Table of Contents
Advertisement
ZyAIR Wireless Gateway Series User's Guide
29.2 Call Control Support
The ZyAIR provides two call control functions: budget management and call history. Please note that this
menu is only applicable when Encapsulation is set to PPPoE or PPTP in menu 4 or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of the ZyAIR
within certain times. When the total outgoing call time exceeds the limit, the current call will be dropped
and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System Maintenance -
Call Control, as shown in the next table.
Figure 29-3 Menu24.9 System Maintenance : Call Control
29.2.1 Budget Management
Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu 24.9 - System
Maintenance - Call Control to bring up the following menu.
Remote Node
1.ChangeMe
The total budget is the time limit on the accumulated time for outgoing calls to a remote node. When this
limit is reached, the call will be dropped and further outgoing calls to that remote node will be blocked.
29-2
Menu 24.9 - System Maintenance - Call Control
1. Budget Management
2. Call History
Enter Menu Selection Number:
Menu 24.9.1 - Budget Management
Connection Time/Total Budget
No Budget
Reset Node (0 to update screen):
Figure 29-4 Menu 24.9.1 Budget Management
Elapsed Time/Total Period
No Budget
System Maintenance and SMT Menu 24.8 to 24.10
Advertisement
Chapters
Table of Contents
