Table of Contents
Advertisement
Cleaning Area Rugs
Regularly clean your high-traffic area rugs in Express Clean Mode:
• Check the manufacturer's tag.
• Select Express Clean Mode.
• When cleaning area rugs, place the rug on
a sealed surface to test for colorfastness in
an inconspicuous area. Your cleaner should
not be used on unsealed surfaces.
IMPORTANT: Please check manufacturer's tag before cleaning area rugs for any
specialized cleaning instructions. We do not recommend deep cleaning delicate, silk,
wool, antique, or area rugs without a manufacturer's tag.
Emptying the Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
1
To release Dirty Water
Tank, press the colored
tank handle down and
tilt the tank towards you.
Pull the tank up and off
the machine.
3
Clean the red filter
below the tank
by wiping off any
remaining dirt or
debris.
12
www.BISSELL.com
2
For quick empty:
Pull the Rubber Tab
and tilt to pour.
When closing the
Rubber Tab, make
sure all edges are
sealed tight.
4
To return the tank:
Angle the tank and insert
bottom first. Then tilt the
tank toward the machine
and push the top in until
it clicks into place.
• Important: Keep the Foot of the deep
cleaner perpendicular to the rug's edge with
each cleaning pass to prevent damage.
• Recommended Cleaning Pace: 12 inches per
second
For final clean and rinse: Unscrew
the ring at the bottom of the tank.
Gently remove and clean the Float
Stack. Return the Float Stack by
lining up the arrows so it fits into the
tank and locks into place. Return the
ring so it twists and locks into place,
this keeps water from leaking.
Did You Know?
The Float Stack is what
prevents your dirty tank
from overflowing.
Advertisement
Table of Contents
