Wireless Lan Setup; Table 19-3 Menu 3.2.1 Ip Alias Setup - ZyXEL Communications ZyAIR Wireless Gateway Series User Manual

ZyAIR Wireless Gateway Series User's Guide
FIELD
IP Alias Choose Yes to configure the LAN network for the ZyAIR.
IP Address Enter the IP address of your ZyAIR in dotted decimal notation
IP Subnet Mask Your ZyAIR will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting,
use the subnet mask computed by the ZyAIR
RIP Direction
Press [
Both, In Only or Out Only.
Version
Press [
RIP-2B or RIP-2M.
Incoming Enter the filter set(s) you wish to apply to the incoming traffic between
Protocol Filters this node and the ZyAIR.
Outgoing Enter the filter set(s) you wish to apply to the outgoing traffic between
Protocol Filters this node and the ZyAIR.
When you have completed this menu, press [
your configuration, or press [

19.4 Wireless LAN Setup

Use menu 3.5 to set up your ZyAIR as the wireless access point. To edit menu 3.5, enter 3 from the main
menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display
Menu 3.5 – Wireless LAN Setup as shown next.
19-6

Table 19-3 Menu 3.2.1 IP Alias Setup

DESCRIPTION
SPACE BAR
] to select the RIP direction. Choices are None,
SPACE BAR]
to select the RIP version. Choices are RIP-1,
ENTER
ESC
] at any time to cancel.
] at the prompt "Press ENTER to Confirm..." to save
EXAMPLE
Yes
192.168.1.1
255.255.255.0
None
RIP-1
LAN Setup