Regency LEGACY STORAGE CABINET LSC2935 Instructions

LEGACY STORAGE CABINET • LSC2935 • INSTRUCTIONS
Organize your parts and hardware. You will need a Phillips head and flat head screw driver and rubber mallet.
Hardware :
A: Mounting Bracket(4) • B: Hinge(4) • C: Lock Lip • D: Door Tooth(2) E: Small Screw(4) F: Cam Locks(8)
G: Cam Pins(8) • H: Medium Screws(32) • I: Shelf Pins(4) • J: Adjustable Glides(4) K: Large Screws(4) •
L: Door Handles(2) • M: Keys(2)
A B C
Parts :
N: Back • O: Front Lip • P: Bottom • Q: Sides(2) R: Shelf • S: Top • T: Door(2)
N
O
STEP 1 : Insert 4 cam pins(G) into top(S).
G
G
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
D F
E
P
G
S
G
Any problems or questions call Regency Office Furniture at 1-866-816-9822
G H J
I
Q R
STEP 2 :Attach brackets(A) to sides(Q) using
pre drilled holes with 2 medium screws(H)
each bracket(4). Also insert 2 cam pins(G) and
2 cam locks(F) in sides(Q).
K L M
S
G
Q
G A A
T
F
F