Uploading Firmware And Configuration Files; Firmware File Upload; Figure 28-11 Restore Configuration Example; Figure 28-12 Successful Restoration Confirmation Screen - ZyXEL Communications ZyAIR Wireless Gateway Series User Manual

ZyAIR Wireless Gateway Series User's Guide
Step 4. After a successful restoration you will see the following screen. Press any key to restart the
ZyAIR and return to the SMT menu.

Figure 28-12 Successful Restoration Confirmation Screen

28.4 Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can upload configuration files
by following the procedure in the previous Restore Configuration section or by following the instructions in
Menu 24.7.2 – System Maintenance – Upload System Configuration File (for console port).
DO NOT INTERUPT THE FILE TRANSFER PROCESS AS THIS MAY

28.4.1 Firmware File Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the ZyAIR, you will see the following screens for uploading firmware and the
configuration file using FTP.
28-10

Figure 28-11 Restore Configuration Example

Save to ROM
Hit any key to start system reboot.
WARNING!
PERMANENTLY DAMAGE YOUR ZYAIR.
Type the configuration file's
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.
Firmware and Configuration File Maintenance