Dodge DURANGO 2021 Owner's Manual
Hide thumbs Also See for DURANGO 2021:
Table of Contents

Advertisement

Quick Links

2021 DODGE DURANGO
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Dodge DURANGO 2021

  • Page 1 2021 DODGE DURANGO OWNER’S MANUAL...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................7 GETTING TO KNOW YOUR VEHICLE ..................13 GETTING TO KNOW YOUR INSTRUMENT PANEL ............87 STARTING AND OPERATING ....................108 MULTIMEDIA ..........................174 SAFETY ............................207 IN CASE OF EMERGENCY ....................267 SERVICING AND MAINTENANCE ..................289 TECHNICAL SPECIFICATIONS ....................346 CUSTOMER ASSISTANCE .....................
  • Page 4 INTRODUCTION UCONNECT VOICE RECOGNITION ......43 DOORS ..............23 Manual Door Locks........23 Introducing Voice Recognition....43 Symbols Key............8 Power Door Locks........24 Basic Voice Commands ......43 ROLLOVER WARNING ........... 8 Keyless Enter ‘n Go — Passive Entry ..24 Get Started...........
  • Page 5 USB/AUX Control ........71 Headlight Switch ......... 51 Engine Oil Life Reset ........91 Daytime Running Lights (DRLs) ....52 Electrical Power Outlets ......72 Display And Messages ........ 92 High/Low Beam Switch ....... 52 Power Inverter — If Equipped ...... 74 Instrument Cluster Display Menu Items ...
  • Page 6 Trailer Hitch Receiver Cover Removal — If PARKING BRAKE ..........112 CRUISE CONTROL SYSTEMS — IF EQUIPPED 128 Equipped ............159 AUTOMATIC TRANSMISSION......114 Cruise Control — If Equipped ....129 Trailer And Tongue Weight ....... 159 Adaptive Cruise Control (ACC) — Ignition Park Interlock .......115 Towing Requirements ......
  • Page 7 UCONNECT REAR SEAT ENTERTAINMENT (RSE) OCCUPANT RESTRAINT SYSTEMS ....224 REFUELING IN EMERGENCY – SYSTEM — IF EQUIPPED ........195 Occupant Restraint Systems Features..224 IF EQUIPPED ............282 Important Safety Precautions....224 Getting Started...........195 IF YOUR ENGINE OVERHEATS ......282 Seat Belt Systems ........225 Dual Video Screen ........196 MANUAL PARK RELEASE .........
  • Page 8 CUSTOMER ASSISTANCE Body Lubrication ........302 INTERIORS ............344 Windshield Wiper Blades ......302 Seats And Fabric Parts ......344 SUGGESTIONS FOR OBTAINING SERVICE FOR Exhaust System ........306 Plastic And Coated Parts......345 YOUR VEHICLE ..........353 Cooling System ..........307 Leather Surfaces ........345 Prepare For The Appointment ....353 Brake System ..........310 Glass Surfaces ..........345 Prepare A List..........353...
  • Page 9: Introduction

    For this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Dodge best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.
  • Page 10: Symbols Key

    SYMBOLS KEY ROLLOVER WARNING These statements are against operating Utility vehicles have a significantly higher rollover rate than other types of WARNING! procedures that could result in a collision, vehicles. This vehicle has a higher ground clearance and a higher center of bodily injury and/or death.
  • Page 11: Vehicle Modifications/Alterations

    Failure to use the driver and passenger seat belts provided is a major Red Warning Lights cause of severe or fatal injury. In fact, the US government notes that the universal use of existing seat belts could cut the highway death toll by Seat Belt Reminder Warning Light 10,000 or more each year and could reduce disabling injuries by two Ú...
  • Page 12 Yellow Warning Lights Red Warning Lights Engine Check/Malfunction Indicator Warning Hood Open Warning Light Light (MIL) Ú page 100 Ú page 101 Electronic Stability Control (ESC) Active Liftgate Open Warning Light Warning Light Ú page 100 Ú page 102 Oil Pressure Warning Light Electronic Stability Control (ESC) OFF Warning Light Ú...
  • Page 13 Yellow Indicator Lights Yellow Warning Lights Service Forward Collision Warning (FCW) Forward Collision Warning (FCW) OFF Indicator Light — If Equipped Light — If Equipped Ú page 104 Ú page 103 All Wheel Drive (AWD) Low Indicator Service Adaptive Cruise Control Warning Light —...
  • Page 14 White Indicator Lights Green Indicator Lights Adaptive Cruise Control (ACC) Ready Front Fog Indicator Light — If Equipped Light — If Equipped Ú page 105 Ú page 105 LaneSense Indicator Light — If Equipped Cruise Control Ready Indicator Light Ú page 105 Ú...
  • Page 15: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS The key fob does not need to be pointed at the With ignition in the ON position and the  vehicle to activate the system. The key fob also vehicle moving at 2 mph (4 km/h), all RKE commands are disabled.
  • Page 16 GETTING TO KNOW YOUR VEHICLE When the doors are unlocked, the turn signals 1 — Unlock will flash and the illuminated entry system will 2 — Liftgate be activated. When the doors are locked, the 3 — Emergency Key turn signals will flash and the horn will chirp. 4 —...
  • Page 17 GETTING TO KNOW YOUR VEHICLE Replacing The Battery In The Key Fob 1. Remove the emergency key (2) by sliding the emergency key release (1) on the back The recommended replacement battery is one of the key fob and pull the emergency key CR2032 battery.
  • Page 18: Sentry Key

    GETTING TO KNOW YOUR VEHICLE Programming And Requesting Additional NOTE: Key Fobs When having the Sentry Key Immobilizer  Programming the key fob may be performed by system serviced, bring all vehicle keys with an authorized dealer. you to an authorized dealer. NOTE: Keys must be ordered to the correct key cut ...
  • Page 19: Ignition Switch

    GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH In addition, if the light begins to flash after the The push button ignition can be placed in the bulb check, it indicates that someone used an following modes: ‘ — I invalid key fob to start the engine. Either of EYLESS NTER GNITION...
  • Page 20 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! WARNING! (Continued) If the ignition position does not change with a push of the ignition button, and the instrument Before exiting a vehicle, always shift the Do not leave children or animals inside ...
  • Page 21: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE REMOTE START — IF EQUIPPED For security, power window operation is EMOTE TART  disabled when the vehicle is in the Remote Push and release the Remote Start button on the This system uses the key fob to start Start mode.
  • Page 22: To Exit Remote Start Mode

    GETTING TO KNOW YOUR VEHICLE Ignition in OFF position the door handles, and disarm the Vehicle Security  EMOTE TART RONT EFROST system (if equipped). Then, prior to the end of the — I CTIVATION QUIPPED Fuel level meets minimum requirement ...
  • Page 23: Remote Start Windshield Wiper De-Icer Activation - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I Automatic Temperature Control (ATC) — If NOTE: EMOTE TART ANCEL ESSAGE Equipped These features will stay on through the duration QUIPPED of remote start until the ignition is placed in the The climate controls will automatically adjust to the The following messages will display in the ON/RUN position.
  • Page 24: Vehicle Security System - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED 2. Perform one of the following methods to the door key cylinder when the alarm is armed will sound the alarm when the door is lock the vehicle: The Vehicle Security system monitors the vehicle opened.
  • Page 25: Rearming Of The System

    GETTING TO KNOW YOUR VEHICLE DOORS If the Vehicle Security system is armed and the WARNING! battery becomes disconnected, the Vehicle Security system will remain armed when the ANUAL OCKS For personal security and safety in the  event of a collision, lock the vehicle doors battery is reconnected;...
  • Page 26: Power Door Locks

    GETTING TO KNOW YOUR VEHICLE If a rear door is locked, it cannot be opened Passive Entry Unlock initiates illuminated OWER OCKS  approach (low beams, license plate lamp, from inside the vehicle without first unlocking The power door lock switches are located on the door.
  • Page 27 GETTING TO KNOW YOUR VEHICLE The interior door panel lock knob will raise when If one of the vehicle doors is open, and the door The liftgate will either unlock along with the  the door is unlocked. panel switch is used to lock the vehicle, once all vehicle doors, or it will need to be unlocked by pushing the electronic liftgate release, open doors have been closed, the vehicle checks...
  • Page 28: Automatic Unlock On Exit

    GETTING TO KNOW YOUR VEHICLE To Lock The Liftgate NOTE: With a valid Passive Entry key fob within 5 ft After pushing the door handle button, you  (1.5 m) of the liftgate, push the Passive Entry must wait two seconds before you can lock or lock button located to the right of electronic unlock the doors, using either Passive Entry liftgate handle.
  • Page 29: Automatic Door Locks - If Equipped

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL — I UTOMATIC OCKS QUIPPED ANUAL ELESCOPING TEERING When enabled, the door locks will lock — I OLUMN QUIPPED automatically when the vehicle’s speed This feature allows you to tilt the steering exceeds 15 mph (24 km/h). Auto door lock column upward or downward.
  • Page 30: Power Tilt/Telescoping Steering Column - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I To unlock the steering column, push the lever EATED TEERING HEEL downward (toward the floor). To tilt the steering QUIPPED column, move the steering wheel upward or The steering wheel contains a heating element downward as desired.
  • Page 31: Driver Memory Settings - If Equipped

    GETTING TO KNOW YOUR VEHICLE Side mirrors  WARNING! Power tilt and telescopic steering column  Persons who are unable to feel pain to the  (if equipped) skin because of advanced age, chronic illness, diabetes, spinal cord injury, medica- A set of desired radio station presets ...
  • Page 32: Linking And Unlinking The Remote Keyless

    GETTING TO KNOW YOUR VEHICLE 3. Push the set (S) button on the memory 3. Once the profile has been recalled, push A recall can be canceled by pushing any of the switch, and then push the desired memory and release the set (S) button on the memory buttons during a recall (S, 1, or 2), or by button (1 or 2) within five seconds.
  • Page 33: Manual Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE ) — I Manual Front Passenger Seatback ANUAL DJUSTMENT RONT EATS Adjustment — Recline QUIPPED To adjust the seatback, lift the lever located on WARNING! the outboard side of the seat, lean back to the desired position and release the lever.
  • Page 34: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE Front Passenger Seat Fold-Flat 60/40 Split Rear Seat WARNING! (Continued) Feature — If Equipped Second Row Fold Flat Seat Do not ride with the seatback reclined so  To fold the seatback to the flat load-floor position, that the seat belt is no longer resting The second row seats can be folded flat to carry lift the recline lever and push the seatback forward.
  • Page 35 GETTING TO KNOW YOUR VEHICLE Fold-Flat Second Row Seat Release Lever Tumbled Second Row NOTE: 2. Tumble the seat forward using the pull strap WARNING! You may experience deformation in the seat located behind the seatback. cushion from the seat belt buckles if the seats Do not drive the vehicle with the second row are left folded for an extended period of time.
  • Page 36 GETTING TO KNOW YOUR VEHICLE To Raise Rear Seat This is normal and by simply opening the seats to the open position, over time the seat cushion Fold the seat rearward to its original position, will return to its normal shape. and lock it into place.
  • Page 37 GETTING TO KNOW YOUR VEHICLE 2. Tumble the seat forward using the pull strap Folding Third Row located behind the seatback. Both third row seats can be folded forward to increase the cargo area. To lower either seat, pull on the release handle located on the back of the seat and lower the seat using the pull strap located next to the release handle.
  • Page 38: Power Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE This is normal and by simply opening the seats to the open position, over time the seat cushion will return to its normal shape. WARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats Third Row Folded...
  • Page 39 GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Up Or Down Power Lumbar — If Equipped WARNING! The height of the seats can be adjusted up or Vehicles equipped with power driver or Adjusting a seat while driving may be ...
  • Page 40: Power Passenger Seat Adjustment - If Equipped

    GETTING TO KNOW YOUR VEHICLE Easy Entry/Exit Seat — If Equipped NOTE: Tilting The Seat Up Or Down The Easy Entry/Exit feature is enabled (or This feature provides automatic driver seat The angle of the seat cushion can be adjusted in disabled) through the programmable features positioning to enhance driver mobility when two directions.
  • Page 41: Heated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I Front Heated Seats — If Equipped EATED EATS QUIPPED WARNING! (Continued) The front heated seats control buttons are Do not ride with the seatback reclined so WARNING!  located on the center stack below the radio that the shoulder belt is no longer resting screen, or within the Uconnect system.
  • Page 42: Front Ventilated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I Rear Heated Seats — If Equipped RONT ENTILATED EATS ESTRAINTS QUIPPED The two second row outboard seats may be Head restraints are designed to reduce the risk equipped with heated seats. There are two heated of injury by restricting head movement in the The ventilated seats control buttons are located seat switches that allow the rear passengers to...
  • Page 43 GETTING TO KNOW YOUR VEHICLE Front Head Restraints To adjust the head restraint forward, pull the WARNING! (Continued) top of the head restraint toward the front of the Your vehicle is equipped with front four-way vehicle as desired and release. To adjust the Head restraints should never be adjusted ...
  • Page 44 GETTING TO KNOW YOUR VEHICLE The center head restraint has limited Head Restraint Removal — Rear Seats adjustment. Lift upward on the head restraint to The center head restraint can be adjusted when raise it or push downward on the head restraint occupied, or removed for Child Seat Tethering.
  • Page 45: Uconnect Voice Recognition

    GETTING TO KNOW YOUR VEHICLE UCONNECT VOICE RECOGNITION Power Folding Third Row Head Restraints ASIC OICE OMMANDS For improved visibility when in REVERSE, the The basic Voice Commands below can be given NTRODUCING OICE ECOGNITION third row head restraints can be folded using at any point while using your Uconnect system.
  • Page 46: Get Started

    1 — Push To Start Or Answer A Phone Call Some examples of “wake up” words include “Hey SiriusXM Guardian™ services support: 2 — Push The Voice Recognition Button To Begin Uconnect” or “Hey Dodge”. Radio, Media, Navigation And Climate Functions US residents visit www.driveuconnect.com/ ...
  • Page 47: Mirrors

