ZyXEL Communications Prestige 650H-E Series Manual page 23

LABEL
Destination IP
Service
Action
Log
Rules Reorder
To Rule Number
Move
Follow these directions to create a new rule.
Step 1. In the Summary screen, click a rule's index number. The Edit Rule screen opens.
Step 2.
In the Available Services text box, select the services you want. Configure customized
ports for services not predefined by the Prestige by clicking the Add or Edit buttons
under Custom Port. For a comprehensive list of port numbers and services, visit the
IANA (Internet Assigned Number Authority) web site.
Step 3.
Configure the Source Address and Destination Address for the rule.
Prestige 650H-E
Table 6 Rule Summary
This drop-down list box displays the destination addresses or ranges of addresses to
which this firewall rule applies. Please note that a blank source or destination address is
equivalent to Any.
This drop-down list box displays the services to which this firewall rule applies. Please
note that a blank service type is equivalent to Any.
This is the specified action for that rule, either Block or Forward. Note that Block means
the firewall silently discards the packet.
This field shows you if a log is created for packets that match the rule (Match), don't
match the rule (Not Match), both (Both) or no log is created (None).
You may reorder your rules using this function. Select the rule you want to move. The
ordering of your rules is important as rules are applied in turn.
Select the number you want to move the rule to.
Click Move to move the rule.
DESCRIPTION
23