ZyXEL Communications Omni 288S User Manual page 114

Command bit
6
7
S45=
S46=
S48= bit
0
1
2
3
4
5
S49= bit
3-0
7
7
S50=
Chapter 12 - Status Registers & Result Codes
dec hex
64 40
128 80
dec hex
0-255 0-FF
dec hex
0-255 0-FF
dec hex
1 1
2 2
4 4
8 8
16 10
32 20
dec hex
0-15 0-FF
0 0
128 80
dec hex
Function and description
When selected with '&B0', DTE speed fixed
at 38400 when the link speed is above 9600.
DTE speed fixed at 9600 if link speed is 7200,
DTE speed follows link speed. When selected
with &B1, DTE speed fixed at current rate
when an ARQ connection is made, when a
non-ARQ connection is made, DTE speed
follows the link speed. (See also S18)
Enable UK (Australian, Singapore, Indian,
etc.,) type short-to-short (discontinuous) ring-
back detection.
Delay during which the CND silence detection
is disabled, in 20 ms units. (See also S46)
CND silence detection interval
To process the CND, silence must be
detected for the specified interval, in 20 ms
units
Bit-mapped register
Cause CND information to be reported in raw
format
Enable DATA ONLY mode. Auto-detect
V.34/ZyX/V.32bis/V.22bis/V.23/V.21 Bell
103 when answering. If the connection try
fails, the modem will continuously recycle the
handshaking procedure until the S7 register
times out.
Enable data calling tone (CNG) sending
Reverse the V.23 channel speed. Originate
mode modem speed (Send/Receive) 1200/75;
Answer mode modem speed (Send/Receive)
75/1200
(Work with &D1 command) DTR ON will
have the modem dial the default number and
DTR OFF will have the modem hang-up and
reset to profile 0. When the modem is idle
(waiting for command), it will not dial any
number when DTR changes from ON to OFF
Enable IS-101 command set. Set this bit to 0
to make voice command compatible with U-
1496
Bit-mapped register
Set cellular mode transmit power level -9 to -
24 dBm. (See also S43b2)
For cellular mode only. Modem is installed in
office (Default)
For cellular mode only. Modem is connected
to a mobile phone
Inactively timer, in 10 second units
12-8
Ref.
&Bn
+087
+003
+000
&N12
+006
+000