    GETTING TO KNOW YOUR VEHICLE MIRRORS Automatic Dimming Mirror — If Equipped LLUMINATED ANITY IRRORS The rearview mirror can be adjusted up, down, To access an illuminated vanity mirror, flip down NSIDE EARVIEW IRROR left, and right. The mirror should be adjusted to one of the visors and lift the cover.
  • Page 48: Outside Mirrors

    GETTING TO KNOW YOUR VEHICLE NOTE: Outside Mirrors Folding Feature Using the mirror control switch, push on any of The sun visor blade can also be extended while the four arrows for the direction that you want All outside mirrors are hinged and may be the sun visor is against the windshield for addi- the mirror to move.
  • Page 49: Heated Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE UNIVERSAL GARAGE DOOR OPENER — I To operate HomeLink®, push and release EATED IRRORS QUIPPED  any of the programmed HomeLink® buttons. (HOMELINK®) These mirrors are heated to melt frost These buttons will activate the devices they or ice.
  • Page 50: Erasing All The Home Link Channels

    GETTING TO KNOW YOUR VEHICLE ® Typically, devices manufactured after 1995 1. Place the ignition switch into the ON/RUN RASING have rolling codes. A device with a rolling code position. HANNELS will also have a “LEARN” or “TRAIN” button 2. Place the garage door opener transmitter To erase the channels, follow this procedure: located where the antenna is attached to the 1 to 3 inches (3 to 8 cm) away from the...
  • Page 51: Miscellaneous Device

    GETTING TO KNOW YOUR VEHICLE ® T Rolling Code Garage Door Opener Final Steps Non-Rolling Code Garage Door Opener Final ROGRAMMING Steps ISCELLANEOUS EVICE NOTE: You have 30 seconds in which to initiate rolling 1. Push and hold the programmed Refer to “Programming HomeLink®...
  • Page 52: Reprogramming A Single Homelink® Button

    GETTING TO KNOW YOUR VEHICLE Canadian Radio Frequency (RF) laws require hand-held transmitter every two seconds until EPROGRAMMING INGLE transmitter signals to time-out (or quit) after HomeLink® has successfully accepted the ® B UTTON several seconds of transmission, which may not frequency signal.
  • Page 53: Exterior Lights

    GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS NOTE: Your vehicle is equipped with plastic head-  ULTIFUNCTION EVER light and fog light (if equipped) lenses that The multifunction lever is located on the left are lighter and less susceptible to stone side of the steering column.
  • Page 54: Daytime Running Lights (Drls)

    GETTING TO KNOW YOUR VEHICLE (DRL If the windshield or Automatic High Beam AYTIME UNNING IGHTS WITCH  Headlamp Control mirror is replaced, the The Daytime Running Lights (DRLs) come on Push the multifunction lever toward the mirror must be re-aimed to ensure proper instrument panel to switch the headlights to whenever the engine is running.
  • Page 55: Parking Lights And Panel Lights

    GETTING TO KNOW YOUR VEHICLE — I NOTE: EADLIGHT ELAY IGHTS QUIPPED The engine must be running before the head- To assist when exiting the vehicle, the headlight The fog lights are turned on by pushing fog light lights will come on in the automatic mode. delay feature will leave the headlights on for up button on the headlight switch.
  • Page 56: Turn Signals

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS IGNALS ATTERY AVER Move the multifunction lever up or down to Timers are set to both the interior and exterior OURTESY IGHTS activate the turn signals. The arrows on each lights to protect the life of your vehicle’s battery. The courtesy lights can be turned on by pushing side of the instrument cluster flash to show After 10 minutes, if the ignition is OFF and any...
  • Page 57 GETTING TO KNOW YOUR VEHICLE Front Map/Reading Lights — If Equipped To turn the lights off, push the switch a second Ambient Light — If Equipped time. The lights also turn on when a door is Lights are mounted in the overhead console. The overhead console is equipped with an opened.
  • Page 58: Windshield Wipers And Washers

    GETTING TO KNOW YOUR VEHICLE Dimmer Control up (brighter) or down (dimmer). When the INDSHIELD IPER PERATION headlights are on you can supplement the Courtesy and dome lights are turned on when the Rotate the end of the lever to one of the first brightness of the odometer, trip odometer, front doors are opened or when the dimmer four detent positions for intermittent settings,...
  • Page 59: Rain Sensing Wipers - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I Windshield Washers ENSING IPERS QUIPPED WARNING! To use the washer, push on the end of the lever This feature senses rain or snowfall on the Sudden loss of visibility through the (toward the steering wheel) and hold. If the lever is windshield and automatically activates the windshield could lead to a collision.
  • Page 60: Rear Window Wiper/Washer

    GETTING TO KNOW YOUR VEHICLE The Rain Sensing system has protection Rotate the center portion downward from the features for the wiper blades and arms, and will OFF position to activate the rear washer. The not operate under the following conditions: washer will continue to operate as long as the switch is held.
  • Page 61: Climate Controls

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS A/C Button Press and release this button on the The Climate Control system allows you to touchscreen to change the current regulate the temperature, air flow, and direction setting. The A/C indicator illuminates of air circulating throughout the vehicle.
  • Page 62 GETTING TO KNOW YOUR VEHICLE Recirculation Button Front Defrost Button CAUTION! Press and release this button to change Press and release the touchscreen Failure to follow these cautions can cause the system between recirculation mode button, or push and release the button on damage to the heating elements: and outside air mode.
  • Page 63 GETTING TO KNOW YOUR VEHICLE Push the Down button on the Blower Control The airflow distribution mode can be adjusted faceplate or press and slide the so air comes from the instrument panel outlets, Blower Control is used to regulate the temperature bar towards the blue floor outlets, defrost outlets and demist outlets.
  • Page 64 GETTING TO KNOW YOUR VEHICLE Floor Mode Controlling The Rear Climate Controls The Three-Zone ATC system allows for adjustment of the rear climate controls from the From The Front ATC Panel Air comes from the floor outlets. front ATC panel. A slight amount of air is directed through the defrost and side window To change the rear system settings:...
  • Page 65 GETTING TO KNOW YOUR VEHICLE Rear Lock Button NOTE: Headliner Mode The SYNC setting is only available on the touch- Press and release this button to lock Air comes from the outlets in the screen. headliner. Each of these outlets can out the rear manual temperature controls from adjusting the rear be individually adjusted to direct the...
  • Page 66 GETTING TO KNOW YOUR VEHICLE Rear Climate Control OFF Button AUTO Button The rear blower setting is displayed in the control head. To manually set the rear blower Turn the blower knob to the AUTO setting. controls to off, press the Rear Climate This feature automatically controls the Rear Mode Control Control/Blower Off button.
  • Page 67: Automatic Temperature

    GETTING TO KNOW YOUR VEHICLE Floor Mode Rotate the Rear Blower, Rear Temperature 2. Adjust the temperature you would like the  and the Rear Mode Control knobs to suit your system to maintain, by adjusting the driver, Air comes from the floor outlets. comfort needs.
  • Page 68: Climate Voice Recognition

    GETTING TO KNOW YOUR VEHICLE Manual Operation Override Winter Operation PERATING This system offers a full complement of manual To ensure the best possible heater and defroster CAUTION! override features. The AUTO symbol in the front performance, make sure the engine cooling system ATC display will be turned off when the system is functioning properly and the proper amount, type, Interior air enters the Rear Automatic...
  • Page 69 GETTING TO KNOW YOUR VEHICLE NOTE: Stop/Start System — If Equipped Activation By Remote Start Operation  While in an Autostop, the Climate Control When the Remote Start is activated and the Recirculate without A/C should not be used  system may automatically adjust airflow to for long periods, as fogging may occur.
  • Page 70: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE INTERIOR STORAGE AND EQUIPMENT Front Center Console WEATHER CONTROL SETTINGS The front center console contains both an upper Operate in (Bi-Level TORAGE and a lower storage area. Cool Sunny Mode) position. Glove Compartment To open the upper storage compartment, pull Set the mode control to upward on the small latch located on the lid.
  • Page 71 GETTING TO KNOW YOUR VEHICLE Sunglasses Bin Door Rear Full Center Console — If Equipped At the front of the console a compartment is The rear full center console contains both an provided for the storage of a pair of sunglasses. upper and a lower storage area.
  • Page 72 GETTING TO KNOW YOUR VEHICLE CAUTION! Remove any items stored in the console cupholders or devices with cords routing through upper storage area. Damage may occur to upper console lid and device cables when upper storage compartment is lifted forward. Lower Storage Compartment Fold Flat Mode NOTE:...
  • Page 73: Usb/Aux Control

    GETTING TO KNOW YOUR VEHICLE Rear Mini Center Console — If Equipped Connecting The AUX Audio Input Or Once the audio device is connected and synchronized to the vehicles USB control External USB Device An open storage area, or cubby bin with system (an external USB device may take a few removable liner, is located in the front of the Use the connection cable to connect an external...
  • Page 74: Electrical Power Outlets

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: For further information, refer to the Uconnect All accessories connected to the “battery”  Owner’s Manual Supplement. powered outlets should be removed or Second Row USB Charging Port turned off when the vehicle is not in use to protect the battery against discharge.
  • Page 75 GETTING TO KNOW YOUR VEHICLE The front power outlet is located to the right of If your vehicle is equipped with a rear full center the climate controls. console, there is also a power outlet located in the lower storage area of the rear full center console.
  • Page 76: Power Inverter - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I OWER NVERTER QUIPPED WARNING! (Continued) There is a 115 Volt, 150 Watt inverter outlet If this outlet is mishandled, it may cause an  located on the back of the center console to electric shock and failure.
  • Page 77: Wireless Charging Pad - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I The power inverter is designed with built-in from your mobile phone provider or a local IRELESS HARGING overload protection. If the power rating of electronics retailer. Please see your phone’s QUIPPED 150 Watts is exceeded, the power inverter owner’s manual for further information.
  • Page 78: Windows

    GETTING TO KNOW YOUR VEHICLE The passenger door windows can also be Automatic Window Features CAUTION! operated by using the single window controls on Auto-Down Feature The key fob should not be placed on the the passenger door trim panel. The window Both the driver and front passenger window charging pad or within 15 cm (150 mm) of it.
  • Page 79: Wind Buffeting

    GETTING TO KNOW YOUR VEHICLE NOTE: 3. Push the window switch down firmly to UFFETING Any impact due to rough road conditions may the second detent to open the window Wind buffeting can be described as the perception trigger the auto reverse function unexpectedly completely and continue to hold the switch of pressure on the ears or a helicopter-type sound in during Auto-Up.
  • Page 80: Opening And Closing The Sunroof

    GETTING TO KNOW YOUR VEHICLE PENING LOSING UNROOF UNSHADE PERATION WARNING! Express Open/Close The sunshade can be opened manually. Never leave children unattended in a  However, the sunshade will open automatically vehicle, or with access to an unlocked Push the switch rearward and release it within as the sunroof opens.
  • Page 81: Venting Sunroof

    GETTING TO KNOW YOUR VEHICLE HOOD ENTING UNROOF Push and release the "Vent" button within PENING one-half second and the sunroof will open to the To open the hood, two latches must be vent position. This is called “Express Vent”, and released.
  • Page 82: Liftgate

    GETTING TO KNOW YOUR VEHICLE If the Passive Entry button is used to open the lift- If liftgate is left open for an extended period   CAUTION! gate and all the doors unlock, the liftgate and of time, the liftgate may need to be closed To prevent possible damage, do not slam the vehicle doors must be locked again.
  • Page 83: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE There are also pinch sensors attached to the Retractable Cargo Area Cover — If ARGO EATURES  side of the liftgate. Light pressure anywhere Equipped Cargo Storage along these strips will cause the liftgate to The purpose of this cover is for privacy, not to return to the open position.
  • Page 84: Roof Luggage Rack - If Equipped

    GETTING TO KNOW YOUR VEHICLE Cargo Tie-Down Hooks WARNING! (Continued) WARNING! (Continued) The cargo tie-downs, located on the cargo area To help protect against personal injury, Do not pile luggage or cargo higher than the   floor, should be used to safely secure loads passengers should not be seated in the top of the seatback.
  • Page 85: Deploying The Crossbars

    GETTING TO KNOW YOUR VEHICLE 2. Remove the crossbar from the stowed EPLOYING ROSSBARS position by sliding the crossbar towards the 1. Starting with one crossbar, completely center of the roof. Repeat with the crossbar loosen the thumb screws at both ends of on the opposite side.
  • Page 86 GETTING TO KNOW YOUR VEHICLE 3. Starting with one crossbar, bend down the 5. Slide the crossbar into the deploy position 6. Deploy and tighten the second crossbar to pivot supports at each end. by moving it towards the matching letter in complete the deployment of the crossbars.
  • Page 87: Stowing The Crossbars

    GETTING TO KNOW YOUR VEHICLE 3. Position the crossbar along the correct side rail. TOWING ROSSBARS Make sure the letters on the crossbar align with 1. Starting with one crossbar, completely the matching letters on the side rail. loosen the thumb screws at both ends. Slide the crossbar away from the matching letter to remove it from the deployed position.
  • Page 88 GETTING TO KNOW YOUR VEHICLE 6. Repeat the procedure to stow the second WARNING! CAUTION! (Continued) crossbar on the opposite side. Cargo must be securely tied down before driving Load should always be secured to cross-  your vehicle. Improperly secured loads can fly off bars first, with tie down loops used as addi- the vehicle, particularly at high speeds, resulting tional securing points if needed.
  • Page 89: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster...
  • Page 90: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL NSTRUMENT LUSTER ESCRIPTIONS WARNING! 1. Tachometer A hot engine cooling system is dangerous. Indicates the engine speed in revolutions You or others could be badly burned by steam  per minute (RPM x 1000). or boiling coolant.
  • Page 91: Instrument Cluster Display

