Wan Setup; Figure 18-3 Menu 2 Wan Setup; Table 18-3 Menu 2 Wan Setup - ZyXEL Communications ZyAIR Wireless Gateway Series User Manual

FIELD
Press [SPACE BAR] to select Yes and then press [ENTER] to
update the IP address of the host name(s) to the IP address
User Specified IP
specified below.
Address
Only select Yes if the ZyAIR uses or is behind a static public IP
address.
Enter the static public IP address if you select Yes in the User
IP Address
Specified IP Addr field.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.

18.2 WAN Setup

The MAC address field allows users to configure the WAN port's MAC address by either using the factory
default or cloning the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the rom file (ZyNOS configuration file). It will not change unless you change the
setting or upload a different rom file.
ZyXEL recommends you clone the MAC address from a workstation on your LAN
even if your ISP does not require MAC address authentication.
From the main menu, enter 2 to display Menu 2-WAN Setup screen as shown.
The following table describes the fields in this menu.
FIELD
MAC Address
General and WAN Setup
Table 18-2 Menu 1.1 Configure Dynamic DNS
DESCRIPTION
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 18-3 Menu 2 WAN Setup

Table 18-3 Menu 2 WAN Setup

DESCRIPTION
ZyAIR Wireless Gateway Series User's Guide
EXAMPLE
No
N/A
EXAMPLE
18-5