ZyXEL Communications Prestige 650H-E Series Manual page 17

If you do not assign an IP Address, then all packets received for ports not
From the main screen click Advanced Setup and then NAT to open the main NAT screen. Select
SUA Only and click Edit Details.
The following table describes the labels in this screen.
LABEL
Start Port Type a port number in this field. To forward only one port, type the port number again in the
No. End Port field. To forward a series of ports, type the start port number here and the end port
number in the End Port field.
End Port Type a port number in this field. To forward only one port, type the port number in the Start
No. Port field above and then type it again in this field. To forward a series of ports, type the last
port number in a series that begins with the port number in the Start Port field above.
IP Address Enter the inside IP address of the server here.
Prestige 650H-E
specified in this screen will be discarded.
Figure 15 SUA/NAT Server
Table 4 SUA/NAT Server
DESCRIPTION
17