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY The Main Menu items consists of the following: OCATION ONTROLS Speedometer Main Gauge  The instrument cluster display is located in the Your vehicle is equipped with an instrument cluster center of the instrument cluster. display, which offers useful information to the Vehicle Info ...
  • Page 92 GETTING TO KNOW YOUR INSTRUMENT PANEL The system allows the driver to select Left Arrow Button Driver Interactive Display (Compass, Temp,   Range to Empty, Trip A, Trip B, Average Fuel information by pushing the following buttons Push the left arrow button to return to the mounted on the steering wheel: Economy, Current Fuel Economy, Time,...
  • Page 93: Engine Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL Unstored Messages Vehicles Equipped With Keyless Enter ‘n Go — NGINE ESET  Ignition This message type is displayed indefinitely or Oil Change Required Use the steering wheel instrument cluster until the condition that activated the message Your vehicle is equipped with an engine oil display controls for the following procedure(s): is cleared.
  • Page 94: Display And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: Service Tire Pressure System ISPLAY ESSAGES  If the indicator message illuminates when you Park Brake Engaged Includes the following, but not limited to:  start the vehicle, the oil change indicator system did not reset. If necessary, repeat this Front Seat Belts Unbuckled Brake Fluid Low ...
  • Page 95: Instrument Cluster Display Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL Remote Start Disabled Start To Reset Vehicle Info NSTRUMENT LUSTER ISPLAY  TEMS Service Air Bag System Push and release the up or down arrow  button until the Vehicle Info icon/title is The instrument cluster display can be used to Service Air Bag Warning Light ...
  • Page 96 GETTING TO KNOW YOUR INSTRUMENT PANEL Transmission Temperature Fuel Economy The Trip A and Trip B information will display the following: Displays the actual transmission temperature.  Push and release the up or down arrow Distance button until the Fuel Economy Menu icon/title is ...
  • Page 97 GETTING TO KNOW YOUR INSTRUMENT PANEL Stop/Start – If Equipped Screen Setup Trip (Show/Hide)  Push and release the up Push and release the up or down arrow Stop/Start  button until the Screen Setup Menu icon/title is down arrow button on the steering Trailer Tow (Show/Hide) ...
  • Page 98: Battery Saver On/Battery Saver Mode

    GETTING TO KNOW YOUR INSTRUMENT PANEL Trip A Defaults (Restores All Settings To Default In cases when the IBS detects charging system  Settings) failure, or the vehicle battery conditions are Trip B  deteriorating, electrical load reduction actions will Restore ...
  • Page 99 GETTING TO KNOW YOUR INSTRUMENT PANEL If the Battery Charge Warning Light is on it Installing options like additional lights, What to do when an electrical load reduction   may indicate a problem with the charging upfitter electrical accessories, audio action message is present (“Battery Saver On”...
  • Page 100: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES Air Bag Warning Light Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability This warning light will illuminate to The warning/indicator lights will illuminate in the Control (ESC) system.
  • Page 101 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: Electric Power Steering Fault Warning WARNING! This light shows only that the parking brake is Light Driving a vehicle with the red brake light on is applied. It does not show the degree of brake This warning light will turn on when application.
  • Page 102 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: transmission into NEUTRAL (N) and idle the Do not operate the vehicle until the cause is This light may turn on if the accelerator and vehicle. If the temperature reading does corrected. This light does not indicate how brake pedals are pressed at the same time.
  • Page 103: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL converter damage. The vehicle should be ELLOW ARNING IGHTS WARNING! serviced by an authorized dealer as soon as Engine Check/Malfunction Indicator If you continue operating the vehicle when possible if this occurs. Warning Light (MIL) the Transmission Temperature Warning Light WARNING! is illuminated you could cause the fluid to boil...
  • Page 104 GETTING TO KNOW YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Active Electronic Stability Control (ESC) OFF CAUTION! Warning Light Warning Light Do not continue driving with one or more This warning light will indicate when the This warning light indicates the ESC is flat tires as handling may be compromised.
  • Page 105 GETTING TO KNOW YOUR INSTRUMENT PANEL and can lead to tire failure. Underinflation also on your vehicle to ensure that the replacement or Anti-Lock Brake System (ABS) Warning reduces fuel efficiency and tire tread life, and alternate tires and wheels allow the TPMS to Light may affect the vehicle’s handling and stopping continue to function properly.
  • Page 106: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Service Adaptive Cruise Control Warning Service LaneSense Warning Light — If the front and rear wheels to rotate at the same speed. AWD LOW is designed for loose, slippery Light — If Equipped Equipped road surfaces only Ú...
  • Page 107: White Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Cruise Control Set Indicator Light — If Snow Mode Indicator Light — If Equipped NOTE: Equipped This light will turn on when Snow A continuous chime will sound if the vehicle is  Mode is active. This indicator light will illuminate driven more than 1 mile (1.6 km) with either when the cruise control is set to the...
  • Page 108: Blue Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL If any of these systems require service, the OBD II need to access this information to assist with NDICATOR IGHTS system will turn on the Malfunction Indicator Light the diagnosis and service of your vehicle and High Beam Indicator Light (MIL).
  • Page 109: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND Your vehicle has a simple ignition actuated test, The MIL will not flash at all and will  which you can use prior to going to the test remain fully illuminated until you place MAINTENANCE PROGRAMS station.
  • Page 110: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE CAUTION! WARNING! (Continued) Before starting your vehicle, adjust your seat, Damage to the transmission may occur if the Do not leave the key fob in or near the  adjust the inside and outside mirrors, fasten following precautions are not observed: vehicle, or in a location accessible to chil- your seat belt, and if present, instruct all other...
  • Page 111: Autopark

    STARTING AND OPERATING 3. The system starts the vehicle. If the vehicle Not In Park” message and the engine will 3. Push the ENGINE START/STOP button a fails to start, the starter will disengage remain running. Never leave a vehicle out of the second time to place the ignition to the RUN automatically after 10 seconds.
  • Page 112 STARTING AND OPERATING Vehicle speed is 1.2 mph (1.9 km/h) or less NOTE:  WARNING! In some cases the ParkSense graphic will be Ignition switched from RUN to ACC  Driver inattention could lead to failure to displayed in the instrument cluster. In these ...
  • Page 113: If Engine Fails To Start

    STARTING AND OPERATING 4WD LOW — If Equipped 15 seconds. This should clear any excess fuel in CAUTION! case the engine is flooded. Leave the ignition AutoPark will be disabled when operating the key in the RUN position, release the accelerator To prevent damage to the starter, do not vehicle in 4WD LOW.
  • Page 114: Engine Block Heater - If Equipped

    STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED ENGINE BREAK-IN RECOMMENDATIONS NOTE: A new engine may consume some oil during its The engine block heater warms the engine, and A long break-in period is not required for the first few thousand miles (kilometers) of opera- permits quicker starts in cold weather.
  • Page 115 STARTING AND OPERATING When parking on a hill, it is important to turn the WARNING! (Continued) front wheels toward the curb on a downhill grade and away from the curb on an uphill When leaving the vehicle, always make  grade.
  • Page 116: Automatic Transmission

    STARTING AND OPERATING CAUTION! WARNING! (Continued) WARNING! (Continued) If the Brake Warning Light remains on with The transmission may not engage PARK if the Unintended movement of a vehicle could injure   the parking brake released, a brake system vehicle is moving.
  • Page 117: Ignition Park Interlock

    STARTING AND OPERATING The brake pedal must also be pressed to shift GNITION NTERLOCK WARNING! (Continued) from NEUTRAL into DRIVE or REVERSE when the This vehicle is equipped with an Ignition Park vehicle is stopped or moving at low speeds. Do not leave the key fob in or near the ...
  • Page 118: Eight-Speed Automatic Transmission

    STARTING AND OPERATING When the Fuel Economy (ECO) Mode is enabled, NOTE: position), or tapping the shift paddles (+/-) the vehicle control systems will change the (if equipped) will manually select the transmission The transmission electronics are self-calibrating;  following: gear, and will display the current gear in the therefore, the first few shifts on a new vehicle instrument cluster Ú...
  • Page 119 STARTING AND OPERATING cluster (as 1, 2, 3, etc.). Move the gear selector NOTE: WARNING! (Continued) to the right (into the DRIVE [D] position) for On vehicles equipped with the electronically access to PARK, REVERSE, and NEUTRAL. shifted transfer case, ensure that the transfer The transmission may not engage PARK if ...
  • Page 120 STARTING AND OPERATING REVERSE (R) CAUTION! WARNING! (Continued) This range is for moving the vehicle backward. Before moving the transmission gear Unintended movement of a vehicle could   Shift into REVERSE only after the vehicle has selector out of PARK, you must start the injure those in or near the vehicle.
  • Page 121 STARTING AND OPERATING DRIVE (D) Manual (M) In the event of a momentary problem, the transmission can be reset to regain all forward This range should be used for most city and The MANUAL (M, +/-) position (beside the DRIVE gears by performing the following steps: highway driving.
  • Page 122 STARTING AND OPERATING NOTE: The current transmission gear will be displayed in The system will ignore attempts to upshift at  too low of a vehicle speed. Even if the transmission can be reset, we recom- the instrument cluster. mend that you visit an authorized dealer at your NOTE: Holding the (-) paddle pressed, or holding the ...
  • Page 123: Sport Mode - If Equipped

    STARTING AND OPERATING SPORT MODE — IF EQUIPPED NOTE: When additional traction is required, the transfer This system is not appropriate for conditions case AWD LOW position can be used to lock the Your vehicle is equipped with a SPORT Mode where AWD Low is recommended Ú...
  • Page 124 STARTING AND OPERATING If shift conditions are not met, one or more of NOTE: speed. Additional traction and maximum pulling the following events may occur: Do not attempt to make a shift while only the power for loose, slippery road surfaces only. front or rear wheels are spinning.
  • Page 125: Shifting Procedure

    STARTING AND OPERATING AWD Auto To AWD Low 3. Push the AWD LOW control switch. HIFTING ROCEDURE 4. After the AWD LOW position indicator light is NOTE: NOTE: on (not flashing), shift the transmission When shifting into or out of AWD LOW some gear If any of the requirements to select a new ...
  • Page 126: Tow N Go - If Equipped

    STARTING AND OPERATING TOW N GO — IF EQUIPPED sion in order to maximize vehicle perfor- UIDELINES RACK mance. Also the electric power steering If your vehicle is equipped with Drive Modes, Tow N Go combines the capabilities of the ...
  • Page 127 STARTING AND OPERATING It is recommended that the suspension Track burnishing your brakes 5. There should be a thin layer of ash when  system, brake system, prop shaft, and half inspecting the brake pads. Having the ash To avoid “green lining fade” during track use, shaft boots be checked for wear or damage layer go more than half the thickness of the brake pads and rotors must have a thermal...
  • Page 128: Fuel Saver Technology 5.7L Only - If

    STARTING AND OPERATING FUEL SAVER TECHNOLOGY 5.7L ONLY — IF STOP/START SYSTEM — IF EQUIPPED Alternate electric power steering efforts can be selected through the Uconnect System EQUIPPED The Stop/Start function is developed to reduce Ú page 175. fuel consumption. The system will stop the This feature offers improved fuel economy by If the Electric Power Steering warning icon is engine automatically during a vehicle stop if the...
  • Page 129: Possible Reasons The Engine Does Not Autostop

    STARTING AND OPERATING The engine will shut down, the tachometer will HVAC is set to full defrost mode at a high TART NGINE HILE  move to the zero position and the Stop/Start blower speed. UTOSTOP telltale will illuminate indicating you are in HVAC set to MAX A/C.
  • Page 130: To Manually Turn Off The Stop/Start System

    STARTING AND OPERATING CRUISE CONTROL SYSTEMS — IF EQUIPPED ANUALLY ANUALLY TART YSTEM TART YSTEM Your vehicle may be equipped with the Cruise Push the Stop/Start OFF switch (located on the Control system, or the Adaptive Cruise Control (ACC) system: switch bank).
  • Page 131: Cruise Control - If Equipped

    STARTING AND OPERATING — I if multiple Cruise Control functions are operated RUISE ONTROL QUIPPED WARNING! at the same time. If this occurs, the Cruise When engaged, the Cruise Control takes over Control system can be reactivated by pushing Leaving the Cruise Control system on accelerator operations at speeds greater than the Cruise Control on/off button and resetting when not in use is dangerous.
  • Page 132 STARTING AND OPERATING To Vary The Speed Setting To Accelerate For Passing To Resume Speed To Increase Or Decrease The Set Speed Press the accelerator as you would normally. To resume a previously set speed, push the RES When the pedal is released, the vehicle will button and release.
  • Page 133: Adaptive Cruise Control (Acc)

    STARTING AND OPERATING (ACC) — I Any chassis / suspension or tire size modifi- DAPTIVE RUISE ONTROL  WARNING! (Continued) cations to the vehicle will affect the perfor- QUIPPED mance of the Adaptive Cruise Control and The ACC system:  Adaptive Cruise Control (ACC) increases the driving Forward Collision Warning system.
  • Page 134 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation Adaptive Cruise Control (ACC) Menu WARNING! (Continued) The buttons on the right side of the steering The instrument cluster display will show the You should switch off the ACC system: wheel operate the ACC system. current ACC system settings.
  • Page 135 STARTING AND OPERATING The ACC screen may display once again if any of NOTE: To turn the system off, push and release the the following ACC activity occurs: You cannot engage ACC under the following Adaptive Cruise Control (ACC) on/off button conditions: again.
  • Page 136 STARTING AND OPERATING NOTE: If ACC is set when the vehicle speed is below To Cancel Fixed Speed Cruise Control can be used without 20 mph (32 km/h), the set speed will default to The following conditions cancel the ACC or Fixed an ACC distance set.
  • Page 137 STARTING AND OPERATING To Turn Off NOTE: To Vary The Speed Setting The system will turn off and erase the set speed To Increase Or Decrease The Set Speed While in ACC mode when the vehicle comes  in memory if: to a complete stop longer than two seconds, After setting a speed, you can increase the set the system will cancel.
  • Page 138 STARTING AND OPERATING NOTE: Setting The Following Distance In ACC time the button is pushed, the distance setting When you override and push the SET (+) button increases by one bar (longer). The specified following distance for ACC can be set or SET (-) button, the new set speed will be the by varying the distance setting between four bars To decrease the distance setting, push the...
  • Page 139 STARTING AND OPERATING NOTE: ACC Operation At Stop WARNING! The brake lights will illuminate whenever the If the ACC system brings your vehicle to a ACC system applies the brakes. When the ACC system is resumed, the driver must standstill while following a vehicle ahead, your ensure that there are no pedestrians, vehicles or vehicle will resume motion, without any driver A Proximity Warning will alert the driver if ACC...
  • Page 140 STARTING AND OPERATING This message can sometimes be displayed If the sensor or front end of the vehicle is “Clean Front Windshield” Warning  damaged due to a collision, see an autho- while driving in highly reflective areas (i.e. ice The “ACC/FCW Limited Functionality Clean Front and snow, or tunnels with reflective tiles).
  • Page 141 STARTING AND OPERATING When the condition that created limited Precautions While Driving With ACC The offset vehicle may move in and out of the functionality is no longer present, the system line of travel, which can cause your vehicle to In certain driving situations, ACC may have will return to full functionality.
  • Page 142 STARTING AND OPERATING Turns And Bends Using ACC On Hills Lane Changing When driving on a curve with ACC engaged, the When driving on hills, ACC may not detect a vehicle ACC may not detect a vehicle until it is system may decrease the vehicle speed and in your lane.
  • Page 143: Parksense Front/Rear Park Assist

