Advertisement
You will need a Phillips Head Screw Driver and a Rubber Mallet to Assemble.
STEP 3 :
insert 6 cam pins(C) and 2 dowel rods(F) to bottom of table top.
H
C
STEP 4 : Insert 2 Cam Pins(C) and 2 Dowel rods(F) in each
leg(J).
J
LCTRT12047, VCTRT12047 - INSTRUCTIONS
You will need 2 person(s) for this assembly.
C
F
C
3 screws on each side of gap) Also
A
C
F
A
STEP 5 : Lay one leg(J) down with cam pins(C) and dowel
rods(F) facing up and connect stringer(I) to leg(J) by insert-
ing cam pins into locks and tightening.
C
H
C
I
J
Advertisement
