Service Schedule 11; Additional Information; Required Work - KTM 390 Adventure 2020 Owner's Manual

Table of Contents

Advertisement

11.1

Additional information

Any further work that results from the compulsory work or from the recommended work must be ordered sepa-
rately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
Individual service intervals and scopes may change in the course of technical developments. The most up-to-date
service schedule can always be found on KTM Dealer.net. Your authorized KTM dealer will be happy to advise
you.
11.2

Required work

Read out the fault memory using the KTM diagnostics tool.
Program the shift shaft sensor.
Check that the electrical system is functioning properly.
Change the engine oil and the oil filter, clean the oil screens.
Check the brake discs. (
p. 166)
Check the front brake linings. (
Check the rear brake linings. (
Check the brake lines for damage and leakage.
(Option: Shift shaft sensor activated)
p. 172)
p. 181)

SERVICE SCHEDULE 11

every 12 months
every 15,000 km (9,300 mi)
every 7,500 km (4,650 mi)
after 1,000 km (620 mi)
(
p. 235)
every 24 months
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

F5375t5F5375t6

Table of Contents