Page 1
Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
Page 2
HARDWARE PLACEMENT ON RETURN LEG(LG-D) DEPENDS ON LEFT RETURN & RIGHT RETURN ORIENTATIONS. PLEASE EXAMINE CAREFULLY. STEP 1A : Insert 2 Locking Screws(M) and 2 Wood Cam Pins(H) into Return Leg(LG-D) as shown below. LG-D LG-D Left Return Right Return Any problems or questions call Regency Office Furniture at 1-866-816-9822...
Page 3
Leg(LG-D) by inserting and locking cam pins (Figure 1). NOTE: Cam Locks face the interior of the Return. Be sure to support opposite end of Modesty. LG-D LG-D MP-G TT-C Any problems or questions call Regency Office Furniture at 1-866-816-9822...
Page 4
Return Top(TT-C) to Desk Top with 2 Flat Brackets(F) using 4 Short Bolts(L) per bracket. Finish by concealing Cam Locks with Cam Caps(K) & Insert Covers(J). TT-C MP-G STEP 6 : For additional stability, attach Corner Brackets(O) to Leg(LG-D) and the Modesty(MP-G) with 6 Wood Screws(P) per Corner Bracket. Any problems or questions call Regency Office Furniture at 1-866-816-9822...