    STARTING AND OPERATING Narrow Vehicles ride automatic braking by changing the gear or by pressing the gas pedal over 90% of its Some narrow vehicles traveling near the outer capacity during the braking event. edges of the lane or edging into the lane are not detected until they have moved fully into the Automatic brakes are not available if the ...
  • Page 144: Parksense Sensors

    STARTING AND OPERATING The automatic braking function is intended to active again if the vehicle speed is decreased to ENSE ISPLAY assist the driver in avoiding possible collisions speeds less than approximately 6 mph (9 km/h). The warning display will turn on indicating the with detected obstacles when backing up in A display warning will appear in the instrument system status when the vehicle is in REVERSE...
  • Page 145 STARTING AND OPERATING Front/Rear ParkSense Arcs 1 — No Tone/Solid Arc 6 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 7 — Fast Tone/Flashing Arc 3 — Fast Tone/Flashing Arc 8 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 9 —...
  • Page 146 STARTING AND OPERATING The vehicle is close to the obstacle when the instrument cluster display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS FOR REAR Greater than Less than Rear Distance...
  • Page 147: Parksense Warning Display

    STARTING AND OPERATING WARNING ALERTS FOR FRONT Front Distance Greater than 47 inches 47-39 inches 39-25 inches 25-12 inches Less than 12 inches (inches/cm) (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) (30 cm) Audible Alert Chime None None None Fast Continuous Arcs-Left...
  • Page 148: Enabling And Disabling Parksense

    STARTING AND OPERATING NABLING ISABLING ENSE PERATION RAILER ERVICE ENSE SSIST YSTEM ParkSense can be enabled and disabled with For vehicles equipped with an Integrated Trailer the ParkSense switch. Brake Module (ITBM), the operation of the rear During vehicle start up, when the ParkSense System sensors is automatically deactivated when the has detected a faulted condition, the instrument When the ParkSense switch is pushed...
  • Page 149: Cleaning The Parksense System

    STARTING AND OPERATING "PARKSENSE UNAVAILABLE SERVICE REQUIRED" Clean the ParkSense sensors regularly, ENSE YSTEM SAGE  messages if an object is detected within the taking care not to scratch or damage them. RECAUTIONS The sensors must not be covered with ice, five second pop-up duration.
  • Page 150: Lanesense - If Equipped

    STARTING AND OPERATING When both lane markings are detected and the WARNING! CAUTION! driver drifts out of the lane (no turn signal Drivers must be careful when backing up ParkSense is only a parking aid and it is applied), the LaneSense system provides a ...
  • Page 151: Turning Lanesense On Or Off

    STARTING AND OPERATING NOTE: system is ready to provide visual warnings in ENSE ARNING ESSAGE When operating conditions have been met, the the instrument cluster display if an uninten- The LaneSense system will indicate the current tional lane departure occurs. LaneSense system will monitor if the driver’s lane drift condition through the instrument hands are on the steering wheel and provide...
  • Page 152 STARTING AND OPERATING Left Lane Departure — Both Lanes Detected When the LaneSense system senses a lane from solid yellow to flashing yellow. At this  drift situation, the left lane line will turn solid time torque is applied to the steering wheel in When the LaneSense system is on, the lane ...
  • Page 153: Changing Lanesense Status

    STARTING AND OPERATING PARKVIEW REAR BACK UP CAMERA NOTE: HANGING ENSE TATUS The ParkView Rear Back Up Camera has The LaneSense system has settings to adjust Your vehicle is equipped with the ParkView Rear programmable modes of operation that may the intensity of the torque warning and the Back Up Camera that allows you to see an be selected through the Uconnect system...
  • Page 154: Refueling The Vehicle

    STARTING AND OPERATING REFUELING THE VEHICLE The following table shows the approximate CAUTION! (Continued) distances for each zone: To avoid vehicle damage, the vehicle must 1. Open the fuel filler door by pushing on the  Distance To The Rear Of The be driven slowly when using ParkView to be Zone outer edge of the fuel door.
  • Page 155: Vehicle Loading

    STARTING AND OPERATING VEHICLE LOADING 4. Wait five seconds before removing the fuel Payload nozzle to allow fuel to drain from nozzle. The payload of a vehicle is defined as the ERTIFICATION ABEL allowable load weight a truck can carry, 5.
  • Page 156: Trailer Towing

    STARTING AND OPERATING TRAILER TOWING Rim Size The entire vehicle should first be weighed on a commercial scale to ensure that the GVWR has This is the rim size that is appropriate for the tire In this section you will find safety tips and not been exceeded.
  • Page 157 STARTING AND OPERATING Gross Trailer Weight (GTW) Gross Axle Weight Rating (GAWR) Trailer Sway Control (TSC) The GTW is the weight of the trailer plus The GAWR is the maximum capacity of the front The TSC can be a mechanical telescoping link the weight of all cargo, consumables and and rear axles.
  • Page 158 STARTING AND OPERATING Weight-Distributing Hitch 3. Measure the height of the top of the front WARNING! (Continued) wheel opening on the fender to ground; this A weight-distributing system works by applying is height H2. Weight Distributing Systems may not be ...
  • Page 159: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
  • Page 160: Trailer Towing Weights (Maximum Trailer Weight Ratings)

    STARTING AND OPERATING RAILER OWING EIGHTS AXIMUM RAILER EIGHT ATINGS GCWR (Gross Max. GTW (Gross Max. Trailer Tongue Engine Frontal Area Combined Wt. Rating) Trailer Wt.) Wt. (See Note) 3.6L - RWD Light Duty Cooling 8,900 lb (4,037 kg) 40 sq ft (3.72 sq m) 3,500 lb (1,588 kg) 350 lb (159 kg) 3.6L - RWD...
  • Page 161: Trailer Hitch Receiver Cover Removal - If Equipped

    STARTING AND OPERATING 2. Pull the bottom of the cover outward RAILER ITCH ECEIVER OVER RAILER ONGUE EIGHT (towards you) then downwards to disengage — I EMOVAL QUIPPED Never exceed the maximum tongue weight the tabs located at the top of the hitch stamped on your bumper or trailer hitch.
  • Page 162: Towing Requirements

    STARTING AND OPERATING Consider the following items when computing CAUTION! WARNING! (Continued) the weight on the rear axle of the vehicle: Do not tow a trailer at all during the first When hauling cargo or towing a trailer, do  ...
  • Page 163 STARTING AND OPERATING Check for signs of tire wear or visible tire  WARNING! WARNING! (Continued) damage before towing a trailer. Do not connect trailer brakes to your Total weight must be distributed between   Replacing tires with a higher load carrying ...
  • Page 164 STARTING AND OPERATING Integrated Trailer Brake Module — If The user interface consists of the following: GAIN Adjustment Buttons (+/-) Equipped Pushing these buttons will adjust the brake Manual Brake Control Lever control power output to the trailer brakes in Your vehicle may have an Integrated Trailer Slide the manual brake control lever to the left 0.5 increments.
  • Page 165 STARTING AND OPERATING 3. When a trailer with electric/EOH brakes is 9. If the trailer wheels lockup (indicated by CAUTION! plugged in, the trailer connected message squealing tires), reduce the GAIN setting; if should appear in the instrument cluster display the trailer wheels turn freely, increase the Connecting a trailer that is not compatible GAIN setting.
  • Page 166 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever pulling a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven-pin wiring harness.
  • Page 167: Towing Tips

    STARTING AND OPERATING NOTE: Cruise Control — If Equipped OWING Using a lower gear while operating the vehicle Do not use on hilly terrain or with heavy  Before towing, practice turning, stopping, and under heavy loading conditions, will improve loads.
  • Page 168: Recreational Towing (Behind Motorhome)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Wheels OFF Rear-Wheel All-Wheel Drive Models With All-Wheel Drive Models With Two-Speed Towing Condition The Ground Drive Models Single-Speed Transfer Case Transfer Case See Instructions:  Transmission In PARK ...
  • Page 169: Recreational Towing Rear -Wheel Drive Models

    STARTING AND OPERATING — — A ECREATIONAL OWING ECREATIONAL OWING HEEL CAUTION! HEEL RIVE ODELS RIVE ODELS PEED RANSFER Towing with the rear wheels on the ground will DO NOT flat tow this vehicle. Damage to the cause severe transmission damage. Damage drivetrain will result.
  • Page 170 STARTING AND OPERATING Shifting Into NEUTRAL (N) 3. Shift the transmission into NEUTRAL. CAUTION! (Continued) NOTE: WARNING! Before recreational towing, be certain that  the transfer case is fully in NEUTRAL (N) Steps 1 through 3 are requirements You or others could be injured or killed if you ...
  • Page 171 STARTING AND OPERATING 4. Using a ballpoint pen or similar object, push and 8. Press and hold the brake pedal. Shift the Shifting Out Of NEUTRAL (N) hold the recessed transfer case NEUTRAL (N) transmission back into NEUTRAL. Use the following procedure to prepare your button (located by the selector switch) for four vehicle for normal usage.
  • Page 172: Driving Tips

    STARTING AND OPERATING DRIVING TIPS The ignition must be in the ON/RUN 7. When the NEUTRAL (N) indicator light turns  mode for a shift to take place and for the off, release the NEUTRAL (N) button. position indicator lights to be operable. RIVING 8.
  • Page 173: Off-Road Driving Tips

    STARTING AND OPERATING Driving Through Water Flowing Water RIVING Although your vehicle is capable of driving If the water is swift flowing and rising (as in When To Use 4WD Low — If Equipped through water, there are a number of storm run-off), avoid crossing until the water When off-road driving, shift to 4WD Low for precautions that must be considered before...
  • Page 174 STARTING AND OPERATING Maintenance Hill Climbing Remember, never drive diagonally across a hill; always drive straight up or down. After driving through deep water, inspect your NOTE: vehicle fluids and lubricants (engine oil, If the wheels start to slip as you approach the Before attempting to climb a hill, determine the crest of a hill, ease off the accelerator and transmission oil, axle, transfer case) to ensure the...
  • Page 175 STARTING AND OPERATING After Driving Off-Road Check for accumulations of plants or brush. If you experience unusual vibration after   These things could be a fire hazard. They driving in mud, slush or similar conditions, Off-road operation puts more stress on your might hide damage to fuel lines, brake hoses, check the wheels for impacted material.
  • Page 176: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS Your vehicle may be equipped with certain security WARNING! features to reduce the risk of unauthorized and For detailed information about your Uconnect 4 unlawful access to vehicle systems and wireless It is not possible to know or to predict all of ...
  • Page 177: Uconnect Settings

    MULTIMEDIA UCONNECT SETTINGS NOTE: On the Uconnect 5/5 NAV With 10.1-inch Display, push and hold the Power button on the FCA US LLC or your dealer may contact you  The Uconnect system uses a combination of buttons radio’s faceplate for a minimum of 10 seconds directly regarding software updates.
  • Page 178 MULTIMEDIA For the Uconnect 4 With 8.4-inch Display to close out of the settings screen. Pressing the When making a selection, press the button on Up or Down Arrow button on the right side of the the touchscreen to enter the desired menu. Press the Apps button, then press the screen will allow you to toggle up or down...
  • Page 179 MULTIMEDIA Language When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen language. The available setting is: Setting Name Description This setting will change the language of the Uconnect system. The available languages are Language English, Español, and Français.
  • Page 180 MULTIMEDIA Setting Name Description This setting will allow you to change the unit display. The available options are “Speed” (MPH or Units km/h), “Distance” (mi or km), “Fuel Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), and “Temperature” (°C or °F). Set Theme This setting will allow you to change the display theme.
  • Page 181 MULTIMEDIA Setting Name Description This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel Consumption” Custom (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), and “Temperature” (°C or °F) units of measurement independently. My Profile When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.
  • Page 182 This setting will allow you to change the voice options for the radio with “Option 1” and “Option 2”. This setting will change the system’s Wake Up word. The available options are “Hey” Uconnect” Wake Up Word and “Hey Dodge”. Voice Barge-in This setting will allow voice barge-in to be turned on and off.
  • Page 183 MULTIMEDIA Setting Name Description This setting will allow you to have pop-up notifications for new text messages. This setting options New Text Message Pop-Ups are “On” and “Off”. This setting will allow you to have pop-up notifications for missed calls. This setting options are Missed Calls Message “On”...
  • Page 184 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: Setting Name Description This setting will take you to the selectable options for “Forward Collision Warning (FCW)” and Automatic Emergency Braking —...
  • Page 185 MULTIMEDIA Setting Name Description Rear ParkSense Braking Assist — If Equipped This setting will turn the Rear ParkSense Braking Assist on or off. This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot.
  • Page 186 MULTIMEDIA Setting Name Description This setting will allow you to set the time format (AM/PM). Sync Time With GPS must be off for this Time Format setting to be available. The “12 hrs” setting will set the time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour format.
  • Page 187 The “Never” setting will turn the command list off. This setting will change the system’s Wake Up word. The available options are “Hey Uconnect” Wake Up Word and “Hey Dodge”. Voice Barge-in This setting will turn the Voice Barge-in function on or off.
  • Page 188 MULTIMEDIA Navigation — If Equipped When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in navigation system. These settings can change which icons display on the map, how “time to arrival is calculated”, and route types. For more information on Navigation and settings, refer to the Uconnect Owner’s Manual Supplement.
  • Page 189 MULTIMEDIA Mirrors & Wipers When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers. Setting Name Description This setting will tilt the outside side-view mirrors when the ignition is in the ON/RUN position and the transmission gear selector is in the REVERSE position.
  • Page 190 MULTIMEDIA Setting Name Description Headlights with Wipers This setting will turn the headlights on when the wipers are activated. Auto Dim High Beams This setting will allow you to turn the Auto Dim High Beams on or off. Daytime Running Lights This setting will allow you to turn the Daytime Running Lights on or off.
  • Page 191 MULTIMEDIA Setting Name Description This setting will allow you to turn the flashing of the lights when the Lock button is pushed on the Flash Lights With Lock key fob on or off. This setting will sound the horn when the Lock button is pushed on the key fob. The “Off” setting will not sound the horn when the Lock button is pushed.
  • Page 192 MULTIMEDIA Seats & Comfort/Auto-On Comfort — If Equipped When Seats & Comfort/Auto-On Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started. Setting Name Description This setting will automatically move the driver seat rearward when the engine is shut off.
  • Page 193 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. Setting Name Description This setting will adjust audio levels from specific speakers in the front/back and left/right of the...
  • Page 194 MULTIMEDIA Notifications When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system. Setting Name Description App Drawer Favoriting Pop-Ups This setting turns the “App Favorited” pop-up on or off. App Drawer Unfavoriting Pop-Ups This setting turns the “App Unfavorited”...
  • Page 195 MULTIMEDIA Setting Name Description This setting allows you to set channels that you wish to skip. A channel list will display of the Channel Skip skipped channels. Subscription Information This menu provides SiriusXM® subscription information. Accessibility — If Equipped When the Accessibility button is pressed on the touchscreen, the system will display the option related to the vehicle’s theater system. Setting Name Description The “Accessibility”...
  • Page 196 MULTIMEDIA System Information — If Equipped When the System Information button is pressed on the touchscreen, the system displays the radio system information. Setting Name Description Version Information When this feature is selected, the radio version build will be displayed. When this feature is selected, a “Software License”...
  • Page 197: Steering Wheel Audio Controls

