Figure 14-5 Menu 24.6 -Restore Configuration Using The Console Port; Figure 14-6 Send File - ZyXEL Communications Prestige 480 User Manual

Prestige 480 Dual BRI ISDN Router
Please note that the system reboots automatically after the file transfer process is complete.
FTP or TFTP are the preferred methods for restoring your current workstation
configuration to your Prestige since FTP or TFTP is faster. Please note that
the system reboots automatically after the file transfer process is complete.
Step 1.
Go to Menu 24.6 .
Step 2.
Press "Y" to indicate that you want to continue. The following procedure is for the
HyperTerminal program. The procedure for other serial communications programs should be
similar.
Step 3.
Click "Transfer" in the HyperTerminal toolbar, then "Send File" in the popup menu to display the
following screen.
Enter where the rom configuration file is on your computer, and make sure you choose
Step 4.
the X-Modem Protocol. Then press "Send".
After a successful restoration you will see the following screen. Press any key to return
Step 5.
to reboot the system
Save to ROM
Hit any key to start system reboot.
Backup, Restore and Upload
Menu 24.6 - Restore Configuration
Figure 14-5 Menu 24.6 –Restore Configuration using the Console Port

Figure 14-6 Send File

.
Enter where you want to place
the rom configuration file on
your computer.
Choose the
X-Modem
Protocol.
14-5