ZyXEL Communications Omni 288S User Manual page 74

Response
+FIS:vr, br, wd, ln
df, ec, bf, st
+FNC:
"NSC FIF string"
+FNF:
"NSF FIF string"
+FNS:
"NSS FIF string"
+FPI:
"CIG ID string"
+FPO
+FPS:ppr, lc, blc,
cblc, lbc
+FTC: vr, br, wd, ln,
df, ec, bf, st
Chapter 9 - Fax Operation
Value Function and Description
hsc= Transmit phase B hang up codes. Refer to
20-3F TIA-592 for details.
hsc= Transmit phase C hang up codes. Refer to
40-4F TIA-592 for details.
hsc= Transmit phase D hang up codes. Refer to
50-6F TIA-592 for details.
hsc= Receive phase B hang up codes. Refer to TIA-
70-8F 592 for details.
hsc= Receive phase C hang up codes. Refer to TIA-
90-9F 592 for details.
hsc= Receive phase D hang up codes. Refer to TIA-
A0-BF 592 for details.
emote fax station capabilities (DIS frame
information) response refer to +FIS=...
command for a description of sub-parameters.
Report NSC (non-standard Commands) frame
Report NSF (non-standard Facilities) frame.
Report NSS (non-standard Setup) frame.
Report remote ID response-Polling Station ID
(CIG).
Remote polling indication.
.30 phase C page reception response:
ppr=1 Received page good.
ppr=2 Page bad; retrain requested.
ppr=3 Page good; retrain requested.
ppr=4 Page good; remote request for procedure
interrupt accepted.
ppr=5 Page bad; retrain requested; remote request
for procedure interrupt accepted.
The receiving DCE may count <lc>, <blc>,
<cblc> and <lbc> due to DCE buffer overflow
and report them:
lc: line count
blc: bad line count
cblc: maximum consecutive bad line count
lbc: lost byte count
emote fax station capabilities (DCT frame
information) response refer to +FIS=...
command for the description of sub-
9-12