16 ELECTRICAL SYSTEM
16.8
214
Checking the headlight setting
400726-10
Guideline
A
Insert holding lug
into cut-out
–
Insert the screw and first turn counterclockwise until it
engages in the thread with a small jerk. Tighten the screw
lightly.
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertical to the wall at distance
the wall and switch on the low beam.
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and passen-
ger if applicable.
–
Check the headlight setting.
B
.
B
under the first marking.
5 cm (2 in)
A
from
5 m (16 ft)