Advertisement
You will need a Phillips Head Screw Driver and a Rubber Mallet to Assemble.
STEP 6 :Connect second leg(J) to the opposite end of the
stringer(I) by inserting cam pins(C) into locks(E) and tighten-
.
ing
J
STEP 8 :
feet are pointed up and insert the cam pins(C) that are at-
tached to table into locks(E) on the legs/stringer and tighten
locks once in place.
When moving table hold it so you have one hand on each side of the gap where table tops join.
LCTRT12047, VCTRT12047 - INSTRUCTIONS
You will need 2 person(s) for this assembly.
I
J
STEP 7 : Attach 4 corner brackets(G) with 6 screws(B)
each bracket to the 4 corners where the legs(J) meet the
stringer(I).
J
STEP 9 : Attach remaining 2 corner brackets(G) with 4
screws(B) each to the stringer(I) and table bottom where the
2 tops(H) come together.
G
I
J
Advertisement