    MULTIMEDIA STEERING WHEEL AUDIO CONTROLS UCONNECT REAR SEAT ENTERTAINMENT The left-hand control is a rocker-type switch with a push button in the center. The function of the (RSE) SYSTEM — IF EQUIPPED The Remote Sound System controls are located left-hand control is different depending on on the rear surface of the steering wheel.
  • Page 198: Dual Video Screen

    MULTIMEDIA Turn on the Rear Seat Entertainment system by screen radio or by the rear seat occupants  pushing the power button on the remote control. using the remote control. When the Video Screen(s) are open and a  DVD/Blu-ray™ disc is inserted into the disc player, the screen(s) turn(s) on automatically, the headphone transmitters turn on, and playback begins.
  • Page 199: Play A Blu-Ray™ Disc

    MULTIMEDIA ™ D 3. To watch a DVD/Blu-ray™ Disc on Channel 2 3. RSE Mute (passenger’s side rear passenger), ensure the Mute rear headphones for the current igni- The Blu-ray™ disc player is located in the center Remote Control and Headphone channel tion cycle.
  • Page 200 MULTIMEDIA 8. Cabin Audio Mode 2. While looking at Channel 1 or 2, highlight “Disc” by either pushing Up/Down/Left/ Press this button to change the cabin audio Right buttons, then push ENTER/OK. to the rear entertainment source currently shown on the Rear Media Control screen. Press the Media button on the touchscreen, ...
  • Page 201: Play Video Games

    MULTIMEDIA NOTE: MPORTANT OTES IDEO Pressing the screen on the radio while a DVD or CREEN YSTEM Blu-ray™ Disc is playing brings up the basic The Rear Seat Entertainment system is able remote control functions for DVD play such as ...
  • Page 202: Blu-Ray™ Disc Player Remote Control

    MULTIMEDIA ™ D Controls And Indicators LAYER EMOTE — When a button is pushed, the current channel or channel button is illuminated ONTROL — Turns the screen and wireless momentarily. headphone transmitter for the selected 12. SOURCE — Push to enter Source Selection Channel on or off.
  • Page 203: Headphones Operation

    MULTIMEDIA 18. Four Colored Buttons — Push to access Changing the Audio Mode for Headphones Blu-ray™ Disc features. 1. Ensure the Remote Control channel/ 19. POPUP/MENU — Push to bring up repeat screen selector switch is in the same and shuffle options, the Blu-ray™ Disc position as the headphones selector pop-up menu, the DVD title menu, or to switch.
  • Page 204: Replacing The Headphone Batteries

    MULTIMEDIA — I 4. When the Mode Selection menu appears on RESULTING FROM THE USE OF, OR ANY FAILURE OR CCESSIBILITY QUIPPED screen, use the cursor buttons on the DEFECT IN, THE PRODUCT, NOR IS APTIV LIABLE Accessibility is a feature of the DVD/Blu-ray™ remote control to navigate to the available FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, system that announces a function prior to...
  • Page 205 MULTIMEDIA System Information To change the settings, push the remote When the screen is reopened, the video ▴ ▾  control’s navigation buttons ( ) to select an screen will automatically turn back on and Disc Menu show the appropriate display menu or media. item, then push the remote control’s navigation ▸...
  • Page 206 MULTIMEDIA DVD Region Codes Recorded Discs For CD Data (or CD-ROM) discs, always use  the ISO-9660 (Level 1 or Level 2), Joliet, or The Blu-ray™ Disc player will play CD-R and The Blu-ray™ Disc player and many DVD discs Romeo format.
  • Page 207 MULTIMEDIA Compressed Audio Files (MP3 and WMA) Other compression formats such as AAC, If a disc has a damaged track which results in  MP3 Pro, Ogg Vorbis, and ATRAC3 will not audible or visible errors that persists for two The Blu-ray™...
  • Page 208: Radio Operation And Mobile Phones

    MULTIMEDIA RADIO OPERATION AND MOBILE PHONES Product Agreement The internal wireless radio operates within guidelines found in radio frequency safety This product incorporates copyright protection Under certain conditions, the mobile phone being standards and recommendations, which reflect technology that is protected by US patents and on in your vehicle can cause erratic or noisy the consensus of the scientific community.
  • Page 209: Safety

    SAFETY SAFETY FEATURES You also may experience the following normal WARNING! (Continued) characteristics when the ABS activates: (ABS) RAKE YSTEM Pumping of the Anti-Lock Brakes will diminish  ABS motor noise or clicking sounds (you may  their effectiveness and may lead to a collision. continue to hear for a short time after the stop).
  • Page 210: Electronic Brake Control (Ebc) System

    SAFETY (EBC) Anti-Lock Brake System (ABS) Warning braking distances. The BAS complements the LECTRONIC RAKE ONTROL Anti-Lock Brake System (ABS). Applying the Light YSTEM brakes very quickly results in the best BAS The yellow ABS Warning Light will turn on when Your vehicle is equipped with an advanced assistance.
  • Page 211 SAFETY Brake System Warning Light NOTE: vehicle’s speed are sufficient to potentially The DST feature is only meant to help the driver cause wheel lift, it then applies the appropriate The red Brake System Warning Light will turn on realize the correct course of action through brake and may also reduce engine power to when the ignition is placed in the ON/RUN small torques on the steering wheel, which...
  • Page 212 SAFETY Electronic Stability Control (ESC) If the ESC Activation/Malfunction Indicator Light WARNING! (Continued) begins to flash during acceleration, ease up on the ESC enhances directional control and stability accelerator and apply as little throttle as possible. Vehicle modifications, or failure to properly ...
  • Page 213 SAFETY ESC On several miles (kilometers) at speeds greater WARNING! than 30 mph (48 km/h), see an authorized This is the normal operating mode for the ESC. When in “Partial Off” mode, the TCS func- dealer as soon as possible to have the problem ...
  • Page 214 SAFETY The ESC system will make buzzing or clicking The gear selection must match vehicle uphill Disabling And Enabling HSA   sounds when it is active. This is normal; the direction (i.e., vehicle facing uphill is in This feature can be turned on or turned off. To sounds will stop when ESC becomes inactive forward gear;...
  • Page 215: Auxiliary Driving Systems

    SAFETY AUXILIARY DRIVING SYSTEMS Rain Brake Support (RBS) driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. RBS may improve braking performance in wet (BSM) — I This will allow more engine power to be applied to LIND ONITORING conditions.
  • Page 216 SAFETY The BSM detection zone covers approximately The BSM system can become blocked if snow, The area on the rear fascia/bumper where the  ice, mud, or other road contaminations accu- one lane in width, on both sides of the vehicle radar sensors are located must remain free of 12 ft (3.8 m).
  • Page 217 SAFETY The BSM system notifies the driver of objects in Entering From The Side Entering From The Rear the detection zones by illuminating the BSM Vehicles that move into your adjacent lanes Vehicles that come up from behind your vehicle warning light located in the outside mirrors.
  • Page 218 SAFETY Overtaking Traffic If you pass another vehicle slowly (with a relative speed of less than 15 mph (24 km/h)) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 15 mph (24 km/h), the warning light will not illuminate.
  • Page 219 SAFETY Rear Cross Path (RCP) When RCP is on and the vehicle is in REVERSE Blind Spot Modes (R), the driver is alerted using both the visual RCP is intended to aid the driver when backing Blind Spot has three selectable modes of operation and audible alarms, including reducing the out of parking spaces where their vision of that are available in the Uconnect system.
  • Page 220: Forward Collision Warning (Fcw) With Mitigation

    SAFETY NOTE: limited braking are intended to provide the stops the vehicle completely, the system will Whenever an audible alert is requested by the driver with enough time to react, avoid or hold the vehicle at a standstill for two seconds BSM system, the radio is also muted.
  • Page 221 SAFETY It is unsafe to test the FCW system. To FCW Braking Status And Sensitivity NOTE:  prevent such misuse of the system, after four The FCW Sensitivity and Active Braking status Changing the FCW status to “Only Warning”  Active Braking events within an ignition cycle, are programmable through the Uconnect prevents the system from providing limited...
  • Page 222: Tire Pressure Monitoring System (Tpms)

    SAFETY FCW Limited Warning The TPMS will continue to warn the driver of low RESSURE ONITORING YSTEM tire pressure as long as the condition exists, (TPMS) If the instrument cluster displays “ACC/FCW and will not turn off until the tire pressure is at Limited Functionality”...
  • Page 223 SAFETY For example, your vehicle has a recommended cold The TPMS is not a substitute for proper tire  CAUTION! (Continued) (parked for more than three hours) tire pressure of maintenance, and it is the driver’s responsi- 33 psi (227 kPa). If the ambient temperature is bility to maintain correct tire pressure using Using aftermarket tire sealants may cause the ...
  • Page 224 SAFETY NOTE: NOTE: The system will automatically update, the It is particularly important for you to regularly Your system can be set to display pressure units graphic display of the pressure value(s) will check the tire pressure in all of your tires and to in PSI, BAR or kPa.
  • Page 225 SAFETY message will not be present, and a pressure display will display a “SERVICE TPM SYSTEM" TPMS Deactivation — If Equipped value will be displayed instead of dashes. message for five seconds and then display The Tire Pressure Monitoring System (TPMS) A system fault can occur by any of the following: dashes (--) in place of the pressure value.
  • Page 226: Occupant Restraint Systems

    SAFETY To reactivate the TPMS, replace all four wheel and 5. You should read the instructions provided MPORTANT AFETY RECAUTIONS tire assemblies (road tires) with tires equipped with with your child restraint to make sure that Please pay close attention to the information in TPMS sensors.
  • Page 227: Seat Belt Systems

    SAFETY Enhanced Seat Belt Use Reminder System BeltAlert Warning Sequence WARNING! (BeltAlert) The BeltAlert warning sequence is activated Never place a rear-facing child restraint in front  when the vehicle is moving above a specified Driver and Passenger BeltAlert (if equipped) of an air bag.
  • Page 228 SAFETY The outboard front passenger seat BeltAlert is to move freely with you under normal conditions. WARNING! (Continued) not active when the outboard front passenger However, in a collision the seat belt will lock and seat is unoccupied. BeltAlert may be triggered reduce your risk of striking the inside of the Be sure everyone in your vehicle is in a seat ...
  • Page 229 SAFETY Lap/Shoulder Belt Operating Instructions WARNING! WARNING! (Continued) 1. Enter the vehicle and close the door. A lap belt worn too high can increase the A seat belt that is worn under your arm is   Sit back and adjust the seat. risk of injury in a collision.
  • Page 230 SAFETY 3. When the seat belt is long enough to fit, Lap/Shoulder Belt Untwisting Procedure insert the latch plate into the buckle until Use the following procedure to untwist a twisted you hear a “click.” lap/shoulder belt. 1. Position the latch plate as close as possible to the anchor point.
  • Page 231 SAFETY Adjustable Upper Shoulder Belt Anchorage NOTE: WARNING! (Continued) The adjustable upper shoulder belt anchorage is In the driver and outboard front passenger equipped with an Easy Up feature. This feature Misadjustment of the seat belt could  seats, the top of the shoulder belt can be allows the shoulder belt anchorage to be adjusted in reduce the effectiveness of the safety belt adjusted upward or downward to position the...
  • Page 232 SAFETY Seat Belts And Pregnant Women Seat Belt Pretensioner WARNING! The front outboard seat belt system is equipped ONLY use a Seat Belt Extender if it is physi-  with pretensioning devices that are designed to cally required in order to properly fit the remove slack from the seat belt in the event of original seat belt system.
  • Page 233 SAFETY Energy Management Feature The front outboard seat belt system is equipped with an Energy Management feature that may help further reduce the risk of injury in the event of a collision. The seat belt system has a retractor assembly that is designed to release webbing in a controlled manner.
  • Page 234: Supplemental Restraint Systems (Srs)

