Dodge DURANGO 2021 Owner's Manual page 92

90 GETTING TO KNOW YOUR INSTRUMENT PANEL
The system allows the driver to select
information by pushing the following buttons
mounted on the steering wheel:
Instrument Cluster Display Control Buttons
Up Arrow Button

Push and release the up
scroll upward through the main menu.
Down Arrow Button

Push and release the down
to scroll downward through the main menu.
Right Arrow Button

Push and release the right
access the information screens or submenu
screens of a main menu item.
Left Arrow Button

Push the left
main menu from an info screen or submenu
item.
OK Button

Push the OK button to access/select the infor-
mation screens or submenu screens of a main
menu item. Push and hold the OK button for
one second to reset displayed/selected
features that can be reset.
The instrument cluster display is located in the
center portion of the cluster and consist of
multiple sections:
Main Screen — The inner ring of the display

will illuminate in gray under normal condi-
arrow button to
tions, yellow for non critical warnings, red for
critical warnings, and white for on demand
information.
arrow button
Submenu Dots — Whenever there are

submenus available, the position within the
submenus is shown here.
Reconfigurable Telltales/Information

arrow button to
Gear Selector Status (PRND)

arrow button to return to the
Driver Interactive Display (Compass, Temp,

Range to Empty, Trip A, Trip B, Average Fuel
Economy, Current Fuel Economy, Time,
Trailer Trip and Gain)
All Wheel Drive (AWD) Status — If Equipped

The instrument cluster display will normally
display the main menu or the screens of a
selected feature of the main menu. The main
display area also displays "pop up" messages
that consist of approximately 60 possible
warning or information messages. These pop up
messages fall into several categories:
Five Second Stored Messages

When the appropriate conditions occur, this
type of message takes control of the main
display area for five seconds and then returns
to the previous screen. Most of the messages
of this type are then stored (as long as the
condition that activated it remains active) and
can be reviewed from the "Messages" main
menu item. Examples of this message type are
"Right Front Turn Signal Lamp Out" and "Low
Tire Pressure."