ZyXEL Communications Prestige 650H-E Series Manual page 22

The following table describes the labels in this screen.
LABEL
The default action
for packets not
matching following
rules
Default Permit Log
The following read-only fields summarize the rules you have created that apply to traffic traveling in the selected
packet direction. The firewall rules that you configure (summarized below) take priority over the general firewall
action settings above.
No.
Source IP
Figure 20 Rule Summary
Table 6 Rule Summary
Should packets that do not match the following rules be blocked or forwarded? Make your
choice from the drop down list box. Note that "block" means the firewall silently discards
the packet.
Click this check box to log all matched rules in the ACL default set.
This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn. The Move field below allows you to reorder your rules.
This drop-down list box displays the source addresses or ranges of addresses to which
this firewall rule applies. Please note that a blank source or destination address is
equivalent to Any.
Prestige 650H-E
DESCRIPTION
22