    SAFETY In Automatic Locking Mode, the shoulder belt is How To Engage The Automatic Locking Mode WARNING! (Continued) automatically pre-locked. The seat belt will still 1. Buckle the combination lap and shoulder belt. retract to remove any slack in the shoulder belt. Do not use the Automatic Locking Mode to ...
  • Page 235 SAFETY Your vehicle may be equipped with the following Air Bag Warning Light The ORC also includes diagnostics that will Air Bag System Components: illuminate the instrument panel Air Bag Warning The Occupant Restraint Controller Light if a malfunction is detected that could Air Bag System Components (ORC) monitors the readiness of the affect the air bag system.
  • Page 236 SAFETY Front Air Bags WARNING! WARNING! This vehicle has front air bags and lap/shoulder Ignoring the Air Bag Warning Light in your Being too close to the steering wheel or  belts for both the driver and front passenger. instrument panel during front air bag instrument panel could mean you won’t have The front air bags are a supplement to the seat the air bag system to protect you in a collision.
  • Page 237 SAFETY Driver And Passenger Front Air Bag This vehicle is equipped with a right front Front Air Bag Operation passenger Occupant Classification System Features Front Air Bags are designed to provide additional (“OCS”) that is designed to provide Passenger protection by supplementing the seat belts. Front The Advanced Front Air Bag system has Advanced Front Air Bag output appropriate air bags are not expected to reduce the risk of...
  • Page 238 SAFETY When the Occupant Restraint Controller (ORC) The Occupant Classification System (OCS) The OCS will NOT prevent deployment of the detects a collision requiring the front air bags, it consists of the following: Passenger Advanced Front Air Bag. The OCS signals the inflator units.
  • Page 239 SAFETY Front Passenger Seat Occupant Status Front Passenger Air Bag Output Rear-facing child restraint Reduced-power deployment Child, including a child in a forward-facing child restraint or booster seat* Reduced-power deployment OR Full-power deployment Properly seated adult Full-power deployment OR reduced-power deployment Unoccupied seat Reduced-power deployment * It is possible for a child to be classified as an...
  • Page 240 SAFETY In order for the OCS to operate as designed, it is Lighter Weight Passengers (Including Small Examples of improper front passenger seating important for the front passenger to be seated Adults) include: properly and properly wearing the seat belt. When a lighter weight passenger, including a The front passenger’s weight is transferred to ...
  • Page 241 SAFETY The OCS determines the front passenger’s most WARNING! probable classification. If an occupant in the front passenger seat is seated improperly, the If a child restraint system, child, small teen-  ager or adult in the front passenger seat is occupant may provide an output signal to the OCS that is different from the occupant’s seated improperly, the occupant may...
  • Page 242 SAFETY The following requirements must be strictly The Air Bag Warning Light in the instrument WARNING! followed: panel will turn on whenever the OCS is unable Unapproved modifications or service proce-  to classify the front passenger seat status. Do not modify the front passenger seat ...
  • Page 243 SAFETY Knee Impact Bolsters Supplemental Side Air Bags When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The Knee Impact Bolsters help protect the Supplemental Seat-Mounted Side The inflating SAB deploys through the seat knees of the driver and front passenger, and Air Bags (SABs) seam into the space between the occupant and...
  • Page 244 SAFETY Supplemental Side Air Bag Inflatable Curtains The SABIC deploys downward, covering the side Side Impacts (SABICs) windows. An inflating SABIC pushes the outside The Side Air Bags are designed to activate in edge of the headliner out of the way and covers the This vehicle is equipped with Supplemental certain side impacts.
  • Page 245 SAFETY Side Air Bags are a supplement to the seat belt Rollover Events WARNING! restraint system. Side Air Bags deploy in less Side Air Bags and seat belt pretensioners are time than it takes to blink your eyes. Side Air Bags need room to inflate. Do not ...
  • Page 246 SAFETY Air Bag System Components If A Deployment Occurs eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. The front air bags are designed to deflate NOTE: If the irritation continues, see your doctor. immediately after deployment.
  • Page 247 SAFETY Enhanced Accident Response System Your vehicle may also be designed to perform battery. Carefully check the vehicle for fuel any of these other functions in response to the leaks in the engine compartment and on the In the event of an impact, if the communication Enhanced Accident Response System: ground near the engine compartment and fuel network remains intact, and the power remains...
  • Page 248 SAFETY Maintaining Your Air Bag System for a short period of time, typically 30 seconds or WARNING! (Continued) less. The EDR in this vehicle is designed to record WARNING! such data as: Do not attempt to modify any part of your air ...
  • Page 249: Child Restraints

    SAFETY To read data recorded by an EDR, special Before buying any restraint system, make sure WARNING! equipment is required, and access to the that it has a label certifying that it meets all vehicle or the EDR is needed. In addition to In a collision, an unrestrained child can applicable Safety Standards.
  • Page 250 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who Either an Infant Carrier or a Convertible Child Infants and Toddlers have not reached the height or weight limits of their Restraint, facing rearward in a rear seat of the vehicle child restraint...
  • Page 251 SAFETY All children whose weight or height is above the WARNING! WARNING! (Continued) forward-facing limit for the child seat should use Never place a rear-facing child restraint in front a belt-positioning booster seat until the vehicle’s When your child restraint is not in use, ...
  • Page 252 SAFETY 4. Is the lap part of the belt as low as possible, If the answer to any of these questions was “no,” WARNING! touching the child’s thighs and not the then the child still needs to use a booster seat in this stomach? vehicle.
  • Page 253 SAFETY Lower Anchors And Tethers For CHildren seats. There are two lower anchorages located LATCH Positions For Installing Child at the back of the seat cushion where it meets (LATCH) Restraint System Restraints In This Vehicle the seatback and one top tether anchorage located behind the seating position.
  • Page 254 SAFETY 60/40 Second Row LATCH Positions (7 Passenger) Captain’s Chairs Second Row LATCH Positions (6 Passenger) Lower Anchorage Symbol (2 Anchorages Per Seating Position) Lower Anchorage Symbol (2 Anchorages Per Seating Position) Top Tether Anchorage Symbol Top Tether Anchorage Symbol Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight of the child What is the weight limit (child’s weight + weight...
  • Page 255 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Can a child seat be installed in the center No — 5 Passenger position using the inner LATCH lower 7 and 5 Passenger: Use the seat belt and tether anchor to install a child N/A —...
  • Page 256 SAFETY Locating The LATCH Anchorages Locating The Upper Tether Anchorages The lower anchorages are round bars Five Passenger Vehicles: 2nd Row Upper Tether that are found at the rear of the seat Anchorage Locations cushion where it meets the seatback. There are tether strap anchorages They are just visible when you lean behind each rear seating position...
  • Page 257 SAFETY Five Passenger Top Tether Strap Mounting Seven Passenger Top Tether Strap Mounting Pulling Down The Carpet Floor Panel To Access Top (2nd Row Bench) Tether Strap (3rd Row Bench) Six And Seven Passenger Vehicles: 2nd Row Upper Tether Anchorage Locations Six And Seven Passenger Vehicles: 3rd Row Upper Tether Anchorage Locations There are tether strap anchorages behind each rear...
  • Page 258 SAFETY Forward-facing child restraints and some Vehicle With A Center Arm Rest Tether — 2. Pull down on the tether to unhook it from rear-facing child restraints will also be equipped the plastic seat backing. Five Or Seven Passenger Seating Only with a tether strap.
  • Page 259 SAFETY Always follow the directions of the child 3. Attach the lower hooks or connectors of the installing a child restraint using the LATCH restraint manufacturer when installing your child restraint to the lower anchorages in system, buckle the seat belt behind the child child restraint.
  • Page 260 SAFETY Installing Child Restraints Using The The seat belts in the passenger seating Lap/Shoulder Belt Systems For Installing positions are equipped with a Switchable Vehicle Seat Belt Child Restraints In This Vehicle Automatic Locking Retractor (ALR) that is Child restraint systems are designed to be designed to keep the lap portion of the seat secured in vehicle seats by lap belts or the lap belt tight around the child restraint so that it is...
  • Page 261 SAFETY 60/40 Second Row (7 Passenger) Automatic Locking Captain’s Chairs Second Row (6 Passenger) Automatic Retractor (ALR) Locations Locking Retractor (ALR) Locations ALR — Switchable Automatic Locking Retractor ALR — Switchable Automatic Locking Retractor Top Tether Anchorage Symbol Top Tether Anchorage Symbol Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight of the Always use the tether anchor when using the seat belt to...
  • Page 262 SAFETY Installing A Child Restraint With A child seat. You may also move the front 7. Finally, pull up on any excess webbing to tighten seat forward to allow more room for the the lap portion around the child restraint while Switchable Automatic Locking Retractor child seat.
  • Page 263 SAFETY Installing Child Restraints Using The Top 1. Look behind the seating position where you plan to install the child restraint to find Tether Anchorage the tether anchorage. You may need to WARNING! move the seat forward to provide better access to the tether anchorage.
  • Page 264 SAFETY 3. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts.
  • Page 265: Safety Tips

    SAFETY SAFETY TIPS RANSPORTING WARNING! Air Bags deploying in the front seat could harm The top tether anchorages are not visible RANSPORTING ASSENGERS  your pet. An unrestrained pet will be thrown until the gap panel is folded down. Do not NEVER TRANSPORT PASSENGERS IN THE about and possibly injured, or injure a use the visible cargo tie down hooks,...
  • Page 266 SAFETY Air Bag Warning Light Floor Mat Safety Information WARNING! (Continued) Always use floor mats designed to fit your The Air Bag Warning Light will turn on for four ALWAYS REMOVE THE EXISTING FLOOR  vehicle. Only use a floor mat that does not to eight seconds as a bulb check when the MAT FROM THE VEHICLE before...
  • Page 267: Periodic Safety Checks You Should

    SAFETY Lights WARNING! (Continued) WARNING! (Continued) Have someone observe the operation of brake ONLY use the passenger’s side floor mat on It is recommended to only use mild soap   lights and exterior lights while you work the the passenger’s side floor area. and water to clean your floor mats.
  • Page 268: Exhaust Gas

    SAFETY The best protection against carbon monoxide XHAUST ARBON ONOXIDE ARNINGS entry into the vehicle body is a properly maintained engine exhaust system. WARNING! WARNING! Whenever a change is noticed in the sound of the Exhaust gases can injure or kill. They contain Carbon monoxide (CO) in exhaust gases is exhaust system, when exhaust fumes can be carbon monoxide (CO), which is colorless...
  • Page 269: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS ASSIST AND SOS MIRROR — IF EQUIPPED This is an emergency warning system and it should not be used when the vehicle is in The Hazard Warning Flashers switch is located motion. Use it when your vehicle is disabled and on the switch bank just below the climate it is creating a safety hazard for other motorists.
  • Page 270 IN CASE OF EMERGENCY ASSIST Call SOS call button on the Rearview Mirror or press WARNING! the cancellation button on the Device Screen. The ASSIST Button is used to automatically ALWAYS obey traffic laws and pay attention to the Termination of the SOS Call will turn off the connect you to any one of the following support road.
  • Page 271 IN CASE OF EMERGENCY 5. The SOS operator may attempt to contact WARNING! WARNING! (Continued) appropriate emergency responders and ALWAYS obey traffic laws and pay attention to the provide them with important vehicle The SOS Call system is embedded into the ...
  • Page 272 IN CASE OF EMERGENCY SOS Call System Limitations The vehicle battery loses power or becomes  WARNING! disconnected during a vehicle crash Vehicles sold in Mexico DO NOT have SOS Call Ignoring the Rearview Mirror light could  system capabilities. LTE (voice/data), 3G or 4G (data) network ...
  • Page 273: Jacking And Tire Changing

    IN CASE OF EMERGENCY NOTE: Automatic SOS — If Equipped WARNING! (Continued) Automatic SOS is a hands-free safety service Your vehicle may be transmitting data as  The jack is designed to be used as a tool for  that can immediately connect you with help in authorized by the subscriber.
  • Page 274: Jack Location

    IN CASE OF EMERGENCY 6. Block both the front and rear of the wheel To remove, press down firmly on the tabs on the OCATION diagonally opposite the jacking position. For jack storage cover. The scissor-type jack and tire changing tools are example, if changing the driver’s front tire, located in rear cargo area, below the load floor.
  • Page 275: Spare Tire Stowage

    IN CASE OF EMERGENCY Rotate the plastic thumb screw on the end of the jack to loosen the jack and remove from the bracket. Spare Tire Location Winch Nut Plug 3. Fit the jack handle extension over the CAUTION! drive nut. Use the lug wrench handle and The winch mechanism is designed for use extension to completely lower the spare tire.
  • Page 276 IN CASE OF EMERGENCY Wrench Rotation Spare Tire Sleeve And Cable 5. Pull the metal stamping toward you to 4. Slide the tire out from under the vehicle and 7. If your vehicle is equipped with a spare tire release it from the plastic plate (if equipped). rotate it vertically behind the rear fascia/ retainer and plastic plate.
  • Page 277: Jacking Instructions

    IN CASE OF EMERGENCY 1. Loosen (but do not remove) the wheel lug ACKING NSTRUCTIONS WARNING! (Continued) nuts by turning them to the left, one turn, while the wheel is still on the ground. If working on or near a roadway, be WARNING! ...
  • Page 278 IN CASE OF EMERGENCY 3. For the front tire, place the jack on the body 4. For a rear tire, place the jack in the slot on 5. Raise the vehicle by turning the jack screw flange just behind the front tire. Do not raise the rear tie-down bracket, just forward of clockwise.
  • Page 279 IN CASE OF EMERGENCY 7. Install the spare wheel/tire on the vehicle and 10. Push out the small center cap using the jack CAUTION! install the lug nuts with the cone-shaped end tool from inside the aluminum road wheel toward the wheel. Lightly tighten the nuts. Be sure to mount the spare tire with the valve and position the wheel behind the rear fascia/bumper with the protective plate...
  • Page 280 IN CASE OF EMERGENCY 11. Insert the two long tubes on the plastic CAUTION! protective plate in the lug holes of the road wheel. Push the end of the winch’s cable, The winch mechanism is designed for use spring, steel sleeve and stamped cone with the jack wrench extension tool only.
  • Page 281: Jump Starting

