PET PRO OXY Urine Eliminator
Our best formula for tough pet messes
PET PRO OXY Urine Eliminator

*2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula.

Filling the Tank

  1. Remove tank from the back of the machine by lifting the Clean Tank Carry Handle.
    Filling the Tank Step 1
  2. Unscrew the black cap and remove bottle insert.
    Filling the Tank Step 2
  3. Fill tank with hot tap water (140°F/60°C MAX) to the water fill line.
    Filling the Tank Step 3
  4. Add 60 mL/2oz of BISSELL formula to the tank.
    Filling the Tank Step 4
  5. Place bottle insert back into tank and tighten the black cap.
    Filling the Tank Step 5
  6. Place the tank back onto the machine.
    Filling the Tank Step 6

Using Your Machine

To purchase additional tools or formulas, visit support. BISSELL.com.

Before You Clean

  1. Vacuum to remove loose dirt from area to be cleaned.
  2. Spray any BISSELL® stain pretreat formula to soiled areas or stains.
  3. Allow to sit for at least 3 minutes.
  4. Clean following instructions below.

Choose Your Desired Tool

Tools vary by model.

3
3" and 4" Tools
Great for carpet stains, furniture and other hard-to-reach surfaces.

6
6" Tool
Great for cleaning stairs and larger furniture areas.

Crevice Tool
Crevice Tool
Best for narrow spaces and crevices that are hard to reach.

Deep Stain/Pet Stain Tool
Deep Stain/Pet Stain Tool
Deep injection technology cleans the carpet from the bottom up to quickly and thoroughly remove stains.

Stain Trapper Tool
Stain Trapper Tool
Messes are collected and stored in a separate, removable container, keeping pet and other liquid messes out of your machine.

Attaching and Using the Tool

  1. Release the hose by twisting the secure latch.
    Attaching and Using the Tool Step 1
  2. Attach your desired tool to the Hose Grip until you hear a "click".
    Attaching and Using the Tool Step 2
  3. Twist the Quick Release™ Cord Wrap and unwind the cord to plug into outlet.
    Attaching and Using the Tool Step 3
  4. Press the Power Button ON.
    Attaching and Using the Tool Step 4
  5. Point the tool approximately 1 inch above the spot or stain and press the Spray Trigger.
    Attaching and Using the Tool Step 5
  6. Release the Spray Trigger and use the bristles to scrub the area. To lift away the stain, apply downward pressure while moving the tool slowly toward you.
    Attaching and Using the Tool Step 6

Deep Stain/Pet Stain Tool NOTE: When using the Deep Stain Tool, always keep the tool in direct contact with carpeting to avoid over-spraying.

Emptying the Stain Trapper Tool (select models only)

  1. To empty the tool, rotate the small tank on the bottom to unlock it.
    Emptying the Stain Trapper Tool Step 1
  2. Dump dirty water into a sink or toilet and rinse the tank out with clean water.
    Emptying the Stain Trapper Tool Step 2
  3. Replace the tank by lining up the locking teeth with their mating slots (make sure the two teeth that are closest together are pointed toward the brush). Turn the tank to lock it into place.
    Emptying the Stain Trapper Tool Step 3

Emptying the Dirty Water Tank

We have additional tips for maintaining your machine at support. BISSELL.com.

  1. When the Dirty Water Tank reaches the "FULL" line it is time to empty.
    Emptying the Dirty Water Tank Step 1
  2. Remove Dirty Water Tank and carry to disposal area.
    Emptying the Dirty Water Tank Step 2
  3. Unlock by rotating the handle up and over the back of the tank.
    Emptying the Dirty Water Tank Step 3
  4. Remove lid and pour out dirty water. Rinse out tank to remove any debris.
    Emptying the Dirty Water Tank Step 4Emptying the Dirty Water Tank Step 5
  5. Replace the tank lid and rotate the handle forward to lock back into place.
    Emptying the Dirty Water Tank Step 6
  6. Before placing tank back into the machine, remove any debris from the red filter.
    Emptying the Dirty Water Tank Step 7


To reduce the risk of fire, electric shock or injury, turn power OFF before performing maintenance of troubleshooting.


When using the Deep Stain Tool, always keep the tool in direct contact with carpeting to avoid over-spraying. Keep spray away from face. Failure to do so may result in personal injury.

Cleaning & Storing Your Machine

For more helpful maintenance tips, check out support. BISSELL.com.

  1. Remove and rinse the tools under clean, running water. Allow tools to dry.
    Cleaning & Storing Your Machine Step 1
  2. It is recommended that you suction clean water from a bowl (or bucket) to rinse out the hose. Lift end of hose and stretch out to ensure all water is cleared.
    Cleaning & Storing Your Machine Step 2
  3. Wrap and secure the Flex Hose and Power Cord.
    Cleaning & Storing Your Machine Step 3Cleaning & Storing Your Machine Step 4


To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal components may result.

Warranty

2-Year limited warranty, may vary by state. Visit support. BISSELL.com or call 1-800-237-7691 for complete warranty information.

But wait, there's more!

Join us online for a complete guide to your new product, including troubleshooting, product registration, parts, and more. Go to support.BISSELL.com.


REGISTER

INFO

VIDEOS

PARTS

SUPPORT
Brand

©2019 BISSELL Inc. All rights reserved.
Printed in China. Part Number 1622493 12/19 RevA

Videos

Bissell 3624 SpotClean Pro - Unboxing & Review Video

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Bissell SPOTCLEAN PRO 3624, 2458 Series Manual

Advertisement

Need Assistance?

Do you have a question about the SPOTCLEAN PRO 3624 Series that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents