Regency SRDRT2BF Instructions

You will need a Phillips Head Screwdriver and a Rubber Mallet to Assemble.
Reception Desk
Hardware :
A: Corner Brackets(6) • B: Small Screws(36) • C: Cam Pins(16) • D: Cam Covers(16)
A
Parts :
E1: Right Leg E2: Left Leg • F: Desk Top • G: Transaction Top • H: Modesty
E1
STEP 1 : Screw cam pins(C) into legs(E1&E2).
(5 each.)
Right leg(E1)
C
C
C
C
E
C
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
SRDRT2BF-LRDDS7135-VRDDS7135- INSTRUCTIONS
You will need 2 person(s) for this assembly.
B
E2
Left leg(E2)
C
C C
C
E
C
Any problems or questions call Regency Office Furniture at 1-866-816-9822
C
F
STEP 2 : Lay modesty(H) down so the cam locks
face up and connect right leg(E1) to the modesty by
inserting cam pins(C) into locks. DO NOT TIGHTEN
CAM LOCKS YET.
D
G
H
H
Fig. 1a
E