    IN CASE OF EMERGENCY 15. Reinstall the plastic plug into the floor of the WARNING! cargo area. Roll up and store the Jack, Tool Kit and Tire Changing Instructions. Reinstall Do not attempt jump starting if the battery is the cover for the jack in the rear storage bin. frozen.
  • Page 282: Jump Starting Procedure

    IN CASE OF EMERGENCY NOTE: TARTING ROCEDURE WARNING! Be sure that the disconnected cable ends do not touch each other, or either vehicle, until Take care to avoid the radiator cooling fan WARNING!  whenever the hood is raised. It can start properly connected for jump starting.
  • Page 283 IN CASE OF EMERGENCY Connecting The Jumper Cables 5. Start the engine in the vehicle that has the 4. Disconnect the opposite end of the booster battery, let the engine idle a few positive (+) jumper cable from the remote 1.
  • Page 284: Refueling In Emergency - If Equipped

    IN CASE OF EMERGENCY REFUELING IN EMERGENCY – IF EQUIPPED CAUTION! WARNING! The vehicle is equipped with a refueling funnel. To avoid fuel spillage and overfilling, do not Never have any smoking materials lit in or  If refueling is necessary, while using an near the vehicle when the fuel door is open “top off”...
  • Page 285: Manual Park Release

    IN CASE OF EMERGENCY NOTE: In order to move the vehicle in cases where the CAUTION! There are steps that you can take to slow down transmission will not shift out of PARK (P) (such an impending overheat condition: Driving with a hot cooling system could as a depleted battery), a Manual Park Release damage your vehicle.
  • Page 286 IN CASE OF EMERGENCY 4. Using a screwdriver or similar tool, push the metal latch in towards the tether strap. Released Position Release Latch 2. Once the tension has been released and the CAUTION! lever has been unlocked, be sure it is Release Latch stowed properly and locks into position.
  • Page 287: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY FREEING A STUCK VEHICLE NOTE: CAUTION! Push the ESC OFF switch to place the Electronic If your vehicle becomes stuck in mud, sand or Stability Control (ESC) system in “Partial OFF” Racing the engine or spinning the wheels ...
  • Page 288: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. If the transmission and drivetrain are operable, disabled 4x4 vehicles may also be towed as described under Ú page 166. All-Wheel Drive Wheels OFF The Models With...
  • Page 289: Rear Wheel Drive Models

    IN CASE OF EMERGENCY Proper towing or lifting equipment is required to HEEL RIVE ODELS CAUTION! prevent damage to your vehicle. Use only tow FCA US LLC recommends towing your vehicle bars and other equipment designed for this Towing faster than 30 mph (48 km/h) or ...
  • Page 290: All Wheel Drive Models

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE HEEL RIVE ODELS CAUTION! SYSTEM (EARS) FCA US LLC recommends towing with all wheels Front or rear wheel lifts must not be used  OFF the ground. Acceptable methods are to tow (if the remaining wheels are on the ground). This vehicle is equipped with an Enhanced the vehicle on a flatbed or with one end of the Internal damage to the transmission or...
  • Page 291: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING illuminate as early as 3,500 miles (5,600 km) Once A Month Or Before A Long Trip: since last reset. Have your vehicle serviced as Check engine oil level  Your vehicle is equipped with an automatic soon as possible, within the next 500 miles oil change indicator system.
  • Page 292: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plans for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter.  Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
  • Page 293 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
  • Page 294 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect accessory drive belt tensioner and pulley, replace if necessary. Change transfer case fluid. Replace PCV valve. 1. The spark plug change interval is mileage based only, yearly intervals do not apply. WARNING! WARNING! (Continued) You can be badly injured working on or...
  • Page 295: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Remote Jump Start Positive Terminal 6 — Engine Air Cleaner Filter 2 — Power Distribution Center (Fuses) 7 — Washer Fluid Reservoir Cap 3 — Engine Oil Dipstick 8 — Engine Coolant Pressure Cap 4 —...
  • Page 296: L Engine

    SERVICING AND MAINTENANCE 5.7L E NGINE 1 — Remote Jump Start Negative Terminal 6 — Engine Air Cleaner Filter 2 — Remote Jump Start Positive Terminal 7 — Washer Fluid Reservoir Cap 3 — Power Distribution Center (Fuses) 8 — Engine Oil Dipstick 4 —...
  • Page 297: Checking Oil Level

    SERVICING AND MAINTENANCE HECKING EVEL CAUTION! WARNING! To ensure proper engine lubrication, the engine Overfilling or underfilling the crankcase Commercially available windshield washer oil must be maintained at the correct level. will cause aeration or loss of oil pressure. solvents are flammable. They could ignite and Check the oil level at regular intervals, such as This could damage your engine.
  • Page 298: Pressure Washing

    SERVICING AND MAINTENANCE NOTE: RESSURE ASHING WARNING! (Continued) Intentional tampering with emissions control Cleaning the engine compartment with a high systems may void your warranty and could result in Battery posts, terminals, and related acces-  pressure washer is not recommended. sories contain lead and lead compounds.
  • Page 299: Engine Oil Filter

    SERVICING AND MAINTENANCE NOTE: Disposing Of Used Engine Oil And Oil CAUTION! Hemi engines (5.7L) at times can tick right after Filters startup and then quiet down after approximately Do not use chemical flushes in your engine oil Care should be taken in disposing of used 30 seconds.
  • Page 300: Engine Air Cleaner Filter

    SERVICING AND MAINTENANCE Engine Air Cleaner Filter Removal 3. Remove the engine air cleaner filter from NGINE LEANER ILTER the housing assembly. 1. Release the spring clips from the engine air For the proper maintenance intervals Ú page 290. cleaner filter cover. WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case...
  • Page 301: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE Engine Air Cleaner Filter Installation Refrigerant Recovery And Recycling WARNING! R-134a — If Equipped NOTE: Use only refrigerants and compressor lubri-  R-134a Air Conditioning Refrigerant is a Inspect and clean the housing if dirt or debris is cants approved by FCA for your air condi- hydrofluorocarbon (HFC) that is an present before replacing the engine air cleaner...
  • Page 302 SERVICING AND MAINTENANCE Cabin Air Filter NOTE: When disengaging the glove compartment door For the proper maintenance intervals from its hinges, there will be some resistance. Ú page 290. 4. With the glove compartment door loose, WARNING! remove the glove compartment tension tether and tether clip by sliding the clip Do not remove the cabin air filter while the toward the face of the glove compartment...
  • Page 303: Accessory Drive Belt Inspection

    SERVICING AND MAINTENANCE 5. Remove the filter cover by disengaging the 7. Install the A/C air filter with the arrow on the CCESSORY RIVE NSPECTION retaining tab and mid way snap that secures filter pointing toward the floor. When the filter cover to the HVAC housing. installing the filter cover, make sure the WARNING! retaining tabs fully engage the cover.
  • Page 304: Body Lubrication

    SERVICING AND MAINTENANCE Any belt with cracks running along a rib must be Belt broken (note: identify and correct components to ensure proper function. When  problem before new belt is installed) replaced. Also have the belt replaced if it has performing other underhood services, the hood excessive wear, frayed cords or severe glazing.
  • Page 305 SERVICING AND MAINTENANCE NOTE: Front Wiper Blade Removal/Installation 2. To disengage the wiper blade from the wiper Life expectancy of wiper blades varies arm, flip up the release tab on the wiper CAUTION! depending on geographical area and frequency blade and while holding the wiper arm with of use.
  • Page 306 SERVICING AND MAINTENANCE 3. With the wiper blade disengaged, remove the Installing The Front Wipers Rear Wiper Blade Removal/Installation wiper blade from the wiper arm by holding 1. Lift the wiper arm off of the glass, until the 1. Lift the rear wiper arm pivot cap away from the wiper arm with one hand and separating wiper arm is in the full up position.
  • Page 307 SERVICING AND MAINTENANCE 2. Lift the rear wiper arm fully off the glass. NOTE: Installing The Rear Wiper Resistance will be accompanied by an audible 1. Lift the rear wiper arm pivot cap away from snap. the glass to allow the rear wiper blade to be 4.
  • Page 308: Exhaust System

    SERVICING AND MAINTENANCE Under normal operating conditions, the catalytic XHAUST YSTEM WARNING! (Continued) converter will not require maintenance. However, it The best protection against carbon monoxide is important to keep the engine properly tuned to A hot exhaust system can start a fire if you ...
  • Page 309: Cooling System

    SERVICING AND MAINTENANCE Engine Coolant Checks If the engine coolant (antifreeze) is dirty or OOLING YSTEM contains visible sediment, have an authorized Check the engine coolant (antifreeze) dealer clean and flush with OAT coolant WARNING! protection every 12 months (before the onset of (conforming to MS.90032).
  • Page 310 SERVICING AND MAINTENANCE Do not use water alone or alcohol-based Please review these recommendations for NOTE:  engine coolant products. Do not use addi- using Organic Additive Technology (OAT) engine It is the owner's responsibility to maintain the  tional rust inhibitors or antirust products, as coolant that meets the requirements of FCA proper level of protection against freezing they may not be compatible with the radiator...
  • Page 311 SERVICING AND MAINTENANCE Cooling System Pressure Cap Disposal Of Used Coolant Do not overfill the coolant expansion bottle.  The cap must be fully tightened to prevent loss Used ethylene glycol-based coolant (antifreeze) is Check the coolant freeze point in the radiator ...
  • Page 312: Brake System

    SERVICING AND MAINTENANCE abnormally low, check the system for leaks. RAKE YSTEM WARNING! (Continued) For further information Ú page 352. In order to ensure brake system performance, Do not allow petroleum based fluid to  all brake system components should be WARNING! contaminate the brake fluid.
  • Page 313: Front/Rear Axle Fluid

    SERVICING AND MAINTENANCE Fluid Level Check Routine fluid and filter changes are not RONT LUID required. However, change the fluid and filter if The fluid level is preset at the factory and does For normal service, periodic fluid level checks the fluid becomes contaminated (with water, not require adjustment under normal operating are not required.
  • Page 314: Transfer Case

    SERVICING AND MAINTENANCE Rear Axle Fluid Level Check Adding Fluid USES The rear axle oil level needs to be no lower than With the vehicle in a level position, fill the General Information 1/8 inch (3 mm) below the bottom of the fill transfer case to bottom edge of fill plug hole.
  • Page 315 SERVICING AND MAINTENANCE The fuses protect electrical systems against Underhood Fuses excessive current. The Power Distribution Center is located in the When a device does not work, you must check engine compartment near the battery jump start the fuse element inside the blade fuse for a posts.
  • Page 316 SERVICING AND MAINTENANCE * If Equipped Cavity Cartridge Fuse Micro Fuse Description – – Spare – – Spare 60 Amp Yellow – Radiator Fan* 60 Amp Yellow – ESC Pump NON-SRT 40 Amp Green – Air Suspension Compressor* 40 Amp Green –...
  • Page 317 SERVICING AND MAINTENANCE * If Equipped Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Passenger Door Module – – Spare 20 Amp Blue – Engine Control Module/Power Control Module* 30 Amp Pink – CBC #1/Interior Light 30 Amp Pink –...
  • Page 318 SERVICING AND MAINTENANCE * If Equipped Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Power Liftgate – 10 Amp Red Daytime Running Lights/Headlamp Leveling* – – Spare – 20 Amp Yellow Horn – – Spare – 10 Amp Red Diagnostic Port –...
  • Page 319 SERVICING AND MAINTENANCE * If Equipped Cavity Cartridge Fuse Micro Fuse Description – 15 Amp Blue HID Headlamps LH* – 10 Amp Red SCR Pumps Relay* – 15 Amp Blue Transmission Control Module – 10 Amp Red PM Sensor – 10 Amp Red Air Conditioning Clutch Ignition Coils / Ignition Coil Capacitors / Short Runner Valve Actuator —...
  • Page 320 SERVICING AND MAINTENANCE * If Equipped Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red – 10 Amp Red Drivetrain Control Module/ELSD* – 10 Amp Red Engine Control Module (ECM) /Electric Power Steering (EPS)/PCM – – Spare – 10 Amp Red Universal Garage Door Opener/Anti-Intrusion Module —...
  • Page 321 SERVICING AND MAINTENANCE * If Equipped Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Rear Camera / Blind Spot Sensor * – 10 Amp Red Rear Seat Heater Switch* – 20 Amp Yellow Rear Heated Seats/Heated Steering Wheel* –...
  • Page 322: Bulb Replacement

    SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs NOTE: See an authorized dealer for LED bulb replacement. Interior Bulbs Bulb Name Bulb Number Glove Compartment Lamp Grab Handle Lamp L002825W5W Overhead Console Reading Lamps VT4976 Visor Vanity Lamp V26377 Rear Cargo Lamp 214–2 Underpanel Courtesy Lamps Instrument Cluster (General Illumination)
  • Page 323 SERVICING AND MAINTENANCE Exterior Bulbs Bulb Name Bulb Number Low Beam/High Beam/LED Headlamps LED (Serviced at an authorized dealer) Front Turn Signal Lamps (Bulb Reflector) 7444NA Front DRL/Turn/Park Lamp (Premium) LED (Serviced at an authorized dealer) Front DRL/Park Lamp (Base) LED (Serviced at an authorized dealer) Front Side Marker Lamps LED (Serviced at an authorized dealer)
  • Page 324: Tires

