Dodge DURANGO 2021 Owner's Manual page 135

The ACC screen may display once again if any of
the following ACC activity occurs:
System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning

The instrument cluster display will return to the
last display selected after five seconds of no
ACC display activity.
Activating Adaptive Cruise Control (ACC)
The minimum set speed for the ACC system is
20 mph (32 km/h).
When the system is turned on and in the ready
state, the instrument cluster display will read
"ACC Ready."
When the system is off, the instrument cluster
display will read "Adaptive Cruise Control (ACC)
Off."
NOTE:
You cannot engage ACC under the following
conditions:
When in 4WD Low

When the brakes are applied

When the parking brake is applied

When the automatic transmission is in PARK,

REVERSE or NEUTRAL
When the vehicle speed is below the

minimum speed range
When the brakes are overheated

When the driver's door is open at low speeds

When the driver's seat belt is unbuckled at

low speeds
When there is a stationary vehicle in front of

your vehicle in close proximity
To Activate/Deactivate
Push and release the Adaptive Cruise Control
(ACC) on/off button. The ACC menu in the
instrument cluster displays "ACC Ready."
STARTING AND OPERATING
To turn the system off, push and release the
Adaptive Cruise Control (ACC) on/off button
again. At this time, the system will turn off and
the instrument cluster displays "Adaptive Cruise
Control (ACC) Off."
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous.
You could accidentally set the system or
cause it to go faster than you want. You could
lose control and have a collision. Always leave
the system off when you are not using it.
To Set A Desired Speed
When the vehicle reaches the speed desired,
push the SET (+) button or the SET (-) button
and release. The instrument cluster display will
show the set speed.
133
4