Regency Legacy LBC4123 Instructions

You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
Hardware: A: Cam Pins(13) • B: 12 Cam Caps(12) • C: Wood Screws(4) • D: Shelf Pins(8)
A B
C
Parts: E: Top Support(2) • F: Bottom Stringer(1) • G: Bottom(1) • H: Back(1) • I: Side(2) J: Shelves(2)
E
F
G
STEP 1 : Connect/tighten(figure 1) the
Bottom Stringer(F).
G
F
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Stand Up Bookcase LBC4123 • INSTRUCTIONS
D
H
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Figure 1: To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
I
STEP 2 : Lay Back(H) and both Sides(I) down with all holes facing up.
Insert 13 Cam Pins(A) as shown below.
H
A
J
A A
A
A
A
A
I I
A
A
A
A
A
A