    SERVICING AND MAINTENANCE Bulb Replacement Front Fog Lamps Center High Mounted Stop Lamp (CHMSL) The front fog lamps are LEDs. See an authorized The Center High Mounted Stop Lamp is an LED NOTE: dealer for service. assembly. See an authorized dealer for Lens fogging can occur under certain atmo- replacement.
  • Page 325 SERVICING AND MAINTENANCE Tire Markings NOTE: Temporary spare tires are designed for  temporary emergency use only. Temporary P (Passenger) — Metric tire sizing is based on US  high pressure compact spare tires have the design standards. P-Metric tires have the letter letter “T”...
  • Page 326 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 327 SERVICING AND MAINTENANCE EXAMPLE: Service Description: 95 = Load Index A numerical code associated with the maximum load a tire can carry  H = Speed Symbol A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions ...
  • Page 328 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.
  • Page 329 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-pillar The vehicle B-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of Cold Tire Inflation Pressure three hours.
  • Page 330 SERVICING AND MAINTENANCE Tire And Loading Information Placard Loading Steps For Determining Correct Load Limit— The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on (1) Locate the statement “The combined your vehicle. You will not exceed the tire's load weight of occupants and cargo should carrying capacity if you adhere to the loading never exceed XXX kg or XXX lbs.”...
  • Page 331 SERVICING AND MAINTENANCE (4) The resulting figure equals the (6) If your vehicle will be towing a trailer, NOTE: available amount of cargo and luggage load from your trailer will be transferred If your vehicle will be towing a trailer, load from ...
  • Page 332 SERVICING AND MAINTENANCE...
  • Page 333: Tires - General Information

    SERVICING AND MAINTENANCE Safety Both underinflation and overinflation affect the WARNING! stability of the vehicle and can produce a feeling WARNING! Overloading of your tires is dangerous. of sluggish response or over responsiveness in Overloading can cause tire failure, affect the steering.
  • Page 334 SERVICING AND MAINTENANCE Ride Comfort And Vehicle Stability Inflation pressures specified on the placard are Tire Pressures For High Speed Operation always “cold tire inflation pressure”. Cold tire Proper tire inflation contributes to a FCA advocates driving at safe speeds and inflation pressure is defined as the tire pressure comfortable ride.
  • Page 335 SERVICING AND MAINTENANCE Radial Ply Tires Run Flat Tires — If Equipped Tire Spinning Run Flat tires allow you the capability to drive When stuck in mud, sand, snow, or ice WARNING! 50 miles (80 km) at 50 mph (80 km/h) after a conditions, do not spin your vehicle's wheels Combining radial ply tires with other types of tires rapid loss of inflation pressure.
  • Page 336 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire NOTE: Wheel valve stem must be replaced as well Tread wear indicators are in the original The service life of a tire is dependent upon when installing new tires due to wear and tear equipment tires to help you in determining varying factors including, but not limited to: in existing tires.
  • Page 337: Tire Types

    SERVICING AND MAINTENANCE It is recommended to replace the two front tires YPES WARNING! (Continued) or two rear tires as a pair. Replacing just one tire All Season Tires — If Equipped can seriously affect your vehicle’s handling. Never use a tire with a smaller load index or ...
  • Page 338: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE Summer tires do not contain the all season Snow tires generally have lower speed ratings CAUTION! designation or mountain/snowflake symbol on than what was originally equipped with your the tire sidewall. Use Summer tires only in sets vehicle and should not be operated at Because of the reduced ground clearance, do not of four;...
  • Page 339 SERVICING AND MAINTENANCE Compact Spare Tire — If Equipped Since this tire has limited tread life, the original WARNING! equipment tire should be repaired (or replaced) The compact spare is for temporary emergency Compact and collapsible spares are for and reinstalled on your vehicle at the first use only.
  • Page 340: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE Full Size Spare — If Equipped chemicals used to melt ice or control dust on WARNING! dirt roads. Use a soft cloth or sponge and mild The full size spare is for temporary emergency Limited use spares are for emergency use soap to wipe away promptly.
  • Page 341: Snow Traction Devices

    SERVICING AND MAINTENANCE Dark Vapor Chrome, Black Satin Chrome, or RACTION EVICES CAUTION! Low Gloss Clear Coat Wheels Use of traction devices require sufficient Do not use scouring pads, steel wool, a bristle tire-to-body clearance. Due to limited clearance, CAUTION! brush, metal polishes or oven cleaner.
  • Page 342 SERVICING AND MAINTENANCE Snow Traction Device (maximum projection Axle Tire/Wheel Size Trim Level beyond tire profile or equivalent) SPECIAL SERVICE P265/60R18 265/60R18 265/50R20 Rear THULE XG-12 PRO or Equivalent 265/50R20 CITADEL Snow Traction Device (maximum projection Axle Tire/Wheel Size Trim Level beyond tire profile or equivalent) P265/60R18 PURSUIT...
  • Page 343: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE increase tread life, help to maintain mud, snow, WARNING! CAUTION! (Continued) and wet traction levels, and contribute to a Using tires of different size and type smooth, quiet ride. Drive cautiously and avoid severe turns and  (M+S, Snow) between front and rear axles can large bumps, especially with a loaded For the proper maintenance intervals...
  • Page 344: Department Of Transportation Uniform Tire Quality Grades

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION significantly from the norm due to its ability to dissipate heat, when tested variations in driving habits, service under controlled conditions on a UNIFORM TIRE QUALITY GRADES practices, and differences in road specified indoor laboratory test wheel. The following tire grading categories characteristics and climate.
  • Page 345: Storing The Vehicle

    SERVICING AND MAINTENANCE STORING THE VEHICLE parking, which exposes your vehicle to airborne NDERBODY AINTENANCE contaminants, road surfaces on which the Cleaning Headlights If you are storing your vehicle for more than vehicle is operated, extreme hot or cold weather three weeks, we recommend that you take the and other extreme conditions will have an Your vehicle is equipped with plastic headlights...
  • Page 346: Preserving The Bodywork

    SERVICING AND MAINTENANCE INTERIORS Special Care RESERVING ODYWORK If you drive on salted or dusty roads or if you  Washing EATS ABRIC ARTS drive near the ocean, hose off the undercar- Wash your vehicle regularly. Always wash  riage at least once a month. Use Mopar®...
  • Page 347: Plastic And Coated Parts

    SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster NOTE: WARNING! If equipped with light colored leather, it tends to Lenses A frayed or torn belt could rip apart in a show any foreign material, dirt, and fabric dye The lenses in front of the instruments in this transfer more so than darker colors.
  • Page 348: Technical Specifications

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER BRAKE SYSTEM WHEEL AND TIRE TORQUE SPECIFICATIONS The Vehicle Identification Number (VIN) is found Your vehicle is equipped with dual hydraulic Proper lug nut/bolt torque is very important to on a label located on the left front corner of the brake systems.
  • Page 349: Fuel Requirements

    TECHNICAL SPECIFICATIONS Inspect the wheel mounting surface prior to Poor quality gasoline can cause problems such mounting the tire and remove any corrosion or as hard starting, stalling, and hesitations. If you loose particles. experience these symptoms, try another brand of gasoline before considering service for the vehicle.
  • Page 350: Reformulated Gasoline

    TECHNICAL SPECIFICATIONS The use of 89 octane “Plus” gasoline is minimizing engine and fuel system deposits. Problems that result from using gasoline recommended for optimum performance and When available, the usage of TOP TIER containing more than 15% ethanol (E-15) or fuel economy.
  • Page 351: Cng And Lp Fuel System Modifications

    TECHNICAL SPECIFICATIONS CNG A LP F YSTEM YSTEM AUTIONS CAUTION! (Continued) ODIFICATIONS The use of fuel additives, which are now CAUTION!  Modifications that allow the engine to run on being sold as octane enhancers, is not Follow these guidelines to maintain your Compressed Natural Gas (CNG) or Liquid Propane recommended.
  • Page 352: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L and 5.7L Engines 24.6 Gallons 93.0 Liters Engine Oil With Filter 3.6L Engine 6 Quarts 5.6 Liters 5.7L Engine 7 Quarts 6.6 Liters Cooling System * 3.6L Engine – Without Trailer Tow Package 10.4 Quarts 9.9 Liters 3.6L Engine –...
  • Page 353: Engine Fluids And Lubricants

    TECHNICAL SPECIFICATIONS ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part We recommend you use Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Engine Coolant Additive Technology) meeting the requirements of FCA Material Standard MS.90032. We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of FCA Material Standard Engine Oil –...
  • Page 354: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS CHASSIS FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part Use only Mopar® ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the Automatic Transmission correct fluid may affect the function or performance of your transmission. Transfer Case –...
  • Page 355: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE dealers, you may obtain a rental vehicle This is why you should always talk to an (additional charges may apply). If you need a authorized dealer’s service manager first. FOR YOUR VEHICLE rental, it is advisable to make these If for some reason you are still not satisfied, arrangements when you call for an appointment.
  • Page 356: Fca Us Llc Customer Center

    CUSTOMER ASSISTANCE FCA US LLC C US V USTOMER ENTER UERTO IRGIN SLANDS ERVICE ONTRACT P.O. Box 21–8004 FCA Caribbean LLC You may have purchased a service contract for a vehicle to help protect you from the high cost Auburn Hills, MI 48321–8004 P.O.
  • Page 357: Warranty Information

    CUSTOMER ASSISTANCE WARRANTY INFORMATION REPORTING SAFETY DEFECTS We appreciate that you have made a major investment when you purchased the vehicle. See the Warranty Information for the terms and 50 U An authorized dealer has also made a major NITED TATES provisions of FCA US LLC warranties applicable investment in facilities, tools, and training to...
  • Page 358: In Canada

    CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS To contact NHTSA, you may call the Vehicle Owner's Manuals Safety Hotline toll free at 1-888-327-4236 These Owner's Manuals have been prepared To order the following manuals, you may use (TTY: 1-800-424-9153); or go to http:// with the assistance of service and engineering either the website or the phone numbers listed...
  • Page 359: General Information

    CUSTOMER ASSISTANCE GENERAL INFORMATION Le présent appareil est conforme aux CNR La operación de este equipo está sujeta a las d`Innovation, Science and Economic siguientes dos condiciones: The following regulatory statement applies to all Development applicables aux appareils radio 1. es posible que este equipo o dispositivo no Radio Frequency (RF) devices equipped in this exempts de licence.
  • Page 360 INDEX  ......355 ..... 234 WARRANTY INFORMATION Redundant Air Bag Warning Light Alterations/Modifications ..........241 ............9 Side Air Bags Vehicle ........263 ....307 Transporting Pets Antifreeze (Engine Coolant) .........346 ........98 ............ 309 About Your Brakes Air Bag Light Disposal .......
  • Page 361 Cargo Area Cover ..........81 Climate Control ..........59 Battery ............99 Cargo Compartment ........81 Automatic ............59 Charging System Light ......... 99 Light ............81 Cold Weather Operation ........ 111 Keyless Key Fob Replacement ....15 Luggage Carrier ...........82 Compact Spare Tire ........337 Battery Saver Feature ........
  • Page 362 ........286 ..107 Disabled Vehicle Towing Emission Control System Maintenance ............293 Disposal Engine Filters .......309 ..........298 ..........298 Antifreeze (Engine Coolant) Air Cleaner Air Cleaner ..........99 ..........112 ......67 Door Ajar Block Heater Air Conditioning ........99 ..... 112 ..........
  • Page 363 Fuel ...............347 Switch ............17 Additives ...........348 Hazard Warning Flashers ......267 Immobilizer (Sentry Key) ........16 Clean Air ............348 Head Restraints ..........40 Inside Rearview Mirror ......45 Economy Mode ..........115 Headlights Instrument Cluster ........87 Ethanol ............348 Automatic ............52 Display ............89 Gasoline ............347 Cleaning ...........
  • Page 364 ..........265 ............54 Leaks, Fluid Interior ..........272 ........... 334 ........104 Jack Location Life Of Tires LaneSense ..........275 ............80 ........53 Jack Operation Liftgate Lights On Reminder ..271 .......58 ........... 103 Jacking And Tire Changing Instructions Liftgate Window Wiper/Washer Low Fuel ........275 ............
  • Page 365 Vanity Mirror ..........45 Mirrors .............45 Dipstick ............. 295 Warning Instrument Cluster Descriptions ..100 Electric Remote ...........46 Disposal ............ 297 Load Shed Battery Saver Mode ....... 96 Exterior Folding ..........46 Filter ............297 Load Shed Battery Saver On ......96 Heated ............47 Filter Disposal...
  • Page 366 ........311 ..........40 Power Rear Axle (Differential) Restraints, Head ............346 ..........151 ......81 Brakes Rear Camera Retractable Cargo Area Cover .......313 ..........217 ..........8 Distribution Center (Fuses) Rear Cross Path Roll Over Warning ..........24 ....... 141 ..........82 Door Locks Rear ParkSense System Roof Type Carrier ............
  • Page 367 Operating Instructions .......227 Shifting ............114 Storage ............68 Pregnant Women ........230 Automatic Transmission ....114 Storage, Vehicle ........66 Pretensioners ..........230 Shoulder Belts ..........226 Storing Your Vehicle ........343 Rear Seat ..........226 Signals, Turn ....... 105 Sun Roof ...........77 Reminder ..........225 Snow Chains (Tire Chains)
  • Page 368 ......331 ......166 General Information Towing Behind A Motorhome ..........332 ..........213 High Speed Traction Control Uconnect Settings ........332 ......213 ..24 Inflation Pressure Trailer Sway Control (TSC) Customer Programmable Features ..........334 ..........154 ....24 Life Of Tires Trailer Towing Passive Entry Programming ........
  • Page 369 ............76 Windows ......267 ............76 Warning Flashers, Hazard Power ..........77 Warning Lights (Instrument Cluster Reset Auto-Up ..........102 ........264 Descriptions) Windshield Defroster ........... 8 .......56 Warnings, Roll Over Windshield Washers ........355 ............295 Warranty Information Fluid  ......355 ......302 WARRANTY INFORMATION Windshield Wiper Blades ......56 ...........56...
  • Page 371 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Dodge brand vehicle and to provide a convenient reference source for common questions.
  • Page 372 ©2020 FCA US LLC. ALL RIGHTS RESERVED. TOUS DROITS RÉSERVÉS. DODGE IS A REGISTERED TRADEMARK OF FCA US LLC OR FCA CANADA INC., USED UNDER LICENSE. DODGE EST UNE MARQUE DÉPOSÉE DE FCA US LLC OU FCA CANADA INC., UTILISÉE SOUS LE PERMIS.

This manual is also suitable for:

Durango 2021

Table of Contents