Technical Specifications; Vehicle Identification Number; Brake System; Wheel And Tire Torque Specifications - Dodge DURANGO 2021 Owner's Manual

346

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found
on a label located on the left front corner of the
instrument panel pad, visible from outside of
the vehicle through the windshield.
Windshield VIN Label Location
NOTE:
It is illegal to remove or alter the VIN.

TECHNICAL SPECIFICATIONS

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. However, there will
be some loss of overall braking effectiveness.
You may notice increased pedal travel during
application, greater pedal force required to slow
or stop, and potential activation of the Brake
Warning Light.
In the event power assist is lost for any reason
(i.e., repeated brake applications with the engine
off) the brakes will still function. However, the
effort required to brake the vehicle will be much
greater than that required with the power system
operating.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to the
vehicle. Any time a wheel has been removed and
reinstalled on the vehicle, the lug nuts/bolts
should be torqued using a properly calibrated
torque wrench using a six sided (hex) deep wall
socket.
T S
ORQUE PECIFICATIONS
Base Model Vehicle
Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
130 Ft-Lbs
M14 x 1.50
(176 N·m)
**Use only authorized dealer recommended
lug nuts/bolts and clean or remove any dirt or
oil before tightening.
Lug Nut/Bolt
Socket Size
22 mm